tboloo
Guru
Joined: 20 Jan 2006
Posts: 403
Location: Grodzisq, Poland
|
 Posted: Mon Dec 11, 2006 10:50 am Post subject: [SOLVED]pcmcia cs->ide adaptor |
 |
|
Próbuję uruchomić pcmciowy adaptor do kart CF (wszystko działało z kernelem 2.6.15). Wkompilowałem w kernel potrzebny stuff i przy włożeniu kartu do slotu dmesg wypluwa
| Code: |
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
Probing IDE interface ide1...
hdc: CF300, CFA DISK drive
hdd: probing with STATUS(0xc0) instead of ALTSTATUS(0x0a)
|
pccarctl info pokazuje
| Code: |
PRODID_1="M-Systems"
PRODID_2="CF300"
PRODID_3=""
PRODID_4=""
MANFID=000a,0000
FUNCID=4
|
pccarctrl status
| Code: | Socket 0:
3.3V 16-bit PC Card
Subdevice 0 (function 0) bound to driver "ide-cs"
|
przy próbie zamontowania karty dostaję
| Code: |
hdd: no response (status = 0x80), resetting drive
hdd: probing with STATUS(0xc0) instead of ALTSTATUS(0x0a)
ide1 at 0x100-0x107,0x10e on irq 16
hdc: max request size: 128KiB
hdc: 2015232 sectors (1031 MB) w/1KiB Cache, CHS=3936/16/32
hdc: hdc1
ide-cs: hdc: Vpp = 0.0
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev hdc.
|
Ktoś wie o co chodzi 
.::EDIT::.
Z kernelem 2.6.18-gentoo-r4 wszystko działa OK
_________________
The clock is ticking, brothers and sisters, counting down to Armageddon. |
|
Polskie forum (Polish) 
