Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[i810] DualHead avec une carte intel i810
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
BaNaNe
Guru
Guru


Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...

PostPosted: Sat Jun 10, 2006 8:35 am    Post subject: [i810] DualHead avec une carte intel i810 Reply with quote

Bonjour à tous!
Je suis en train d'essayer d'utiliser deux écrans sur mon portable équipé d'une carte graphique Intel intégrée :
Code:
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)


Le but étant d'avoir un bureau étendu comme sous Windows, avec comme moniteur principal le lcd du portable et comme moniteur secondaire un écran 15" qui peut afficher une image en 1024x768@85hz

J'ai vu plusieurs postes qui parlent de ma carte graphique mais je n'arrive pas à en extraire une solution.

Bon voilà où j'en suis : Quand je démarre le pc, j'ai une image sur l'écran exerne mais elle est tronquée et elle est déformée, tremble, bref, c'est pas ca.
Quand X se lance, je n'ai plus rien sur l'écran externe.
J'ai essayé le programme i855crt. Je le lance ainsi :

Code:
jf-portable ~ # i855crt on 1024x768@85

Intel 855GM CRT out driver V0.4
Copyright (C) Merello Andrea 2004

found mode 1024x768@85
Creating display mirror on pipe A
Enabling CRT and connecting to pipe A
Segmentation fault

Il fait une erreur de segmentation mais j'ai quand même une image... qui à plus l'air d'etre à 50hz qu'a 85.... ca scintille et l'image est toujours tronquée et il n'y a pas de curseurs.

J'ai bien essayé de configurer mon Xorg.conf, j'ai recompilé 'world' avec xinerama comme USE mais cela ne change rien.

Est-ce que quelqu'un aurait une solution ou une suggestion?

Je poste toujours mon xorg.conf. Je ne sais pas si le log est nécessaire? Mais si je le met, ca va prendre de la place :s

xorg.conf
Code:

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension
    Load "synaptics"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

#######
#Option  "Xinerama"  "true"
######
EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option   "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg

#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"


    Option "XkbModel"   "pc104"
    Option "XkbLayout"   "be"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"
    #Option "EmulateWheel" "on"
    #Driver   "synaptics"
    Option "Protocol"    "auto"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping"   "4 5"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"   "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate"   "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "InputDevice"
   Driver  "synaptics"
      Identifier  "TouchPad"
      Option "Device"  "/dev/input/mouse0"
      Option "Protocol" "auto-dev"
      Option "LeftEdge"      "1700"
      Option "RightEdge"     "5300"
      Option "TopEdge"       "1700"
      Option "BottomEdge"    "4200"
      Option "FingerLow" "25"
      Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
   Option "MaxTapMove" "220"
     Option "VertScrollDelta" "100"
      Option "MinSpeed" "0.09"
     Option "MaxSpeed" "0.18"
      Option "AccelFactor" "0.0015"
      Option "SHMConfig" "on"
EndSection









# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

    HorizSync   31.5 - 64.3

    VertRefresh 50-100


   Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 +HSYNC +VSYNC

EndSection

Section "Monitor"
   Identifier "Monitor_ext"
  HorizSync 31.5 - 48.5
   VertRefresh 50-70
#   Option "DPMS" "true"
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

#Section "Device"
#    Identifier   "Standard VGA"
#    VendorName   "Unknown"
#    BoardName   "Unknown"
#    Driver     "vga"
#EndSection

# Device configured by xorgconfig:

#Section "Device"
#    Identifier  "InterneSeule"
#    Driver      "i810"
#    Option "dri"
#EndSection


Section "Device"
    Identifier  "InterneDual"
    Driver      "i810"
#    Option "dri"
    Option "MonitorLayout" "CRT,LFP"
    Screen 0
EndSection

Section "Device"
    Identifier  "ExterneDual"
    Driver      "i810"
#    Option "dri"
    Option "MonitorLayout" "CRT,LFP"
    Screen 1
EndSection





# **********************************************************************
# Screen sections
# **********************************************************************

#Section "Screen"
#    Identifier  "EcranInterne"
#    Device      "InterneSeule"
#    Monitor     "My Monitor"
#    DefaultDepth 24
#    Subsection "Display"
#        Depth       8
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
#    Subsection "Display"
#        Depth       16
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
#    Subsection "Display"
#        Depth       24
#        Modes       "1280x800"
#        ViewPort    0 0
#    EndSubsection
#EndSection


Section "Screen"
    Identifier  "EcranInterne"
    Device      "InterneDual"
    Monitor     "My Monitor"
    DefaultDepth 24
#    Subsection "Display"
#        Depth       8
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
#    Subsection "Display"
#        Depth       16
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x800"
        ViewPort    0 0
    EndSubsection
EndSection


Section "Screen"
    Identifier  "EcranExterne"
    Device      "ExterneDual"
    Monitor     "Monitor_ext"
    DefaultDepth 16
#    Subsection "Display"
#        Depth       8
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
#    Subsection "Display"
#        Depth       16
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection






# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
#    Identifier  "Simple Layout"
   Identifier "DualHeadLayout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen 0 "EcranInterne"
    Screen 1 "EcranExterne" RightOf "EcranInterne"
    Option     "Xinerama" "on"
   

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "TouchPad" "AlwaysCore"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

Section "Extensions"
#   Option "Composite" "Enable"
#   Option "RENDER" "Enable"
EndSection


Voilà, en espérant que quelqu'un pourra m'aider...

Bon week-end à tous!
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Sat Jun 10, 2006 8:46 am    Post subject: Reply with quote

Ça m'intéresse aussi :)
Back to top
View user's profile Send private message
daiji
Tux's lil' helper
Tux's lil' helper


Joined: 15 Jul 2005
Posts: 101
Location: Lausanne, Suisse

PostPosted: Sat Jun 10, 2006 8:00 pm    Post subject: Reply with quote

Voila mon xorg.conf

Il marche parfaitement avec mon Dell latitude d505.
Pour switcher entre l'écran principal et secondaire j'ai une touche "fonction spéciale" sur le clavier.

Code:

Section "ServerLayout"
   Identifier     "Layout"
   Screen      0  "Screen" 0 0

   # Commenter pour passer en mode clone
   Screen 1 "Screen2" RightOf "Screen"

   InputDevice    "Keyboard" "CoreKeyboard"
   InputDevice "TouchPad" "AlwaysCore"
   InputDevice    "Mouse" "CorePointer"

    # Décommenter pour le mode clone
   #Option    "Clone" "on"
   #Option "CloneRefresh" "75"
EndSection

Section "Files"
EndSection

Section "Monitor"
   Identifier   "Monitor"
   ### Comment all HorizSync and VertSync values to use DDC:
   #HorizSync    31.5 - 57.0
   #VertRefresh  50.0 - 70.0
EndSection

Section "Monitor"
   Identifier    "Monitor2"
   HorizSync    31.5-57.0
   VertRefresh 70.0
EndSection

Section "Device"
   Identifier  "Card"
   Driver      "i810"
   Option       "NoAccel" "false"
   Option       "DRI"    "true"
   VideoRam    16384
   Option    "DevicePresence" "yes"
   Option    "MonitorLayout" "CRT,LFP"
   Screen 0
   Card        "** Intel i810 (generic)               [i810]"
EndSection

Section "Device"
   Identifier "Card2"
   Driver "i810"
   Option       "NoAccel" "false"
   Option       "DRI"    "true"
   VideoRam    16384
   Option "DevicePresence" "yes"
   Screen    1
EndSection

Section "Screen"
   Identifier "Screen"
   Device     "Card"
   Monitor    "Monitor"
   DefaultDepth     24
   Option       "DPMS"
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes    "1024x768"
   EndSubSection
EndSection

Section "Screen"
   Identifier "Screen2"
   Device    "Card2"
   Monitor "Monitor2"
   DefaultDepth 24
   Option "DPMS"
   SubSection "Display"
      Viewport 0 0
      Depth    24
      Modes    "1024x768"
   EndSubSection
EndSection

Section "DRI"
 Mode 0666
EndSection

_________________
Le problème avec le cerveau c'est que le seul outil qui permette de l'étudier et d'améliorer son fonctionnement c'est.. le cerveau lui-même..
Back to top
View user's profile Send private message
BaNaNe
Guru
Guru


Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...

PostPosted: Sun Jun 11, 2006 8:15 am    Post subject: Reply with quote

Merci pour ton Xorg.conf. Je viens d'adapter le miens en fonction du tiens mais cela ne donne rien de plus :s

J'ai regardé dans le log et je vois cette ligne :
Code:
(II) I810(0): Display plane A is now disabled and connected to Pipe A

Or, le pipe A est celui de l'écran externe, si j'ai bien compris.

As-tu compilé un driver spécial pour le noyau? Installé un paquet en plus?

J'ai mis mon xorg.conf et le log sur mon server a cette adresse (en espérant que la connection reste debout...) : Cliquer Ici

Merci!
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Sun Jun 11, 2006 8:38 am    Post subject: Reply with quote

Merci daiji, j'essairai ça un peu plus tard.
BaNaNe, normalement tu devrais avoir un switch sur le clavier ou autre pour activer les écrans. Chez moi, c'est Fn+F8.
Back to top
View user's profile Send private message
BaNaNe
Guru
Guru


Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...

PostPosted: Sun Jun 11, 2006 11:20 am    Post subject: Reply with quote

pierreg, j'ai effectivement une combinaison qui active l'écran externe sous win : Fn+F3
Mais ici, rien ne se passe.
Rien sauf ceci dans le dmesg :
Code:
video bus notify


Le noyau verrais donc qu'il se passe quelque chose... Mais le deuxième écran ne s'allume toujours pas... Y aurait-il quelque chose à configurer en plus?
Note que les seules touches de fonctions de mon claviers qui fonctionnent sont celle du la luminosité (géré par le BIOS) et celle du WiFi (j'ai installé le module acerhk, si je me souviens bien). Le problème se situerait-il ici? J'ai aussi des touches pour éteindre les écran et pour le volume...

Merci!
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO
Back to top
View user's profile Send private message
daiji
Tux's lil' helper
Tux's lil' helper


Joined: 15 Jul 2005
Posts: 101
Location: Lausanne, Suisse

PostPosted: Sun Jun 11, 2006 1:03 pm    Post subject: Reply with quote

Alors pour le switch je ne peux pas vous répondre, tout a toujours fonctionné de base, mais c'est certainement dû aux options spéciale portable Dell du noyau.

Sinon j'ai oublié de mentionner que j'avais xorg modulaire 7.0, les versions antérieures ne fonctionnaient pas pleinement en mode multi-écrans (Artefacts, écran décallé et bandes fluo).
_________________
Le problème avec le cerveau c'est que le seul outil qui permette de l'étudier et d'améliorer son fonctionnement c'est.. le cerveau lui-même..
Back to top
View user's profile Send private message
BaNaNe
Guru
Guru


Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...

PostPosted: Sun Jun 11, 2006 6:53 pm    Post subject: Reply with quote

Bon, je viens d'installer Xorg7, sans problème, j'ai toujours mon xorg qui fonctionne sur le LCD

Par contre, je n'ai toujours rien sur mon CRT externe :s

Mais il y a du nouveau : quand j'appuie sur Fn+F3 (la combinaison de touches pour changer les modes d'affichage), il se passe quelque chose : le LCD du portable s'éteind. Si je réappuie, il se rallume. Mais toujours rien sur le CRT.

J'ai jetté un coup d'oeil dans le log de xorg et toutes ces lignes se rajoutent après avoir appuyé deux fois sur Fn+F3 :
Code:
I) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) I810(0): Next ACPI _DGS [0] 0x0
(II) I810(0): Next ACPI _DGS [1] 0x2a
(II) I810(0): Next ACPI _DGS [2] 0x2a00
(II) I810(0): Next ACPI _DGS [3] 0x2a2a
(II) I810(0): Next ACPI _DGS [4] 0x2a0000
(II) I810(0): Next ACPI _DGS [5] 0x2a002a
(II) I810(0): Next ACPI _DGS [6] 0x2a2a00
(II) I810(0): Next ACPI _DGS [7] 0x2a2a2a
(II) I810(0): Next ACPI _DGS [8] 0x15
(II) I810(0): Next ACPI _DGS [9] 0x3f
(II) I810(0): Next ACPI _DGS [10] 0x2a15
(II) I810(0): Next ACPI _DGS [11] 0x2a3f
(II) I810(0): Next ACPI _DGS [12] 0x2a0015
(II) I810(0): Next ACPI _DGS [13] 0x2a003f
(II) I810(0): Next ACPI _DGS [14] 0x2a2a15
(II) I810(0): Next ACPI _DGS [15] 0x2a2a3f
(II) I810(0): Next ACPI _DGS [16] 0x1500
(II) I810(0): Next ACPI _DGS [17] 0x152a
(II) I810(0): Next ACPI _DGS [18] 0x3f00
(II) I810(0): Next ACPI _DGS [19] 0x3f2a
(II) I810(0): Next ACPI _DGS [20] 0x2a1500
(II) I810(0): Next ACPI _DGS [21] 0x2a152a
(II) I810(0): Next ACPI _DGS [22] 0x2a3f00
(II) I810(0): Next ACPI _DGS [23] 0x2a3f2a
(II) I810(0): Next ACPI _DGS [24] 0x1515
(II) I810(0): Next ACPI _DGS [25] 0x153f
(II) I810(0): Next ACPI _DGS [26] 0x3f15
(II) I810(0): Next ACPI _DGS [27] 0x3f3f
(II) I810(0): Next ACPI _DGS [28] 0x2a1515
(II) I810(0): Next ACPI _DGS [29] 0x2a153f
(II) I810(0): Next ACPI _DGS [30] 0x2a3f15
(II) I810(0): Next ACPI _DGS [31] 0x2a3f3f
(II) I810(0): Next ACPI _DGS [32] 0x150000
(II) I810(0): Next ACPI _DGS [33] 0x15002a
(II) I810(0): Next ACPI _DGS [34] 0x152a00
(II) I810(0): Next ACPI _DGS [35] 0x152a2a
(II) I810(0): Next ACPI _DGS [36] 0x3f0000
(II) I810(0): Next ACPI _DGS [37] 0x3f002a
(II) I810(0): Next ACPI _DGS [38] 0x3f2a00
(II) I810(0): Next ACPI _DGS [39] 0x3f2a2a
(II) I810(0): Next ACPI _DGS [40] 0x150015
(II) I810(0): Next ACPI _DGS [41] 0x15003f
(II) I810(0): Next ACPI _DGS [42] 0x152a15
(II) I810(0): Next ACPI _DGS [43] 0x152a3f
(II) I810(0): Next ACPI _DGS [44] 0x3f0015
(II) I810(0): Next ACPI _DGS [45] 0x3f003f
(II) I810(0): Next ACPI _DGS [46] 0x3f2a15
(II) I810(0): Next ACPI _DGS [47] 0x3f2a3f
(II) I810(0): Next ACPI _DGS [48] 0x151500
(II) I810(0): Next ACPI _DGS [49] 0x15152a
(II) I810(0): Next ACPI _DGS [50] 0x153f00
(II) I810(0): Next ACPI _DGS [51] 0x153f2a
(II) I810(0): Next ACPI _DGS [52] 0x3f1500
(II) I810(0): Next ACPI _DGS [53] 0x3f152a
(II) I810(0): Next ACPI _DGS [54] 0x3f3f00
(II) I810(0): Next ACPI _DGS [55] 0x3f3f2a
(II) I810(0): Next ACPI _DGS [56] 0x151515
(II) I810(0): Next ACPI _DGS [57] 0x15153f
(II) I810(0): Next ACPI _DGS [58] 0x153f15
(II) I810(0): Next ACPI _DGS [59] 0x153f3f
(II) I810(0): Next ACPI _DGS [60] 0x3f1515
(II) I810(0): Next ACPI _DGS [61] 0x3f153f
(II) I810(0): Next ACPI _DGS [62] 0x3f3f15
(II) I810(0): Next ACPI _DGS [63] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [64] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [65] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [66] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [67] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [68] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [69] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [70] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [71] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [72] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [73] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [74] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [75] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [76] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [77] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [78] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [79] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [80] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [81] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [82] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [83] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [84] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [85] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [86] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [87] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [88] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [89] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [90] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [91] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [92] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [93] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [94] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [95] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [96] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [97] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [98] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [99] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [100] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [101] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [102] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [103] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [104] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [105] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [106] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [107] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [108] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [109] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [110] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [111] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [112] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [113] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [114] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [115] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [116] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [117] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [118] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [119] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [120] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [121] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [122] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [123] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [124] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [125] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [126] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [127] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [128] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [129] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [130] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [131] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [132] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [133] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [134] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [135] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [136] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [137] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [138] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [139] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [140] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [141] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [142] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [143] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [144] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [145] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [146] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [147] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [148] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [149] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [150] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [151] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [152] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [153] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [154] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [155] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [156] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [157] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [158] 0x3f3f3f
(II) I810(0): Next ACPI _DGS [159] 0x3f3f3f
(II) I810(0): ACPI Toggle devices 0x0
(II) I810(0): ACPI Toggle to 0x0
(II) I810(0): Hotkey switch to 0x800.
(II) I810(0): Attachable device 0x0.
(II) I810(0): Attachable device 0x2a.
(II) I810(0): Attachable device 0x2a00.
(II) I810(0): Attachable device 0x2a2a.
(II) I810(0): Attachable device 0x2a0000.
(II) I810(0): Attachable device 0x2a002a.
(II) I810(0): Attachable device 0x2a2a00.
(II) I810(0): Attachable device 0x2a2a2a.
(II) I810(0): Attachable device 0x15.
(II) I810(0): Attachable device 0x3f.
(II) I810(0): Attachable device 0x2a15.
(II) I810(0): Attachable device 0x2a3f.
(II) I810(0): Attachable device 0x2a0015.
(II) I810(0): Attachable device 0x2a003f.
(II) I810(0): Attachable device 0x2a2a15.
(II) I810(0): Attachable device 0x2a2a3f.
(II) I810(0): Attachable device 0x1500.
(II) I810(0): Attachable device 0x152a.
(II) I810(0): Attachable device 0x3f00.
(II) I810(0): Attachable device 0x3f2a.
(II) I810(0): Attachable device 0x2a1500.
(II) I810(0): Attachable device 0x2a152a.
(II) I810(0): Attachable device 0x2a3f00.
(II) I810(0): Attachable device 0x2a3f2a.
(II) I810(0): Attachable device 0x1515.
(II) I810(0): Attachable device 0x153f.
(II) I810(0): Attachable device 0x3f15.
(II) I810(0): Attachable device 0x3f3f.
(II) I810(0): Attachable device 0x2a1515.
(II) I810(0): Attachable device 0x2a153f.
(II) I810(0): Attachable device 0x2a3f15.
(II) I810(0): Attachable device 0x2a3f3f.
(II) I810(0): Attachable device 0x150000.
(II) I810(0): Attachable device 0x15002a.
(II) I810(0): Attachable device 0x152a00.
(II) I810(0): Attachable device 0x152a2a.
(II) I810(0): Attachable device 0x3f0000.
(II) I810(0): Attachable device 0x3f002a.
(II) I810(0): Attachable device 0x3f2a00.
(II) I810(0): Attachable device 0x3f2a2a.
(II) I810(0): Attachable device 0x150015.
(II) I810(0): Attachable device 0x15003f.
(II) I810(0): Attachable device 0x152a15.
(II) I810(0): Attachable device 0x152a3f.
(II) I810(0): Attachable device 0x3f0015.
(II) I810(0): Attachable device 0x3f003f.
(II) I810(0): Attachable device 0x3f2a15.
(II) I810(0): Attachable device 0x3f2a3f.
(II) I810(0): Attachable device 0x151500.
(II) I810(0): Attachable device 0x15152a.
(II) I810(0): Attachable device 0x153f00.
(II) I810(0): Attachable device 0x153f2a.
(II) I810(0): Attachable device 0x3f1500.
(II) I810(0): Attachable device 0x3f152a.
(II) I810(0): Attachable device 0x3f3f00.
(II) I810(0): Attachable device 0x3f3f2a.
(II) I810(0): Attachable device 0x151515.
(II) I810(0): Attachable device 0x15153f.
(II) I810(0): Attachable device 0x153f15.
(II) I810(0): Attachable device 0x153f3f.
(II) I810(0): Attachable device 0x3f1515.
(II) I810(0): Attachable device 0x3f153f.
(II) I810(0): Attachable device 0x3f3f15.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Attachable device 0x3f3f3f.
(II) I810(0): Requested display devices 0x800.
(II) I810(0): Toggle (1) 0x2
(II) I810(0): Detected duplicate devices. Toggling (0x2)
(II) I810(0): Detected display change operation (0x0, 0x800, 0x2).
(II) I810(0): Clearing Clone mode
(II) I810(0): Primary pipe is now A.
(II) I810(0): Display plane A is enabled and connected to Pipe A.
(II) I810(0): Display plane B is disabled and connected to Pipe B.
(II) I810(0): Enabling plane A.
(II) I810(0): Display plane A is now enabled and connected to Pipe A.
(II) I810(0): Display plane B is now disabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 61 Mpixel/s
(WW) I810(0): Extended BIOS function 0x5f28 failed.
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) I810(0): ACPI Toggle devices 0x0
(II) I810(0): ACPI Toggle to 0x0
(II) I810(0): Hotkey switch to 0x2.
(II) I810(0): Detected last devices (2).
(II) I810(0): Requested display devices 0x2.
(II) I810(0): Detected display change operation (0x800, 0x2, 0xa00).
(II) I810(0): Clearing Clone mode
(WW) I810(0): Extended BIOS function 0x5f64 failed.
(WW) I810(0): Extended BIOS function 0x5f64 failed.
(WW) I810(0): Failed to set display devices to 0xa00.
(WW) I810(0): Enabling LVDS directly. Pipe B.
(WW) I810(0): Disabling ADPA directly.
(WW) I810(0): Writing config directly to SWF0.
(II) I810(0): Primary pipe is now B.
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 61 Mpixel/s
(WW) I810(0): Extended BIOS function 0x5f28 failed.


Voilà, je ne sais pas si on sait en retirer quelque chose...
Mais si quelqu'un à une idée, elle est la bienvenue :p

Merci @ tous
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO
Back to top
View user's profile Send private message
daiji
Tux's lil' helper
Tux's lil' helper


Joined: 15 Jul 2005
Posts: 101
Location: Lausanne, Suisse

PostPosted: Sun Jun 11, 2006 9:03 pm    Post subject: Reply with quote

Perso j'ai trois cas différents, un seulement lcd, après un appui seulement crt, un appui de plus et c'est les deux, et ça revient à la normale à l'appui suivant.
_________________
Le problème avec le cerveau c'est que le seul outil qui permette de l'étudier et d'améliorer son fonctionnement c'est.. le cerveau lui-même..
Back to top
View user's profile Send private message
BaNaNe
Guru
Guru


Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...

PostPosted: Mon Jun 12, 2006 10:51 am    Post subject: Reply with quote

J'ai surement ces 3 cas aussi mais le CRT ne s'allume jamais donc...
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum