Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
X will not start: Not Enough Ptys
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Thu May 11, 2006 1:52 pm    Post subject: X will not start: Not Enough Ptys Reply with quote

I have searched for solutions but found none. My problem is that when I type startx it seems to load but then I am left with a terminal with this error message:
Code:

Could not init font path element /usr/share/fonts/local/, removing from list!xterm: Error 32, errno 2: No such file or directory
Reason: get_pty: not enough ptys
login: Error 32, errno 2: No such file or directory
Reason: get_pty: not enough ptys

waiting for X server to shut down X connection to :0.0 broken (explicit kill or server shutdown).


Here is my Xorg.0.log:

Code:

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.15-gentoo-r5 i686 [ELF]
Current Operating System: Linux livecd 2.6.15-gentoo-r5 #1 SMP Mon Feb 13 20:23:47 UTC 2006 i686
Build Date: 08 May 2006
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 11 03:46:06 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "XpsMonitor"
(**) |   |-->Device "Xps nVidia"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
Using vt 8
(--) using VT number 8

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,01aa rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,01aa rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,01aa rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,01aa rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,01aa rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,01aa rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,01aa rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,01aa rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,01aa rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1028,01aa rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,00c9 card 1028,019c rev a2 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,165e card 1028,01aa rev 03 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0476 card 2000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 03:01:1: chip 1180,0552 card 1028,01aa rev 08 class 0c,00,10 hdr 80
(II) PCI: 03:01:2: chip 1180,0822 card 1028,01aa rev 17 class 08,05,01 hdr 80
(II) PCI: 03:03:0: chip 8086,4220 card 8086,2721 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xdd000000 - 0xdfefffff (0x2f00000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
   [0] -1   0   0x00002000 - 0x00002fff (0x1000) IX[B]
(II) Bus 3 non-prefetchable memory range:
   [0] -1   0   0xdcf00000 - 0xdcffffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
   [0] -1   0   0x50000000 - 0x51ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
   [0] -1   0   0x00002000 - 0x000020ff (0x100) IX[B]
   [1] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
(II) Bus 4 prefetchable memory range:
   [0] -1   0   0x50000000 - 0x51ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x00c9) rev 162, Mem @ 0xdd000000/24, 0xc0000000/28, 0xde000000/24, BIOS @ 0xdfe00000/17
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
   [0] -1   0   0xdcfef000 - 0xdcfeffff (0x1000) MX[B]
   [1] -1   0   0xdcfee700 - 0xdcfee7ff (0x100) MX[B]
   [2] -1   0   0xdcfee800 - 0xdcfeefff (0x800) MX[B]
   [3] -1   0   0xdcff0000 - 0xdcffffff (0x10000) MX[B]
   [4] -1   0   0xdffffd00 - 0xdffffdff (0x100) MX[B]
   [5] -1   0   0xdffffe00 - 0xdfffffff (0x200) MX[B]
   [6] -1   0   0xffa80800 - 0xffa80bff (0x400) MX[B]
   [7] -1   0   0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
   [8] -1   0   0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
   [9] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
   [10] -1   0   0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
   [11] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [12] -1   0   0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
   [13] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [14] -1   0   0x00000170 - 0x00000170 (0x1) IX[B]
   [15] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [16] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [17] -1   0   0x0000ec80 - 0x0000ecff (0x80) IX[B]
   [18] -1   0   0x0000ee00 - 0x0000eeff (0x100) IX[B]
   [19] -1   0   0x0000ec40 - 0x0000ec7f (0x40) IX[B]
   [20] -1   0   0x0000ed00 - 0x0000edff (0x100) IX[B]
   [21] -1   0   0x0000bf20 - 0x0000bf3f (0x20) IX[B]
   [22] -1   0   0x0000bf40 - 0x0000bf5f (0x20) IX[B]
   [23] -1   0   0x0000bf60 - 0x0000bf7f (0x20) IX[B]
   [24] -1   0   0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xdcfef000 - 0xdcfeffff (0x1000) MX[B]
   [1] -1   0   0xdcfee700 - 0xdcfee7ff (0x100) MX[B]
   [2] -1   0   0xdcfee800 - 0xdcfeefff (0x800) MX[B]
   [3] -1   0   0xdcff0000 - 0xdcffffff (0x10000) MX[B]
   [4] -1   0   0xdffffd00 - 0xdffffdff (0x100) MX[B]
   [5] -1   0   0xdffffe00 - 0xdfffffff (0x200) MX[B]
   [6] -1   0   0xffa80800 - 0xffa80bff (0x400) MX[B]
   [7] -1   0   0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
   [8] -1   0   0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
   [9] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
   [10] -1   0   0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
   [11] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [12] -1   0   0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
   [13] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [14] -1   0   0x00000170 - 0x00000170 (0x1) IX[B]
   [15] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [16] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [17] -1   0   0x0000ec80 - 0x0000ecff (0x80) IX[B]
   [18] -1   0   0x0000ee00 - 0x0000eeff (0x100) IX[B]
   [19] -1   0   0x0000ec40 - 0x0000ec7f (0x40) IX[B]
   [20] -1   0   0x0000ed00 - 0x0000edff (0x100) IX[B]
   [21] -1   0   0x0000bf20 - 0x0000bf3f (0x20) IX[B]
   [22] -1   0   0x0000bf40 - 0x0000bf5f (0x20) IX[B]
   [23] -1   0   0x0000bf60 - 0x0000bf7f (0x20) IX[B]
   [24] -1   0   0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xdcfef000 - 0xdcfeffff (0x1000) MX[B]
   [6] -1   0   0xdcfee700 - 0xdcfee7ff (0x100) MX[B]
   [7] -1   0   0xdcfee800 - 0xdcfeefff (0x800) MX[B]
   [8] -1   0   0xdcff0000 - 0xdcffffff (0x10000) MX[B]
   [9] -1   0   0xdffffd00 - 0xdffffdff (0x100) MX[B]
   [10] -1   0   0xdffffe00 - 0xdfffffff (0x200) MX[B]
   [11] -1   0   0xffa80800 - 0xffa80bff (0x400) MX[B]
   [12] -1   0   0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
   [13] -1   0   0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
   [14] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
   [15] -1   0   0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [19] -1   0   0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
   [20] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [21] -1   0   0x00000170 - 0x00000170 (0x1) IX[B]
   [22] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [23] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [24] -1   0   0x0000ec80 - 0x0000ecff (0x80) IX[B]
   [25] -1   0   0x0000ee00 - 0x0000eeff (0x100) IX[B]
   [26] -1   0   0x0000ec40 - 0x0000ec7f (0x40) IX[B]
   [27] -1   0   0x0000ed00 - 0x0000edff (0x100) IX[B]
   [28] -1   0   0x0000bf20 - 0x0000bf3f (0x20) IX[B]
   [29] -1   0   0x0000bf40 - 0x0000bf5f (0x20) IX[B]
   [30] -1   0   0x0000bf60 - 0x0000bf7f (0x20) IX[B]
   [31] -1   0   0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 6.8.2, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nv"
(II) Loading /usr/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
   Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
   Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
   GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
   GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
   Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
   GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
   GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
   GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
   GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
   GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
   GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
   Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
   GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
   GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
   0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
   Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
   GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
   Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
   GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
   GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
   0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
   Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
   GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
   GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
   GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
   Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
   GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
   GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
   GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
   GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
   GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
   Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
   GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
   Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
   0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
   0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
   GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
   0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
   0x0211, 0x021D, 0x021E
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset 0x00C9 found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xdcfef000 - 0xdcfeffff (0x1000) MX[B]
   [6] -1   0   0xdcfee700 - 0xdcfee7ff (0x100) MX[B]
   [7] -1   0   0xdcfee800 - 0xdcfeefff (0x800) MX[B]
   [8] -1   0   0xdcff0000 - 0xdcffffff (0x10000) MX[B]
   [9] -1   0   0xdffffd00 - 0xdffffdff (0x100) MX[B]
   [10] -1   0   0xdffffe00 - 0xdfffffff (0x200) MX[B]
   [11] -1   0   0xffa80800 - 0xffa80bff (0x400) MX[B]
   [12] -1   0   0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
   [13] -1   0   0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
   [14] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
   [15] -1   0   0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [19] -1   0   0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
   [20] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [21] -1   0   0x00000170 - 0x00000170 (0x1) IX[B]
   [22] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [23] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [24] -1   0   0x0000ec80 - 0x0000ecff (0x80) IX[B]
   [25] -1   0   0x0000ee00 - 0x0000eeff (0x100) IX[B]
   [26] -1   0   0x0000ec40 - 0x0000ec7f (0x40) IX[B]
   [27] -1   0   0x0000ed00 - 0x0000edff (0x100) IX[B]
   [28] -1   0   0x0000bf20 - 0x0000bf3f (0x20) IX[B]
   [29] -1   0   0x0000bf40 - 0x0000bf5f (0x20) IX[B]
   [30] -1   0   0x0000bf60 - 0x0000bf7f (0x20) IX[B]
   [31] -1   0   0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) resource ranges after probing:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xdcfef000 - 0xdcfeffff (0x1000) MX[B]
   [6] -1   0   0xdcfee700 - 0xdcfee7ff (0x100) MX[B]
   [7] -1   0   0xdcfee800 - 0xdcfeefff (0x800) MX[B]
   [8] -1   0   0xdcff0000 - 0xdcffffff (0x10000) MX[B]
   [9] -1   0   0xdffffd00 - 0xdffffdff (0x100) MX[B]
   [10] -1   0   0xdffffe00 - 0xdfffffff (0x200) MX[B]
   [11] -1   0   0xffa80800 - 0xffa80bff (0x400) MX[B]
   [12] -1   0   0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
   [13] -1   0   0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
   [14] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
   [15] -1   0   0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
   [16] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [17] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [18] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [19] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [20] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [21] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [22] -1   0   0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
   [23] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [24] -1   0   0x00000170 - 0x00000170 (0x1) IX[B]
   [25] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [26] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [27] -1   0   0x0000ec80 - 0x0000ecff (0x80) IX[B]
   [28] -1   0   0x0000ee00 - 0x0000eeff (0x100) IX[B]
   [29] -1   0   0x0000ec40 - 0x0000ec7f (0x40) IX[B]
   [30] -1   0   0x0000ed00 - 0x0000edff (0x100) IX[B]
   [31] -1   0   0x0000bf20 - 0x0000bf3f (0x20) IX[B]
   [32] -1   0   0x0000bf40 - 0x0000bf5f (0x20) IX[B]
   [33] -1   0   0x0000bf60 - 0x0000bf7f (0x20) IX[B]
   [34] -1   0   0x0000bf80 - 0x0000bf9f (0x20) IX[B]
   [35] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [36] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(WW) NV(0): Bad V_BIOS checksum
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "0x00C9"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xC0000000
(--) NV(0): MMIO registers at 0xDD000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...found one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(--) NV(0): CRTC 0 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 0
(--) NV(0): Panel size is 1920 x 1200
(--) NV(0): VideoRAM: 262144 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): XpsMonitor: Using hsync range of 31.50-64.30 kHz
(II) NV(0): XpsMonitor: Using vrefresh range of 50.00-90.00 Hz
(II) NV(0): Clock range:  12.00 to 400.00 MHz
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1920 x 1200.  Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using mode "1800x1400" (no mode of this name)
(II) NV(0): Not using mode "1600x1200" (no mode of this name)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) NV(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) NV(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) NV(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(==) NV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xde000000 - 0xdeffffff (0x1000000) MX[B]
   [1] 0   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B]
   [2] 0   0   0xdd000000 - 0xddffffff (0x1000000) MX[B]
   [3] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [4] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xdcfef000 - 0xdcfeffff (0x1000) MX[B]
   [9] -1   0   0xdcfee700 - 0xdcfee7ff (0x100) MX[B]
   [10] -1   0   0xdcfee800 - 0xdcfeefff (0x800) MX[B]
   [11] -1   0   0xdcff0000 - 0xdcffffff (0x10000) MX[B]
   [12] -1   0   0xdffffd00 - 0xdffffdff (0x100) MX[B]
   [13] -1   0   0xdffffe00 - 0xdfffffff (0x200) MX[B]
   [14] -1   0   0xffa80800 - 0xffa80bff (0x400) MX[B]
   [15] -1   0   0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
   [16] -1   0   0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
   [17] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
   [18] -1   0   0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
   [19] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
   [20] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
   [21] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
   [22] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [23] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [24] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [25] -1   0   0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
   [26] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [27] -1   0   0x00000170 - 0x00000170 (0x1) IX[B]
   [28] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [29] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [30] -1   0   0x0000ec80 - 0x0000ecff (0x80) IX[B]
   [31] -1   0   0x0000ee00 - 0x0000eeff (0x100) IX[B]
   [32] -1   0   0x0000ec40 - 0x0000ec7f (0x40) IX[B]
   [33] -1   0   0x0000ed00 - 0x0000edff (0x100) IX[B]
   [34] -1   0   0x0000bf20 - 0x0000bf3f (0x20) IX[B]
   [35] -1   0   0x0000bf40 - 0x0000bf5f (0x20) IX[B]
   [36] -1   0   0x0000bf60 - 0x0000bf7f (0x20) IX[B]
   [37] -1   0   0x0000bf80 - 0x0000bf9f (0x20) IX[B]
   [38] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [39] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xc0000000,0x10000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Thu May 11, 2006 1:54 pm    Post subject: Reply with quote

