| View previous topic :: View next topic |
| Author |
Message |
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
 Posted: Wed Jun 14, 2006 10:27 am Post subject: problemi con genkernel |
 |
|
salve a tutti.
Espongo brevemente il mio problema.
compilo un kernel e qualunque siano le opzioni che metto ad un certo punto vien fuori
questo errore me lo trovo sia con
| Code: | | linux-2.6.16-gentoo-r7 |
sia con
| Code: | | linux-2.6.16-gentoo-r9 |
questo errore riportato è fatto compilando l'R9
| Code: |
>> Compiling 2.6.16-gentoo-r94 modules...
* ERROR: Failed to compile the "modules" target...
* -- Grepping log... --
SCSI media changer support (CHR_DEV_SCH) [M/n/y/?] m
*
* Some SCSI devices (e.g. CD jukebox) support multiple LUNs
*
Probe all LUNs on each SCSI device (SCSI_MULTI_LUN) [N/y/?] n
Verbose SCSI error reporting (kernel size +=12K) (SCSI_CONSTANTS) [N/y/?] n
--
Verbose debugging output (INFINIBAND_MTHCA_DEBUG) [N/y/?] n
IP-over-InfiniBand (INFINIBAND_IPOIB) [M/n/?] m
IP-over-InfiniBand debugging (INFINIBAND_IPOIB_DEBUG) [N/y/?] n
InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [N/m/?] n
*
* EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
*
EDAC core system error reporting (EXPERIMENTAL) (EDAC) [N/m/y/?] n
--
CC mm/fadvise.o
CC kernel/power/process.o
CC mm/page_alloc.o
CC kernel/power/console.o
CC kernel/power/pm.o
kernel/power/pm.c:259: warning: `pm_register' is deprecated (declared at kernel/power/pm.c:63)
kernel/power/pm.c:260: warning: `pm_unregister' is deprecated (declared at kernel/power/pm.c:86)
kernel/power/pm.c:261: warning: `pm_unregister_all' is deprecated (declared at kernel/power/pm.c:115)
kernel/power/pm.c:262: warning: `pm_send_all' is deprecated (declared at kernel/power/pm.c:234)
--
CC drivers/char/speakup/speakup.o
CC net/ipv4/protocol.o
CC net/ipv4/ip_input.o
CC drivers/char/speakup/speakup_drvcommon.o
CC net/ipv4/ip_fragment.o
drivers/char/speakup/speakup_drvcommon.c:37: warning: 'module_name' defined but not used
--
CC drivers/scsi/sr_vendor.o
CC drivers/scsi/megaraid.o
LD drivers/scsi/aacraid/built-in.o
LD drivers/scsi/aic7xxx/built-in.o
drivers/scsi/megaraid.c: In function `issue_scb':
drivers/scsi/megaraid.c:1152: warning: passing arg 2 of `writel' makes pointer from integer without a cast
drivers/scsi/megaraid.c: In function `issue_scb_block':
drivers/scsi/megaraid.c:1215: warning: passing arg 2 of `writel' makes pointer from integer without a cast
drivers/scsi/megaraid.c:1228: warning: passing arg 2 of `writel' makes pointer from integer without a cast
drivers/scsi/megaraid.c:1230: warning: passing arg 1 of `readl' makes pointer from integer without a cast
drivers/scsi/megaraid.c: In function `megaraid_isr_memmapped':
drivers/scsi/megaraid.c:1360: warning: passing arg 1 of `readl' makes pointer from integer without a cast
drivers/scsi/megaraid.c:1367: warning: passing arg 2 of `writel' makes pointer from integer without a cast
drivers/scsi/megaraid.c:1386: warning: passing arg 2 of `writel' makes pointer from integer without a cast
drivers/scsi/megaraid.c:1390: warning: passing arg 1 of `readl' makes pointer from integer without a cast
LD drivers/scsi/lpfc/built-in.o
drivers/scsi/megaraid.c: In function `megadev_ioctl':
drivers/scsi/megaraid.c:3660: warning: ignoring return value of `copy_to_user', declared with attribute warn_unused_result
LD drivers/scsi/megaraid/built-in.o
drivers/scsi/megaraid.c: In function `mega_internal_command':
drivers/scsi/megaraid.c:4473: warning: unused variable `flags'
--
CC [M] arch/i386/kernel/msr.o
CC [M] arch/i386/kernel/cpuid.o
CC [M] arch/i386/kernel/microcode.o
CC [M] arch/i386/kernel/apm.o
arch/i386/kernel/apm.c: In function `suspend':
arch/i386/kernel/apm.c:1195: warning: `pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:31)
arch/i386/kernel/apm.c:1249: warning: `pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:31)
arch/i386/kernel/apm.c: In function `check_events':
arch/i386/kernel/apm.c:1370: warning: `pm_send_all' is deprecated (declared at include/linux/pm_legacy.h:31)
--
CC [M] drivers/net/starfire.o
CC [M] drivers/net/mii.o
CC [M] drivers/net/sundance.o
CC [M] drivers/net/sb1000.o
CC [M] drivers/net/hp100.o
drivers/net/hp100.c:373: warning: 'hp100_isa_probe' defined but not used
--
CC [M] drivers/scsi/scsi_transport_spi.o
CC [M] drivers/scsi/scsi_transport_fc.o
CC [M] drivers/scsi/scsi_transport_sas.o
CC [M] drivers/scsi/BusLogic.o
drivers/scsi/BusLogic.c: In function `BusLogic_InitializeProbeInfoListISA':
drivers/scsi/BusLogic.c:583: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:585: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:587: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:589: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:591: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:593: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c: In function `BusLogic_InitializeMultiMasterProbeInfo':
drivers/scsi/BusLogic.c:799: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:809: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:811: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:813: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:815: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c:817: warning: `check_region' is deprecated (declared at include/linux/ioport.h:124)
drivers/scsi/BusLogic.c: In function `BusLogic_init':
