| View previous topic :: View next topic |
| Author |
Message |
kazik1616
Tux's lil' helper
Joined: 03 Mar 2006
Posts: 117
Location: pl
|
 Posted: Fri Oct 27, 2006 1:14 pm Post subject: emerge dev-cpp/gnome-vfsmm fails. |
 |
|
When I type | Quote: | | emerge dev-cpp/gnome-vfsmm |
I am getting errors: | Quote: | ...
...
then mv -f ".deps/mime-handlers.Tpo" ".deps/mime-handlers.Plo"; else rm -f ".deps/mime-handlers.Tpo"; exit 1; fi
x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -DG_LOG_DOMAIN=\"libgnomevfsmm\" -I../../libgnomevfs -I../../libgnomevfs -pthread -DORBIT2=1 -I/usr/include/glibmm-2.4 -I/usr/lib64/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib64/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/gnome-vfs-2.0 -I/usr/lib64/gnome-vfs-2.0/include -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/gnome-vfs-module-2.0 -mtune=k8 -march=k8 -O2 -pipe -MT mime-handlers.lo -MD -MP -MF .deps/mime-handlers.Tpo -c mime-handlers.cc -fPIC -DPIC -o .libs/mime-handlers.o
../../libgnomevfs/libgnomevfsmm/mime-handlers.h:75: error: expected constructor, destructor, or type conversion before '*' token
make[4]: *** [mime-handlers.lo] Error 1
make[4]: Leaving directory `/var/tmp/portage/gnome-vfsmm-2.12.0/work/gnome-vfsmm-2.12.0/libgnomevfs/libgnomevfsmm'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/gnome-vfsmm-2.12.0/work/gnome-vfsmm-2.12.0/libgnomevfs/libgnomevfsmm'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/gnome-vfsmm-2.12.0/work/gnome-vfsmm-2.12.0/libgnomevfs'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/var/tmp/portage/gnome-vfsmm-2.12.0/work/gnome-vfsmm-2.12.0/libgnomevfs'
make: *** [all-recursive] Error 1
!!! ERROR: dev-cpp/gnome-vfsmm-2.12.0 failed.
Call stack:
ebuild.sh, line 1539: Called dyn_compile
ebuild.sh, line 939: Called src_compile
gnome-vfsmm-2.12.0.ebuild, line 30: Called gnome2_src_compile
gnome2.eclass, line 64: Called die
!!! compile failure
!!! If you need support, post the topmost build error, and the call stack if relevant.
|
My make.conf: | Quote: |
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id: /var/cvsroot/gentoo-src/portage/cnf/make.conf.amd64,v 1.5.2.4 2005/04/13 15:28:38 jstubbs Exp $
# Contains local system settings for Portage system
# Please review 'man make.conf' for more information.
# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=1
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
#
# 'ufed' is an ncurses/dialog interface available in portage to make handling
# useflags for you. 'emerge app-portage/ufed'
#
# Example:
USE="hal sse sse2 X -kde -qt -qt3 -qt4 gnome java jabber gtk gtk2 exif alsa
aac a52 -arts avahi
gif input_devices_mouse
input_devices_keyboard bash-completion jpeg mmx pdf dvd video_cards_nv
video_cards_nvidia ipv6 video_cards_v4l
video_cards_vesa video_cards_vga"
LINGUAS="pl"
INPUT_DEVICES="keyboard mouse synaptics"
VIDEO_CARDS="fbdev nv nvidia v4l vesa vga"
# Host Setting
# ============
#
CHOST="x86_64-pc-linux-gnu"
# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU.