Here is my xorg.conf:

Code:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option   "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"   "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate"   "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "XpsMonitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 64.3

#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier   "Standard VGA"
    VendorName   "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset   "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks   25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "Xps nVidia"
    Driver      "nv"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "Xps nVidia"
    Monitor     "XpsMonitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1800x1400" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1800x1400" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1800x1400" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Thu May 11, 2006 7:12 pm    Post subject: Reply with quote

Anyone? Please help.
Back to top
View user's profile Send private message
sybille
Tux's lil' helper
Tux's lil' helper


Joined: 15 Apr 2005
Posts: 111
Location: France

PostPosted: Thu May 11, 2006 7:16 pm    Post subject: Reply with quote

Are you using a custom kernel, one that you configured and compiled yourself?
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Thu May 11, 2006 8:45 pm    Post subject: Reply with quote

Yes.
Back to top
View user's profile Send private message
sybille
Tux's lil' helper
Tux's lil' helper


Joined: 15 Apr 2005
Posts: 111
Location: France

PostPosted: Thu May 11, 2006 9:38 pm    Post subject: Reply with quote

I asked because I remembered a setting in the kernel for ptys that I thought you might need to enable, but when I just looked up the setting I found that in fact it has to do with serial drivers. I doubt that's what's needed here.

Sorry. That was pretty much my one idea, and I don't think it's much help to you. :cry:
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Thu May 11, 2006 10:00 pm    Post subject: Reply with quote

Thanks anyway. Still workking on both X-win/GNOME and my network.
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Fri May 12, 2006 8:39 pm    Post subject: Reply with quote

I don't like to bump posts but my problem is still unresloved, sorry.

Either way I have made no progress, still unable to get startx to work.
Back to top
View user's profile Send private message
01mf02
Veteran
Veteran


Joined: 21 Nov 2004
Posts: 1070
Location: Innsbruck, Austria

PostPosted: Fri May 12, 2006 8:50 pm    Post subject: Reply with quote

It could be an xterm problem - I googled for this and it always seemed to be an error caused by xterm.

You may notice your error message:
Code:

xterm: Error 32, errno 2: No such file or directory
Reason: get_pty: not enough ptys
login: Error 32, errno 2: No such file or directory
Reason: get_pty: not enough ptys


It's something related to things like udev, /etc/fstab ... just to point you to the right direction, please google yourself.
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Fri May 12, 2006 8:58 pm    Post subject: Reply with quote

Thanks. Yes, that's the message exactly. Googling it now.
Back to top
View user's profile Send private message
dylnuge
Tux's lil' helper
Tux's lil' helper


Joined: 05 May 2006
Posts: 106

PostPosted: Fri May 12, 2006 9:09 pm    Post subject: Reply with quote

Okay, it seems I need to have devpty mounted to /dev/pty.

Is this line in fstab correct for mounting as such:

Code:
devpts                  /dev/pts        auto            defaults        0 0
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1319
Location: indiana

PostPosted: Mon Aug 21, 2006 5:00 pm    Post subject: Reply with quote

had the same error, i just did enable following options in kernel config /usr/src/linux/.config and compiled the kernel again, rebooted and voila ... ;)
Code:
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y


the error has nothing to do with settings in FSTAB :roll: :!:
_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
przeuj
Tux's lil' helper
Tux's lil' helper


Joined: 11 May 2004
Posts: 94
Location: Krakow

PostPosted: Tue Sep 12, 2006 12:36 am    Post subject: Reply with quote

I think you should not enable legacy unless there is some old piece of software that requires this. It has drawbacks and poses security risk (as stated in kernel help)

Bartek
_________________
[img]http://www.openwengo.org/static/eng_eng/images/banners/wengophone.png[/img]
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1319
Location: indiana

PostPosted: Tue Sep 12, 2006 5:24 am    Post subject: Reply with quote

przeuj wrote:
I think you should not enable legacy unless there is some old piece of software that requires this. It has drawbacks and poses security risk (as stated in kernel help)

Bartek


nice to know, in the afternoon i am going to fix it , thanks
_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
KaZeR
Apprentice
Apprentice


Joined: 04 Feb 2004
Posts: 270
Location: Au fond, à droite.

PostPosted: Wed Jan 23, 2013 8:01 am    Post subject: Reply with quote

Thanks, you saved my day.
_________________
Foo.
Back to top
View user's profile Send private message
wcg
Guru
Guru


Joined: 06 Jan 2009
Posts: 588

PostPosted: Sat Jan 26, 2013 3:19 pm    Post subject: Reply with quote

Quote:
Is this line in fstab correct for mounting as such:


I have this line in /etc/fstab for mounting devpts:
Code:

devpts /dev/pts devpts noatime,nodiratime,gid=5,mode=600 0 0


The nodiratime mount option may not be needed with noatime.
(I did not know one way or the other, but I could see no need for
atime updates on the devpts pseudo filesystem, so I added it.)
"man mount" and search for "devpts".

The explanation of the "newinstance" mount option in that devpts
section in the mount man page notes that the kernel's
CONFIG_DEVPTS_MULTIPLE_INSTANCES must be enabled to use it.

The fstab man page explains the different fields in /etc/fstab entries,
but the 4th field contains mount options that are explained in the mount
man page.

There are sometimes man pages for traditional configuration files
in /etc with the same name as that config file (instead of having to
dig through the documentation of some program or spend hours
searching the www for the information). fstab and inittab are such files.
_________________
TIA
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum