Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ata2.00: failed to IDENTIFY err_mask=0x104 [partly solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 545
Location: Halle (Saale), Germany

PostPosted: Wed Jan 31, 2007 10:49 am    Post subject: ata2.00: failed to IDENTIFY err_mask=0x104 [partly solved] Reply with quote

Hi folks,

I got a nasty bug when booting my linux box which delays boot:

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6, max UDMA/133, 640 sectors: LBA
ata2.00: ata2: dev 0 multi count 1
ata2.00: configured for UDMA/133
scsi2 : ahci

I am using vanilla kernel 2.6.20_rc5 (same Problem with 2.6.19)
I need a version > 2.6.18 for jmicron sata controller support

My Kernel .config can be found here (stripped of comments)
sed -e 's/^#.*//;/^$/d' -i .config
http://rafb.net/p/k9yNEq80.html

or the complete .config here
http://rafb.net/p/a1AbQo19.html

I hope the "BUG: soft lockup detected on CPU#0!"
on the bottom of dmsg output is related to sata2 bug?

I'll attach my complete dmsg and lspci output here if someone searches for simmilar issues:

lspci outpu:
Quote:

00:00.0 Host bridge: Intel Corporation 975X Express Memory Controller Hub (rev c0)
00:01.0 PCI bridge: Intel Corporation 975X Express PCI Express Root Port (rev c0)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 Multimedia audio controller: Creative Labs Unknown device 0005
01:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
01:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
06:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)



dmsg output:
Quote:

