| View previous topic :: View next topic |
| Author |
Message |
PsychowanKenobi
n00b
Joined: 09 Nov 2005
Posts: 7
Location: Valence, France
|
 Posted: Wed Apr 12, 2006 1:45 pm Post subject: ATI drivers on kernel 2.6.15-r1 |
 |
|
Hi,
I know there are already several threads and howtos about ATI drivers but no one did issue my problem  . I don't know what is exactly happening, I used to have ati drivers working on the same kernel but know I can't figure out what's happening.
I already have a kernel with DRM and DRI disabled, AGPGART and nvidia AGP as modules and MTRR enabled. Here is my xorg.conf file :
| xorg.conf wrote: |
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
[...]
# **********************************************************************
# DRI Section
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
[...]
# **********************************************************************
#
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# === ATI device section ===
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
### EOF ###
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
[...]
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Fujitsu"
HorizSync 31.5 - 68.7
VertRefresh 60.0 - 75.0
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
[...]
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4150
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "Single"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 32
# Modes "1152x864" "1024x768" "800x600" "640x480"
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
Mode 0666
EndSection
|
startx doesn't complain about anything, according to him direct rendering is enabled :
| Xorg.0.log wrote: |
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.15-gentoo-r1version2.6.15-r1 i686 [ELF]
Current Operating System: Linux GentooBureau 2.6.15-gentoo-r1 #9 PREEMPT Wed Apr 12 14:43:10 Local time zone must be set--see i686
Build Date: 09 April 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 12 15:29:16 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01ea card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:08:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:00:0: chip 1002,4150 card 148c,2064 rev 00 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,4170 card 148c,2065 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xdfffffff (0x20000000) MX[B]
(--) PCI:*(2:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xc0000000/28, 0xe5000000/16, I/O @ 0xd000/8
(--) PCI: (2:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0, Mem @ 0xd0000000/28, 0xe5010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe6001000 - 0xe6001fff (0x1000) MX[B]
[1] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[2] -1 0 0xe6004000 - 0xe6004fff (0x1000) MX[B]
[3] -1 0 0xe6003000 - 0xe6003fff (0x1000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[8] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[9] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[10] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe6001000 - 0xe6001fff (0x1000) MX[B]
[1] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[2] -1 0 0xe6004000 - 0xe6004fff (0x1000) MX[B]
[3] -1 0 0xe6003000 - 0xe6003fff (0x1000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[8] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[9] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[10] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6001000 - 0xe6001fff (0x1000) MX[B]
[6] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[7] -1 0 0xe6004000 - 0xe6004fff (0x1000) MX[B]
[8] -1 0 0xe6003000 - 0xe6003fff (0x1000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.23.7
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
[...]
(II) Primary Device is: PCI 02:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.23.7
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.23g1
(II) ATI Proprietary Linux Driver Build Date: Mar 6 2006 17:25:03
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.23.1-driver-lnx-250560
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset RADEON 9600 (RV350 4150) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6001000 - 0xe6001fff (0x1000) MX[B]
[6] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[7] -1 0 0xe6004000 - 0xe6004fff (0x1000) MX[B]
[8] -1 0 0xe6003000 - 0xe6003fff (0x1000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x821a388
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6001000 - 0xe6001fff (0x1000) MX[B]
[6] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[7] -1 0 0xe6004000 - 0xe6004fff (0x1000) MX[B]
[8] -1 0 0xe6003000 - 0xe6003fff (0x1000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[22] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 2 card 0 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x06419064"
(**) fglrx(0): Option "GammaCorrectionII" "0x06419064"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "Single"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(**) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9600 (RV350 4150)" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x148c, PciSubDevice = 0x2064)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xe5000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9600 PRO
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/modules/linux/libdrm.a
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.23.7
ABI class: X.Org Server Extension, version 0.2
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: FUJ Model: 772 Serial#: 16843009
(II) fglrx(0): Year: 1999 Week: 18
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
(II) fglrx(0): Gamma: 1.35
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.609 redY: 0.342 greenX: 0.298 greenY: 0.588
(II) fglrx(0): blueX: 0.150 blueY: 0.063 whiteX: 0.280 whiteY: 0.311
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993
(II) fglrx(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 110.2 MHz Image Size: 306 x 230 mm
(II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1508 h_blank_end 1728 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1026 v_sync_end 1029 v_blanking: 1067 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) fglrx(0): Monitor name: FUJITSU 772
(II) fglrx(0): Serial No: TECOC0775794
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 1
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 398/203MHz @ 50Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 27 modes found for primary display.
(--) fglrx(0): Virtual size is 1920x1080 (pitch 1920)
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 +hsync
[...]
(--) fglrx(0): Display dimensions: (310, 230) mm
(--) fglrx(0): DPI set to (157, 119)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/modules/linux/libfglrxdrm.a
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x00000726
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe6001000 - 0xe6001fff (0x1000) MX[B]
[8] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[9] -1 0 0xe6004000 - 0xe6004fff (0x1000) MX[B]
[10] -1 0 0xe6003000 - 0xe6003fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[25] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area: 0xc09ea000 (size=0x07616000)
(II) fglrx(0): UMM area: 0xc09ea000 (size=0x07616000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe085a000
(II) fglrx(0): [drm] mapped SAREA 0xe085a000 to 0xb7a32000
(II) fglrx(0): [drm] framebuffer handle = 0xc0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.23.7
(II) fglrx(0): Date: Mar 6 2006
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.15-gentoo-r1
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xe5000000
(II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x01e0
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe0c81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x009ea000
(II) fglrx(0): FBMM initialized for area (0,0)-(1920,1353)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1080) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 1080)
(II) fglrx(0): Largest offscreen area available: 1920 x 265
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Interrupt handler installed at IRQ 17.
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/psaux"
[...]
|
Still I don't get any acceleration :
| glxinfo wrote: |
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
|
All modules are loaded properly :
| lsmod wrote: |
Module Size Used by
usbcore 117700 1
fglrx 453708 7
nvidia_agp 5980 1
agpgart 29128 2 fglrx,nvidia_agp
nvnet 69028 0
nvsound 1540856 0
|
and dmesg doesn't say anything special :
| dmesg wrote: |
usbcore: registered new driver usbfs
usbcore: registered new driver hub
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] free AGP = 54800384
[fglrx] max AGP = 54800384
[fglrx] free LFB = 107171840
[fglrx] max LFB = 107171840
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 16384
|
I've tried different configurations of "UseInternalAGP" and "MTRR" in xorg.conf, all I get is a warning when "UseInternalAGP" is on. I've also tried with the ati-drivers ebuild (8.21.7-r1) and know I am running the ones from the ati website (8.23.7) and it's still not working.
I'm desperate, I'm stuck with this since this morning and I can't think about anything more to do to try to make the 3D acceleration work. Oh and my graphics card is a Radeon 9600 pro.
Edit : I forgot to mention that when I use xdm, loging out completely freezes everything (i'm not even able to ctrl+fx) and when not using xdm, dmesg used to complain about mtrr (i've checked just know and it doesn't do that anymore .. maybe because i've just disabled xdm without launching "startx" from the console").
If it's a help to someone i've compiled both the kernel and the drivers with gcc 3.4.5. |
|
| Back to top |
|
 |
loki99
Advocate
Joined: 10 Oct 2003
Posts: 2056
Location: Vienna, €urope
|
| Posted: Wed Apr 12, 2006 2:29 pm Post subject: |
|
|
I had the same problem and downgrading the kernel to 2.6.14 solved it for me.  |
|
| Back to top |
|
|
PsychowanKenobi
n00b
Joined: 09 Nov 2005
Posts: 7
Location: Valence, France
|
| Posted: Wed Apr 12, 2006 6:14 pm Post subject: |
|
|
| Erf .. Ok thanks for the tip, i'll do that then. However I tried to "emerge -s ">gentoo-sources-2.6.15"" but it doesn't find anything. How can you search a package with a version ? Otherwise I don't know how to "downgrade" my kernel |
|
| Back to top |
|
|
loki99
Advocate
Joined: 10 Oct 2003
Posts: 2056
Location: Vienna, €urope
|
|
| Back to top |
|
|
PsychowanKenobi
n00b
Joined: 09 Nov 2005
Posts: 7
Location: Valence, France
|
| Posted: Thu Apr 13, 2006 10:50 am Post subject: |
|
|
| I installed the 2.6.14-r7 kernel but I still got the same problem (and I didn't forget to recompile ati drivers on the 2.6.14 kernel). Which version of the ati driver are you using ? |
|
| Back to top |
|
|
loki99
Advocate
Joined: 10 Oct 2003
Posts: 2056
Location: Vienna, €urope
|
| Posted: Thu Apr 13, 2006 11:05 am Post subject: |
|
|
I'm using x11-drivers/ati-drivers-8.23.7. Sorry it didn't work for you.
Maybe looking at this monster or reposting your probs over there might help.
Edit: Perhaps you would even like to ask a mod to move this whole thread to the big xorg thread. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