#
# Please note that if you experience strange issues with a package, it may be
# due to gcc's optimizations interacting in a strange way. Please test the
# package (and in some cases the libraries it uses) at default optimizations
# before reporting errors to developers.
#
# -mcpu=<cpu-type> means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs. GCC 3.4 has deprecated support for
# -mcpu, so use -mtune instead if using this compiler.
#
# -march=<cpu-type> means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
# -march=i686 code will not run on a Pentium Classic.)
#
# CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp,
# athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686
# (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron),
# pentium3, and pentium4.
#
# Note that Gentoo Linux 1.4 and higher include at least gcc-3.2.
#
# amd64 CPU types supported in gcc-3.4: athlon64, opteron, k8
#
# CRITICAL WARNINGS: ****************************************************** #
# K6 markings are deceptive. Avoid setting -march for them. See Bug #24379. #
# Pentium-M CPU's should not enable sse2 until at least gcc-3.4. Bug 50616. #
# GCC 3.3 doesnt support an amd64 specific -march setting, use 3.4. #
# ************************************************************************* #
#
# Decent examples:
#
CFLAGS="-mtune=k8 -march=k8 -O2 -pipe"
#CFLAGS="-march=athlon64 -O2 -pipe"
# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings.
CXXFLAGS="${CFLAGS}"
# Advanced Masking
# ================
#
# Gentoo is using a new masking system to allow for easier stability testing
# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
# on the platform they are set for. A special form has been added that
# indicates packages and revisions that are expected to work, but have not yet
# been approved for the stable set. '~arch' is a superset of 'arch' which
# includes the unstable, in testing, packages. Users of the 'x86' architecture
# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
# '~ppc', '~sparc' are the unstable KEYWORDS for their respective platforms.
#
# Please note that this is not for development, alpha, beta, nor cvs release
# packages. "Broken" packages will not be added to testing and should not be
# requested to be added. Alternative routes are available to developers
# for experimental packages, and it is at their discretion to use them.
#
# DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
#
ACCEPT_KEYWORDS="~amd64"
# Portage Directories
# ===================
#
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#
# PORTAGE_TMPDIR is the location portage will use for compilations and
# temporary storage of data. This can get VERY large depending upon
# the application being installed.
PORTAGE_TMPDIR=/var/tmp
#
# PORTDIR is the location of the portage tree. This is the repository
# for all profile information as well as all ebuilds. If you change
# this, you must update your /etc/make.profile symlink accordingly.
PORTDIR=/usr/portage/
#
# DISTDIR is where all of the source code tarballs will be placed for
# emerges. The source code is maintained here unless you delete
# it. The entire repository of tarballs for gentoo is 9G. This is
# considerably more than any user will ever download. 2-3G is
# a large DISTDIR.
DISTDIR=${PORTDIR}/distfiles
#
# PKGDIR is the location of binary packages that you can have created
# with '--buildpkg' or '-b' while emerging a package. This can get
# upto several hundred megs, or even a few gigs.
PKGDIR=${PORTDIR}/packages
#
# PORT_LOGDIR is the location where portage will store all the logs it
# creates from each individual merge. They are stored as NNNN-$PF.log
# in the directory specified. This is disabled until you enable it by
# providing a directory. Permissions will be modified as needed IF the
# directory exists, otherwise logging will be disabled. NNNN is the
# increment at the time the log is created. Logs are thus sequential.
PORT_LOGDIR=/var/log/portage
#
# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
# concern that they will be deleted by rsync updates. Default is not
# defined.
PORTDIR_OVERLAY=/usr/local/portage
# Fetching files
# ==============
#
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available.
#
# Default fetch command (5 tries, passive ftp for firewall compatibility)
#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp \${URI} -P \${DISTDIR}"
#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp \${URI} -P \${DISTDIR}"
#
# Using wget, ratelimiting downloads
#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
#
# Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval.
# The list is a space separated list which is read left to right. If you use
# another mirror we highly recommend leaving the default mirror at the end of
# the list so that portage will fall back to it if the files cannot be found
# on your specified mirror. We _HIGHLY_ recommend that you change this setting
# to a nearby mirror by merging and using the 'mirrorselect' tool.
#GENTOO_MIRRORS="<your_mirror_here> http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
#
# Portage uses PORTAGE_BINHOST to specify mirrors for prebuilt-binary packages.
# The list is a single entry specifying the full address of the directory
# serving the tbz2's for your system. Running emerge with either '--getbinpkg'
# or '--getbinpkgonly' will cause portage to retrieve the metadata from all
# packages in the directory specified, and use that data to determine what will
# be downloaded and merged. '-g' or '-gK' are the recommend parameters. Please
# consult the man pages and 'emerge --help' for more information. For FTP, the
# default connection is passive -- If you require an active connection, affix
# an asterisk (*) to the end of the host:port string before the path.
#PORTAGE_BINHOST="http://grp.mirror.site/gentoo/grp/1.4/i686/athlon-xp/"
# This ftp connection is passive ftp.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site/pub/grp/i686/athlon-xp/"
# This ftp connection is active ftp.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site:21*/pub/grp/i686/athlon-xp/"
# Synchronizing Portage
# =====================
#
# Each of these settings affects how Gentoo synchronizes your Portage tree.
# Synchronization is handled by rsync and these settings allow some control
# over how it is done.
#
#
# SYNC is the server used by rsync to retrieve a localized rsync mirror
# rotation. This allows you to select servers that are geographically
# close to you, yet still distribute the load over a number of servers.
# Please do not single out specific rsync mirrors. Doing so places undue
# stress on particular mirrors. Instead you may use one of the following
# continent specific rotations:
#
# Default: "rsync://rsync.gentoo.org/gentoo-portage"
# North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage"
# South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage"
# Europe: "rsync://rsync.europe.gentoo.org/gentoo-portage"
# Asia: "rsync://rsync.asia.gentoo.org/gentoo-portage"
# Australia: "rsync://rsync.au.gentoo.org/gentoo-portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
#
# RSYNC_RETRIES sets the number of times portage will attempt to retrieve
# a current portage tree before it exits with an error. This allows
# for a more successful retrieval without user intervention most times.
#RSYNC_RETRIES="3"
#
# RSYNC_TIMEOUT sets the length of time rsync will wait before it times out
# on a connection. Most users will benefit from this setting as it will
# reduce the amount of 'dead air' they experience when they run across
# the occasional, unreachable mirror. Dialup users might want to set this
# value up around the 300 second mark.
#RSYNC_TIMEOUT=180
# Advanced Features
# =================
#
# MAKEOPTS provides extra options that may be passed to 'make' when a
# program is compiled. Presently the only use is for specifying
# the number of parallel makes (-j) to perform. The suggested number
# for parallel makes is CPUs+1.
MAKEOPTS="-j2"
#
# PORTAGE_NICENESS provides a default increment to emerge's niceness level.
# Note: This is an increment. Running emerge in a niced environment will
# reduce it further. Default is unset.
PORTAGE_NICENESS=3
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
# packages from the system after every successful merge. This is the
# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
# This does not affect the unpacked source. See 'noclean' below.
AUTOCLEAN="yes"
#
# PORTAGE_TMPFS is a location where portage may create temporary files.
# If specified, portage will use this directory whenever possible
# for all rapid operations such as lockfiles and transient data.
# It is _highly_ recommended that this be a tmpfs or ramdisk. Do not
# set this to anything that does not give a significant performance
# enhancement and proper FS compliance for locks and read/write.
# /dev/shm is a glibc mandated tmpfs, and should be a reasonable
# setting for all linux kernel+glibc based systems.
PORTAGE_TMPFS="/dev/shm"
#
# FEATURES are settings that affect the functionality of portage. Most of
# these settings are for developer use, but some are available to non-
# developers as well.
#
# 'autoaddcvs' causes portage to automatically try to add files to cvs
# that will have to be added later. Done at generation times
# and only has an effect when 'cvs' is also set.
# 'buildpkg' causes binary packages to be created of all packages that
# are being merged.
# 'ccache' enables ccache support via CC.
# 'collision-protect'
# prevents packages from overwriting files that are owned by
# another package or by no package at all.
# 'cvs' causes portage to enable all cvs features (commits, adds),
# and to apply all USE flags in SRC_URI for digests -- for
# developers only.
# 'digest' causes digests to be generated for all packages being merged.
# 'distcc' enables distcc support via CC.
# 'distlocks' enables distfiles locking using fcntl or hardlinks. This
# is enabled by default. Tools exist to help clean the locks
# after crashes: /usr/lib/portage/bin/clean_locks.
# 'fixpackages' allows portage to fix binary packages that are stored in
# PKGDIR. This can consume a lot of time. 'fixpackages' is
# also a script that can be run at any given time to force
# the same actions.
# 'gpg' enables basic verification of Manifest files using gpg.
# This features is UNDER DEVELOPMENT and reacts to features
# of strict and severe. Heavy use of gpg sigs is coming.
# 'keeptemp' prevents the clean phase from deleting the temp files ($T)
# from a merge.
# 'keepwork' prevents the clean phase from deleting the WORKDIR.
# 'maketest' causes ebuilds to perform testing phases if they are capable
# of it. Some packages support this automaticaly via makefiles.
# 'noauto' causes ebuild to perform only the action requested and
# not any other required actions like clean or unpack -- for
# debugging purposes only.
# 'noclean' prevents portage from removing the source and temporary files
# after a merge -- for debugging purposes only.
# 'nostrip' prevents the stripping of binaries.
# 'notitles' disables xterm titlebar updates (which contain status info).
# 'sandbox' enables sandboxing when running emerge and ebuild.
# 'strict' causes portage to react strongly to conditions that are
# potentially dangerous, like missing/incorrect Manifest files.
# 'userpriv' allows portage to drop root privileges while it is compiling,
# as a security measure. As a side effect this can remove
# sandbox access violations for users.
# 'usersandbox' enables sandboxing while portage is running under userpriv.
#FEATURES="sandbox buildpkg ccache distcc userpriv usersandbox notitles noclean noauto cvs keeptemp keepwork autoaddcvs"
#FEATURES="sandbox ccache distcc distlocks autoaddcvs"
#
# CCACHE_SIZE sets the space use limitations for ccache. The default size is
# 2G, and will be set if not defined otherwise and ccache is in features.
# Portage will set the default ccache dir if it is not present in the
# user's environment, for userpriv it sets: ${PORTAGE_TMPDIR}/ccache
# (/var/tmp/ccache), and for regular use the default is /root/.ccache.
# Sizes are specified with 'G' 'M' or 'K'.
# '2G' for 2 gigabytes, '2048M' for 2048 megabytes (same as 2G).
CCACHE_SIZE="512M"
#
# DISTCC_DIR sets the temporary space used by distcc.
DISTCC_DIR="${PORTAGE_TMPDIR}/.distcc"
#
# RSYNC_EXCLUDEFROM is a file that portage will pass to rsync when it updates
# the portage tree. Specific chunks of the tree may be excluded from
# consideration. This may cause dependency failures if you are not careful.
# The file format is one pattern per line, blanks and ';' or '#' lines are
# comments. See 'man rsync' for more details on the exclude-from format.
RSYNC_EXCLUDEFROM=/etc/portage/rsync_excludes
LANGUAGE=48
|
What to do? Is it a bug?
_________________
http://bots.xt.pl |
|
| Back to top |
|
 |
moocha
Watchman
Joined: 21 Oct 2003
Posts: 5722
|
|
| Back to top |
|
|
kallamej
Administrator
Joined: 27 Jun 2003
Posts: 4975
Location: Gothenburg, Sweden
|
| Posted: Sat Oct 28, 2006 10:26 am Post subject: |
|
|
Moved from Other Things Gentoo to Duplicate Threads in favour of the above mentioned topic.
_________________
Please read our FAQ Forum, it answers many of your questions.
irc: #gentoo-forums on irc.libera.chat |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Duplicate Threads