Linux version 2.6.20-rc5 (root@freax) (gcc-Version 4.1.1 (Gentoo 4.1.1-r1)) #12 SMP Thu Jan 25 02:16:04 CET 2007
Command line: root=/dev/sda3 "irqpoll" all-generic-ide video=vesafb:1280x1024-32@85,mtrr,ywrap splash=silent,fadein,theme:livecd-2006.0 fbcon=scrollback:128K CONSOLE=/dev/tty1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000faf20
ACPI: XSDT (v001 A_M_I_ OEMXSDT 0x12000608 MSFT 0x00000097) @ 0x000000007ff80100
ACPI: FADT (v003 A_M_I_ OEMFACP 0x12000608 MSFT 0x00000097) @ 0x000000007ff80290
ACPI: MADT (v001 A_M_I_ OEMAPIC 0x12000608 MSFT 0x00000097) @ 0x000000007ff80390
ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x12000608 MSFT 0x00000097) @ 0x000000007ff8e040
ACPI: HPET (v001 A_M_I_ OEMHPET 0x12000608 MSFT 0x00000097) @ 0x000000007ff893e0
ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x12000608 MSFT 0x00000097) @ 0x000000007ff89420
ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20060113) @ 0x000000007ff8e0b0
ACPI: SSDT (v001 AMI CPU2PM 0x00000001 INTL 0x20060113) @ 0x000000007ff8e280
ACPI: DSDT (v001 A0543 A0543000 0x00000000 INTL 0x20060113) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000007ff80000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007ff80000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 524160
On node 0 totalpages: 524063
DMA zone: 56 pages used for memmap
DMA zone: 1691 pages reserved
DMA zone: 2252 pages, LIFO batch:0
DMA32 zone: 7110 pages used for memmap
DMA32 zone: 512954 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 36416 bytes of per cpu data
Built 1 zonelists. Total pages: 515206
Kernel command line: root=/dev/sda3 "irqpoll" all-generic-ide video=vesafb:1280x1024-32@85,mtrr,ywrap splash=silent,fadein,theme:livecd-2006.0 fbcon=scrollback:128K CONSOLE=/dev/tty1
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Memory: 2057488k/2096640k available (3531k kernel code, 38764k reserved, 1966k data, 332k init)
Calibrating delay using timer specific routine.. 4831.55 BogoMIPS (lpj=2415775)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 16667240
Detected 16.667 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 8527.67 BogoMIPS (lpj=4263838)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2400.085 MHz processor.
migration_cost=182
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Boot video device is 0000:06:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 23
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ebaff800-ebafffff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ebe00000-efefffff
PREFETCH window: c3500000-e34fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: c3400000-c34fffff
PCI: Bridge: 0000:00:1c.3
IO window: b000-bfff
MEM window: ebd00000-ebdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: a000-afff
MEM window: ebc00000-ebcfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 9000-9fff
MEM window: ebb00000-ebbfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 8000-8fff
MEM window: e3600000-ebafffff
PREFETCH window: c3300000-c33fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.27 [Flags: R/W].
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
intel_rng: FWH not detected
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000eaf58e]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 v1.10 addr 0xebdfc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:18:f3:84:4f:8a
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 v1.10 addr 0xebcfc000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth1: addr 00:18:f3:84:43:74
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbcore: registered new interface driver irda-usb
USB IrDA support registered
usbcore: registered new interface driver stir4200
usbcore: registered new interface driver mcs7780
netconsole: not configured, aborting
Linux video capture interface: v2.00
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000054900 ctl 0x0 bmdma 0x0 irq 1272
ata2: SATA max UDMA/133 cmd 0xFFFFC20000054980 ctl 0x0 bmdma 0x0 irq 1272
ata3: SATA max UDMA/133 cmd 0xFFFFC20000054A00 ctl 0x0 bmdma 0x0 irq 1272
ata4: SATA max UDMA/133 cmd 0xFFFFC20000054A80 ctl 0x0 bmdma 0x0 irq 1272
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 145226112 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6, max UDMA/133, 640 sectors: LBA
ata2.00: ata2: dev 0 multi count 1
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7, max UDMA/133, 145226112 sectors: LBA48 NCQ (depth 31/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
SCSI device sdb: 640 512-byte hdwr sectors (0 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 640 512-byte hdwr sectors (0 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 2:0:0:0: Attached scsi disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ata5: SATA max UDMA/133 cmd 0xFFFFC20000068100 ctl 0x0 bmdma 0x0 irq 17
ata6: SATA max UDMA/133 cmd 0xFFFFC20000068180 ctl 0x0 bmdma 0x0 irq 17
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.00ac7
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata7: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
scsi6 : ata_piix
ata7.00: ATAPI, max UDMA/66
ata7.00: configured for UDMA/66
scsi7 : ata_piix
ATA: abnormal status 0x7F on port 0x177
scsi 6:0:0:0: CD-ROM PLEXTOR DVDR PX-760A 1.06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg3 type 5
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.1 to 64
ata9: PATA max UDMA/100 cmd 0x9C00 ctl 0x9882 bmdma 0x9400 irq 16
ata10: PATA max UDMA/100 cmd 0x9800 ctl 0x9482 bmdma 0x9408 irq 16
scsi8 : pata_jmicron
ata9.00: ATAPI, max UDMA/33
ata9.00: configured for UDMA/33
scsi9 : pata_jmicron
ATA: abnormal status 0x7F on port 0x9807
scsi 8:0:0:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.03 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray
sr 8:0:0:0: Attached scsi CD-ROM sr1
sr 8:0:0:0: Attached scsi generic sg4 type 5
I2O subsystem v1.325
i2o: max drivers = 8
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
Fusion MPT SAS Host driver 3.04.02
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xefffbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-7: new high speed USB device using ehci_hcd and address 6
usb 1-7: configuration #1 chosen from 1 choice
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 1-2.2: new full speed USB device using ehci_hcd and address 7
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-7.3: new high speed USB device using ehci_hcd and address 8
usb 1-7.3: configuration #1 chosen from 1 choice
usb 3-2.1: new low speed USB device using uhci_hcd and address 4
usb 3-2.1: configuration #1 chosen from 1 choice
usb 3-2.3: new low speed USB device using uhci_hcd and address 5
usb 3-2.3: configuration #1 chosen from 1 choice
usb 3-2.4: new low speed USB device using uhci_hcd and address 6
usb 3-2.4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
HID device not claimed by input or hiddev
input: Saitek Saitek P750 as /class/input/input2
input: USB HID v1.00 Joystick [Saitek Saitek P750] on usb-0000:00:1d.1-2.1
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2.3
input: Logitech USB Receiver as /class/input/input4
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2.3
input: Logitech USB Receiver as /class/input/input5
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2.4
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
Bluetooth: Virtual HCI driver ver 1.2
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.1
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.8
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.1
usbcore: registered new interface driver bfusb
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
IrCOMM protocol (Dag Brattli)
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
ACPI: (supports S0 S1 S3 S4 S5)
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 332k freed
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
bttv0: Bt878 (rev 17) at 0000:01:01.0, irq: 22, latency: 64, mmio: 0xc33fe000
bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is bd11:1200
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff33ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=12 tuner=5 radio=no stereo=no
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:06:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sky2 eth1: enabling interface
sky2 eth1: ram buffer 48K
ADDRCONF(NETDEV_UP): eth1: link is not ready
**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 6:00.0] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 6:00.0] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 6:00.0] forgot to specify physical device; fix it!
eth0: no IPv6 routers present
hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb ffff810078f07428 err -38
hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb ffff810078f07428 err -38
operapluginwrap[8209]: segfault at 00000000000004d1 rip 00000000f7dba9f6 rsp 00000000ff98d720 error 4
BUG: soft lockup detected on CPU#0!

Call Trace:
<IRQ> [<ffffffff80254ba1>] softlockup_tick+0xdb/0xed
[<ffffffff8023b6d4>] update_process_times+0x42/0x68
[<ffffffff80217c62>] smp_local_timer_interrupt+0x34/0x55
[<ffffffff80218329>] smp_apic_timer_interrupt+0x52/0x6a
[<ffffffff8020a136>] apic_timer_interrupt+0x66/0x70
[<ffffffff804bd474>] pci_conf1_read+0x0/0xc6
[<ffffffff80254e58>] handle_IRQ_event+0x1a/0x53
[<ffffffff8025639e>] handle_edge_irq+0xec/0x132
[<ffffffff8020bb34>] do_IRQ+0x100/0x15c
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
[<ffffffff8044f8e1>] ata_scsi_qc_complete+0x0/0x20f
[<ffffffff80237a09>] __do_softirq+0x4a/0xc3
[<ffffffff80219c84>] ack_apic_level+0x33/0x47
[<ffffffff8020a68c>] call_softirq+0x1c/0x28
[<ffffffff8020b9e3>] do_softirq+0x2c/0x7d
[<ffffffff8020bb6d>] do_IRQ+0x139/0x15c
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff8056b8e8>] thread_return+0x56/0xed
[<ffffffff80208964>] mwait_idle+0x0/0x48
[<ffffffff8020891d>] cpu_idle+0xac/0xae
[<ffffffff807a06d8>] start_kernel+0x218/0x21d
[<ffffffff807a015c>] _sinittext+0x15c/0x160

irq 1272: nobody cared (try booting with the "irqpoll" option)

Call Trace:
<IRQ> [<ffffffff80255837>] __report_bad_irq+0x30/0x7d
[<ffffffff80255a65>] note_interrupt+0x1e1/0x224
[<ffffffff802563b3>] handle_edge_irq+0x101/0x132
[<ffffffff8020bb34>] do_IRQ+0x100/0x15c
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
[<ffffffff8044f8e1>] ata_scsi_qc_complete+0x0/0x20f
[<ffffffff80237a09>] __do_softirq+0x4a/0xc3
[<ffffffff80219c84>] ack_apic_level+0x33/0x47
[<ffffffff8020a68c>] call_softirq+0x1c/0x28
[<ffffffff8020b9e3>] do_softirq+0x2c/0x7d
[<ffffffff8020bb6d>] do_IRQ+0x139/0x15c
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff8056b8e8>] thread_return+0x56/0xed
[<ffffffff80208964>] mwait_idle+0x0/0x48
[<ffffffff8020891d>] cpu_idle+0xac/0xae
[<ffffffff807a06d8>] start_kernel+0x218/0x21d
[<ffffffff807a015c>] _sinittext+0x15c/0x160

handlers:
[<ffffffff80454f9d>] (ahci_interrupt+0x0/0x3cd)
Disabling IRQ #1272
operapluginwrap[8324]: segfault at 00000000000004d1 rip 00000000f7d919f6 rsp 00000000ffd0b2a0 error 4
BUG: soft lockup detected on CPU#0!

Call Trace:
<IRQ> [<ffffffff80254ba1>] softlockup_tick+0xdb/0xed
[<ffffffff8023b6d4>] update_process_times+0x42/0x68
[<ffffffff80217c62>] smp_local_timer_interrupt+0x34/0x55
[<ffffffff80218329>] smp_apic_timer_interrupt+0x52/0x6a
[<ffffffff8020a136>] apic_timer_interrupt+0x66/0x70
[<ffffffff804bd474>] pci_conf1_read+0x0/0xc6
[<ffffffff80254e58>] handle_IRQ_event+0x1a/0x53
[<ffffffff8025639e>] handle_edge_irq+0xec/0x132
[<ffffffff8020a68c>] call_softirq+0x1c/0x28
[<ffffffff8020bb34>] do_IRQ+0x100/0x15c
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff8056d433>] _spin_unlock_irqrestore+0x8/0x9
[<ffffffff8044bb77>] ata_hsm_move+0x214/0x668
[<ffffffff80244abe>] keventd_create_kthread+0x0/0x65
[<ffffffff8044e585>] ata_pio_task+0x0/0xe9
[<ffffffff8044e661>] ata_pio_task+0xdc/0xe9
[<ffffffff80241754>] run_workqueue+0x8f/0x137
[<ffffffff80242059>] worker_thread+0x0/0x14a
[<ffffffff80244abe>] keventd_create_kthread+0x0/0x65
[<ffffffff8024216d>] worker_thread+0x114/0x14a
[<ffffffff8022d0d7>] default_wake_function+0x0/0xe
[<ffffffff80244d14>] kthread+0xd1/0x101
[<ffffffff8020a318>] child_rip+0xa/0x12
[<ffffffff80244abe>] keventd_create_kthread+0x0/0x65
[<ffffffff80244c43>] kthread+0x0/0x101
[<ffffffff8020a30e>] child_rip+0x0/0x12

