| View previous topic :: View next topic |
| Author |
Message |
InVekz
n00b
Joined: 22 Mar 2003
Posts: 38
|
 Posted: Mon Apr 28, 2003 5:04 pm Post subject: Xine tv-out stoped working |
 |
|
After a -u world xine tv-out stoped working
Xine itself works fine put when im doing the usual 3 F clicks to get tv-out it doesnt work etc, only get normal/fullscreen
start up output:
| Code: |
This is xine (X11 gui) - a free video player v0.9.20
(c) 2000-2003 by G. Bartsch and the xine project team.
Built with xine library 1.0.0 (1-beta10)
Found xine library version: 1.0.0 (1-beta10).
XServer Vendor: Gentoo Linux (XFree86 4.3.0, revision r2). Release: 40300000,
Protocol Version: 11, Revision: 0,
Available Screen(s): 1, using 0
Depth: 24.
XShmQueryVersion: 1.1.
-[ xiTK version 0.10.2 ]-
-[ xiTK will use XShm ]-
-[ WM type: (GnomeCompliant) Enlightenment {Enlightenment} ]-
Display is not using Xinerama.
main: probing <aadxr3> video output plugin
load_plugins: failed to load video output plugin <aadxr3>
main: probing <dxr3> video output plugin
video_out_dxr3: Failed to open control device /dev/em8300-0 (No such file or directory)
load_plugins: failed to load video output plugin <dxr3>
main: probing <xv> video output plugin
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
vo_scale: invalid ratio, using 4:3
vo_scale: unknown aspect ratio (0) in stream => using 4:3
|
i use:
nvtv 0.4.0
nvtv works fine if I use it alone
Any ideas? |
|
| Back to top |
|
 |
InVekz
n00b
Joined: 22 Mar 2003
Posts: 38
|
| Posted: Thu May 01, 2003 11:09 am Post subject: |
|
|
Iv also tried to use some old versions now.
| Code: |
This is xine (X11 gui) - a free video player v0.9.13
(c) 2000-2002 by G. Bartsch and the xine project team.
Built with xine library 0.9.13 [Thu 01 May 2003 12:38:36]-[gcc version 3.2.2]-[Linux 2.4.20-gentoo-r2 i686].
Found xine library version: 0.9.13 (0.9.13).
XServer Vendor: Gentoo Linux (XFree86 4.3.0, revision r2). Release: 40300000,
Protocol Version: 11, Revision: 0,
Available Screen(s): 1, using 0
Depth: 24.
Display is not using Xinerama.
main: probing <SyncFB> video output plugin
video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb")
load_plugins: video output plugin /usr/lib/xine/plugins/xineplug_vo_out_syncfb.so: init_video_out_plugin failed.
main: probing <Xv> video output plugin
video_out_xv: using Xv port 105 from adaptor NV10 Video Overlay for hardware colorspace conversion and scaling.
video_out_xv: double buffering mode = 1
video_out_xv: port attribute XV_COLORKEY value is 66046
video_out_xv: port attribute XV_AUTOPAINT_COLORKEY value is 1
video_out_xv: port attribute XV_BRIGHTNESS value is -2
video_out_xv: port attribute XV_CONTRAST value is 4094
video_out_xv: port attribute XV_SATURATION value is 4094
video_out_xv: port attribute XV_HUE value is 0
video_out_xv: this adaptor supports the yuy2 format.
video_out_xv: this adaptor supports the yv12 format.
load_plugins: video output plugin Xv successfully loaded.
main: probing audio drivers...
main: trying to autoload 'alsa09' audio driver: audio_alsa_out : supported modes are 8bit mono stereo (4-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
load_plugins: audio output plugin alsa09 successfully loaded.
main: ...worked, using 'alsa09' audio driver.
xine: xine_init entered
Benchmarking memcpy methods (smaller is better):
glibc memcpy() : 709311406
linux kernel memcpy() : 721671175
MMX optimized memcpy() : 872332144
MMXEXT optimized memcpy() : 454291610
SSE optimized memcpy() : 461660918
xine: using MMXEXT optimized memcpy()
xine-scr_init: complete
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_file.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_dvd.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_vcd.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_cda.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_stdin_fifo.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_net.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_rtp.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_http.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_mms.so:
libxine.so.1: cannot open shared object file: No such file or directory
load_plugins: cannot open input plugin /usr/lib/xine/plugins/xineplug_inp_dvdnav.so:
libdvdread.so.2: cannot open shared object file: No such file or directory
load_plugins: no input plugins found in /usr/lib/xine/plugins! - Did you install xine correctly??
Aborted
|
however the tvout seems to work however xine crashes as it doesnt find the plugins.
I used
media-libs/xine-lib-0.9.13-r3
media-video/xine-ui-0.9.13
edit:
ok i solved it with the old version
emerge libdvdnav xine-dvdnav
makes me able to run the old xine with tv out |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