drivers/scsi/BusLogic.c:2300: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result
drivers/scsi/BusLogic.c: At top level:
drivers/scsi/BusLogic.c:2961: warning: 'BusLogic_AbortCommand' defined but not used
CC [M] drivers/scsi/dpt_i2o.o
CC [M] drivers/scsi/ips.o
drivers/scsi/ips.c: In function `ips_register_scsi':
drivers/scsi/ips.c:7042: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result
CC [M] drivers/scsi/fdomain.o
CC [M] drivers/scsi/qlogicfas408.o
CC [M] drivers/scsi/qlogicfc.o
CC [M] drivers/scsi/qla1280.o
CC [M] drivers/scsi/dmx3191d.o
drivers/scsi/NCR5380.c:634: warning: 'NCR5380_print_options' defined but not used
drivers/scsi/NCR5380.c:709: warning: 'NCR5380_proc_info' defined but not used
drivers/scsi/NCR5380.c:360: warning: 'phases' defined but not used
drivers/scsi/NCR5380.c:580: warning: 'NCR5380_probe_irq' defined but not used
--
CC [M] drivers/scsi/a100u2w.o
CC [M] drivers/scsi/3w-xxxx.o
CC [M] drivers/scsi/3w-9xxx.o
CC [M] drivers/scsi/nsp32.o
drivers/scsi/nsp32.c: In function `nsp32_detect':
drivers/scsi/nsp32.c:2888: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result
--
CC [M] drivers/scsi/libata-core.o
CC [M] drivers/scsi/libata-scsi.o
CC [M] drivers/scsi/ahci.o
CC [M] drivers/scsi/sata_svw.o
drivers/scsi/sata_svw.c: In function `k2_sata_tf_load':
drivers/scsi/sata_svw.c:113: warning: passing arg 2 of `writeb' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:118: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:119: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:120: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:121: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:122: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:124: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:125: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:126: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:127: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:128: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:132: warning: passing arg 2 of `writeb' makes pointer from integer without a cast
drivers/scsi/sata_svw.c: In function `k2_sata_tf_read':
drivers/scsi/sata_svw.c:144: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:145: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:146: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:147: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:148: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_svw.c:149: warning: passing arg 1 of `readw' makes pointer from integer without a cast
--
CC [M] drivers/scsi/sata_qstor.o
CC [M] drivers/scsi/sata_sil.o
CC [M] drivers/scsi/sata_via.o
CC [M] drivers/scsi/sata_vsc.o
drivers/scsi/sata_vsc.c: In function `vsc_sata_tf_load':
drivers/scsi/sata_vsc.c:146: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:147: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:148: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:149: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:150: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:152: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:153: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:154: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:155: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:156: warning: passing arg 2 of `writew' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:160: warning: passing arg 2 of `writeb' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c: In function `vsc_sata_tf_read':
drivers/scsi/sata_vsc.c:172: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:173: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:174: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:175: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:176: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:177: warning: passing arg 1 of `readw' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c: In function `vsc_sata_setup_port':
drivers/scsi/sata_vsc.c:310: warning: passing arg 2 of `writel' makes pointer from integer without a cast
drivers/scsi/sata_vsc.c:311: warning: passing arg 2 of `writel' makes pointer from integer without a cast
--
CC [M] drivers/scsi/megaraid/megaraid_sas.o
CC [M] drivers/scsi/pcmcia/aha152x_stub.o
CC [M] drivers/scsi/pcmcia/aha152x_core.o
CC [M] drivers/scsi/pcmcia/fdomain_stub.o
drivers/scsi/pcmcia/fdomain_stub.c: In function `fdomain_config':
drivers/scsi/pcmcia/fdomain_stub.c:191: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result
CC [M] drivers/scsi/pcmcia/fdomain_core.o
drivers/scsi/fdomain.c:425: warning: 'ports' defined but not used
drivers/scsi/fdomain.c:469: warning: 'signatures' defined but not used
drivers/scsi/fdomain.c:652: warning: 'fdomain_get_irq' defined but not used
CC [M] drivers/scsi/pcmcia/qlogic_stub.o
CC [M] drivers/scsi/pcmcia/nsp_cs.o
drivers/scsi/pcmcia/nsp_cs.c: In function `nsp_cs_config':
drivers/scsi/pcmcia/nsp_cs.c:1857: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result
--
CC [M] drivers/usb/net/zaurus.o
CC [M] drivers/usb/net/usbnet.o
CC [M] drivers/usb/net/zd1201.o
drivers/usb/net/zd1201.c:24:27: net/ieee80211.h: No such file or directory
drivers/usb/net/zd1201.c: In function `zd1201_usbrx':
drivers/usb/net/zd1201.c:341: error: `IEEE80211_SCTL_FRAG' undeclared (first use in this function)
drivers/usb/net/zd1201.c:341: error: (Each undeclared identifier is reported only once
drivers/usb/net/zd1201.c:341: error: for each function it appears in.)
drivers/usb/net/zd1201.c:342: error: `IEEE80211_FCTL_MOREFRAGS' undeclared (first use in this function)
drivers/usb/net/zd1201.c:352: error: `IEEE80211_DATA_LEN' undeclared (first use in this function)
drivers/usb/net/zd1201.c:358: error: `IEEE80211_SCTL_SEQ' undeclared (first use in this function)
make[3]: *** [drivers/usb/net/zd1201.o] Error 1
make[2]: *** [drivers/usb/net] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2
* Gentoo Linux Genkernel; Version 3.3.11d
* Running with options: --menuconfig all
* ERROR: Failed to compile the "modules" target...
* -- End log... --
|
simpatica cosa, vero?
la cosa interessante è che nn capisco a che si riferisca, visto che `IEEE80211_DATA_LEN' e simili: nn esistono.
A dir la verità questo problema si è riscontrato la prima volta quando ho tolto un po' di moduli facendo
| Code: | | genkernel --menuconfig all |
utilizzando l'R7.
ma sinceramente erano cose del tipo supporto per token ring o simili che in un pc portatile sfido chiunque ad averlo!
cmq io nn ce lo ho
poi ho cambiato kernel e sono passato a vedere se l'R9 andasse. alle prime 2 volte è andato, poi stop.
mah. sembrano esserci problemi con moduli dell'USB, ma io là nn c'ho messo mano. semmai ha senso che faccia riferimento all' 802.11 che è il wireless. io ho una scheda wireless ma mi funziona con i vecchi kernel. e su questi nuovi nn faccio che le stesse operazioni.
Comunque la storia nn torna se ogni volta che compilo (cambiando anche la configurazione), l'errore rimane lo stesso! 
non ha senso!!
forse c'è qualcosa che io nn comprendo...
_________________
Darkman |
|
| Back to top |
|
 |
Ic3M4n
Advocate
Joined: 02 Nov 2004
Posts: 3489
Location: Bergamo.
|
| Posted: Wed Jun 14, 2006 10:57 am Post subject: |
|
|
per vedere se l'errore è di genkernel potresti provare a crearti una conf a mano, dopotutto non è difficile ed anche se tralasci qualcosa tipo audio usb dri dovresti essere in grado di fare il boot del sistema. inoltre viene fornito un minimo di output per ogni voce del kernel tramite l'help e dovresti riuscire a capire a cosa servono le varie opzioni.
secondo me potresti fare un tentativo. |
|
| Back to top |
|
|
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Wed Jun 14, 2006 11:01 am Post subject: |
|
|
uhm...
è che nn lo ho mai fatto.
sai, sono uno degli informatici che usa + tool automatici che può. 
ok,
ci farò un tentativo.
dovrò solo capire come.... 
_________________
Darkman |
|
| Back to top |
|
|
Ic3M4n
Advocate
Joined: 02 Nov 2004
Posts: 3489
Location: Bergamo.
|
| Posted: Wed Jun 14, 2006 11:11 am Post subject: |
|
|
beh... c'è una prima volta per tutti, anche io ho utilizzato genkernel le prime volte, poi ho preferito di gran lunga la compilazione a manina e come me credo molte delle persone che bazzicano nel forum. non dimentichiamoci che genkernel utilizza una configurazione molto generica ed il termine generico fa un po' a pugni con "un sistema gentoo" 
in ogni caso per ogni necessità sai che puoi trovare qualcuno disposto a darti una mano. |
|
| Back to top |
|
|
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Wed Jun 14, 2006 3:01 pm Post subject: ok |
|
|
bene!
sono riuscito a compilare senza genkernel.
e.. a dire la verità non mi pare nemmeno difficile.
mah, chissà perchè ero tanto impaurito di nn usare genkernel.
ottimo. grazie. ora nn rimane che 1 problema. ma non è il thread giusto
thks
_________________
Darkman |
|
| Back to top |
|
|
Ic3M4n
Advocate
Joined: 02 Nov 2004
Posts: 3489
Location: Bergamo.
|
| Posted: Wed Jun 14, 2006 5:06 pm Post subject: |
|
|
il tag risolto al titolo grazie.
puoi inserirlo editando il primo post. |
|
| Back to top |
|
|
|
Forum italiano (Italian)