operapluginwrap[8369]: segfault at 00000000000004d1 rip 00000000f7d369f6 rsp 00000000ffaf9090 error 4


Last edited by blubbi on Wed Jan 31, 2007 11:12 pm; edited 1 time in total
Back to top
View user's profile Send private message
shiver
n00b
n00b


Joined: 04 Nov 2006
Posts: 10

PostPosted: Wed Jan 31, 2007 2:45 pm    Post subject: Reply with quote

You obviously have an Asus P5W Deluxe motherboard, I have the same issue. The ata2 delay is a libata problem in kernels >= 2.6.18 when using ahci for the ICH7R controllers. The EZ raid chip is causing it, I'm not sure if the problem goes away if you plug something into the ez raid connectors, I only have one sata drive plugged to ICH7R.
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 545
Location: Halle (Saale), Germany

PostPosted: Wed Jan 31, 2007 8:16 pm    Post subject: Reply with quote

Right, I forgott to mention my Mainboard. Indeed it is a Asus P5W DH Delux!

Interesing, I disabled the EZ thing in my Bios settings.
I thought when disabeling the EZ raid chip only the ICH7 and jmicron chips ar active.

Would be nice if there was an option to completely disable the EZ raid chip.

Bu I will try and plug one of my two Disks into the EZ-Raid chip.
Stand by, I'll report in a few hours!

Thanks
blubbi
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 545
Location: Halle (Saale), Germany

PostPosted: Wed Jan 31, 2007 11:09 pm    Post subject: Reply with quote

Okay, it did the trick.

I just connected my second hard disk to the EZ-Raid-chip and now the bug is gone!

So the best temporarily solutions semms to be a connected device to the EZ-Raid-chip.

I still have a cpu softlock, but I don't know how to resolv this:
Quote:

hci_usb_intr_rx_submit: hci0 intr rx submit failed urb ffff810078e1cce8 err -28
BUG: soft lockup detected on CPU#0!

Call Trace:
<IRQ> [<ffffffff80254ba1>] softlockup_tick+0xdb/0xed
[<ffffffff8023b6d4>] update_process_times+0x42/0x68
[<ffffffff80217c62>] smp_local_timer_interrupt+0x34/0x55
[<ffffffff80218329>] smp_apic_timer_interrupt+0x52/0x6a
[<ffffffff8020a136>] apic_timer_interrupt+0x66/0x70
[<ffffffff804bd474>] pci_conf1_read+0x0/0xc6
[<ffffffff80254e58>] handle_IRQ_event+0x1a/0x53
[<ffffffff8025639e>] handle_edge_irq+0xec/0x132
[<ffffffff8020bb34>] do_IRQ+0x100/0x15c
[<ffffffff80208964>] mwait_idle+0x0/0x48
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff802089a6>] mwait_idle+0x42/0x48
[<ffffffff802088fc>] cpu_idle+0x8b/0xae
[<ffffffff807a06d8>] start_kernel+0x218/0x21d
[<ffffffff807a015c>] _sinittext+0x15c/0x160

irq 18: nobody cared (try booting with the "irqpoll" option)

Call Trace:
<IRQ> [<ffffffff80255837>] __report_bad_irq+0x30/0x7d
[<ffffffff80255a65>] note_interrupt+0x1e1/0x224
[<ffffffff8025628b>] handle_fasteoi_irq+0x9e/0xc5
[<ffffffff8020bb34>] do_IRQ+0x100/0x15c
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
[<ffffffff804bd474>] pci_conf1_read+0x0/0xc6
[<ffffffff80254e58>] handle_IRQ_event+0x1a/0x53
[<ffffffff8025639e>] handle_edge_irq+0xec/0x132
[<ffffffff8020bb34>] do_IRQ+0x100/0x15c
[<ffffffff80208964>] mwait_idle+0x0/0x48
[<ffffffff80209a81>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff802089a6>] mwait_idle+0x42/0x48
[<ffffffff802088fc>] cpu_idle+0x8b/0xae
[<ffffffff807a06d8>] start_kernel+0x218/0x21d
[<ffffffff807a015c>] _sinittext+0x15c/0x160

handlers:
[<ffffffff8048137c>] (usb_hcd_irq+0x0/0x52)
Disabling IRQ #18



Here again the dmsg output now just the relevant part:
Quote:

ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000054900 ctl 0x0 bmdma 0x0 irq 1272
ata2: SATA max UDMA/133 cmd 0xFFFFC20000054980 ctl 0x0 bmdma 0x0 irq 1272
ata3: SATA max UDMA/133 cmd 0xFFFFC20000054A00 ctl 0x0 bmdma 0x0 irq 1272
ata4: SATA max UDMA/133 cmd 0xFFFFC20000054A80 ctl 0x0 bmdma 0x0 irq 1272
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 145226112 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48
ata2.00: ata2: dev 0 multi count 1
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA External Disk 0 RGL1 PQ: 0 ANSI: 5
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ata5: SATA max UDMA/133 cmd 0xFFFFC20000068100 ctl 0x0 bmdma 0x0 irq 17
ata6: SATA max UDMA/133 cmd 0xFFFFC20000068180 ctl 0x0 bmdma 0x0 irq 17
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.00ac7
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata7: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
scsi6 : ata_piix
ata7.00: ATAPI, max UDMA/66
ata7.00: configured for UDMA/66
scsi7 : ata_piix
ATA: abnormal status 0x7F on port 0x177
scsi 6:0:0:0: CD-ROM PLEXTOR DVDR PX-760A 1.06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg2 type 5
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.1 to 64
ata9: PATA max UDMA/100 cmd 0x9C00 ctl 0x9882 bmdma 0x9400 irq 16
ata10: PATA max UDMA/100 cmd 0x9800 ctl 0x9482 bmdma 0x9408 irq 16
scsi8 : pata_jmicron
ata9.00: ATAPI, max UDMA/33
ata9.00: configured for UDMA/33
scsi9 : pata_jmicron
ATA: abnormal status 0x7F on port 0x9807
scsi 8:0:0:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.03 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 5x/16x cd/rw xa/form2 cdda tray
sr 8:0:0:0: Attached scsi CD-ROM sr1
sr 8:0:0:0: Attached scsi generic sg3 type 5
Back to top
View user's profile Send private message
shiver
n00b
n00b


Joined: 04 Nov 2006
Posts: 10

PostPosted: Thu Feb 01, 2007 4:01 pm    Post subject: Reply with quote

Thanks for confirming my thought. I haven't been able to try plugging a drive to ez raid. Unfortunately I can't help you with the soft lockup bug. :(
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 545
Location: Halle (Saale), Germany

PostPosted: Fri Feb 02, 2007 1:31 am    Post subject: Reply with quote

No matter :-)

Thanks anyway for the great suggestion! Now my box boots way faster :-)


regards
blubbi
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 545
Location: Halle (Saale), Germany

PostPosted: Fri Feb 02, 2007 3:46 pm    Post subject: Reply with quote

SOLVED the CPU softlock

I use a preemtibel kernel with the bootflags NOAPIC and IRQPOLL
(IRQPOLL is needed for the jmicron controller, but IRQPOLL allone does not solve the softlock bug)

Disabel APIC in the BIOS works to. Than you wount need the NOAPIC bootflag

I don't know if a preemtible kernel is required because i tried booting the preemtible kernel without the NOAPIC option and I got a softlock.
So maybe NOAPIC is enough
Back to top
View user's profile Send private message
St0fF
n00b
n00b


Joined: 26 Feb 2008
Posts: 13

PostPosted: Mon May 26, 2008 9:17 am    Post subject: jmicron solution Reply with quote

Hi Guys,

I also have the same board and as the JMicron cannot handle DVD-Drives (and is too far awaay from my DVD) I got one hdd connected there (HD300LD, Samsung). For me making pata_jmicron a module worked fine. It is found and initialized by udev, the drive is there, no problems.

For me only the EZ-RAID Problem still exists. But I'm about to trying something here ...
[edit]
... which just failed. Is there any way with ata_piix to disable probing of a single device?
[/edit]

Cheers,
St0fF
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum