| View previous topic :: View next topic |
| Author |
Message |
dziadu
Guru
Joined: 04 May 2006
Posts: 423
Location: Kraków/Darmstadt/Munich
|
 Posted: Sun Aug 12, 2007 6:51 pm Post subject: |
 |
|
Zrób lekkie zmiany w configu:
| Quote: | config_ppp0=( "ppp" )
link_ppp0=( "/dev/null" )
plugins_ppp0=( "pppoa 0.35" )
pppd_ppp0=( "updetach noauth debug defaultroute noaccomp nobsdcomp noccp nodeflate nopcomp novj novjccomp child-timeout 60" )
|
|
|
| Back to top |
|
 |
rastman
Apprentice
Joined: 22 Jan 2007
Posts: 210
|
| Posted: Mon Feb 18, 2008 1:14 pm Post subject: |
|
|
zastanawiaja mnie te wyniki dmesg:
| Code: | usb 4-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
usb 4-1: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
usb 4-1: [Ueagle-atm] use deprecated cmvs version, please update your firmware
usb 4-1: [ueagle-atm] modem started, waiting synchronization...
usb 4-1: [ueagle-atm] modem operational
|
oczywiscie internet dziala poprawnie, jednak nic o nowszej wersji firmware mi nie wiadomo. hm? |
|
| Back to top |
|
|
Paczesiowa
Guru
Joined: 06 Mar 2006
Posts: 593
Location: Oborniki Śląskie, Poland
|
| Posted: Sun Jun 29, 2008 12:35 am Post subject: |
|
|
wlasnie mnie niechcacy naszlo na update baselayout na serverze, milion problemow, downgrade wprowadza jeszcze wieksza sieczke a najgorszy problem to to ze neo przestalo dzialac przez initowe skrypty.
mialem w /etc/conf.d/net takie cos
| Code: | config_ppp0=( "ppp" )
link_ppp0="/dev/null"
plugins_ppp0=( "pppoa 0.35" )
username_ppp0='user@neostrada.pl'
password_ppp0='alamakota'
pppd_ppp0=( lock defaultroute noipdefault noauth holdoff 4 maxfail 25 persist asyncmap 0 lcp-echo-interval 2 lcp-echo-failure 7 ) |
dzialalo bardzo pieknie a teraz przestalo. pppd w logach narzeka na timeout z jakimis LCP (krotko mowiac zero konstruktywnego info) raz na kilkanascie prob narzeka na jakies problemy z dostepem do chap-secrets (po jaka cholere jak wszystko jest w /etc/conf.d/net). jak zatrzymam net.ppp0 i dam pppd call neostrada (cfg stad: http://www.linux.rk.edu.pl/w/p/neostrada-sagem-fast-800/) to wszystko ladnie smiga.
initowy skrypt jest mi o tyle potrzebny ze z nowym baselayout kazda inna usluga postanowila zalezec na neostradzie (w koncu po co komu uslugi do accesspointa i dhcpd jak sie nie ma niezbednej do tego neostrady) |
|
| Back to top |
|
|
mentorsct
Apprentice
Joined: 19 Feb 2008
Posts: 260
Location: Mława
|
| Posted: Sun Jun 29, 2008 7:05 am Post subject: |
|
|
Witam, ja mam najnowszy baselayout i modem sagem fast 800. To internetu używam tego skryptu:
| Code: | config_ppp0=( ppp ) # Runs /lib/rcscripts/net/pppd.sh
link_ppp0='/dev/null' # Not required by PPPoA links, but must be specified
plugins_ppp0=( 'pppoa 0.35' ) # Dla Neostrady VPI=0, VCI=35
pppd_ppp0=( usepeerdns updetach noauth debug defaultroute noaccomp nobsdcomp noccp
nodeflate nopcomp novj novjccomp child-timeout 60 )
username_ppp0='Login'
password_ppp0='Password'
# If the kernel modules are not built-in, then they must be loaded
# before starting the PPP daemon:
function preup() {
if [[ "$1" = "ppp0" ]] ; then
modprobe -q ueagle-atm
return 0
fi
}
|
Do tego mam przekompilowane:
-linux-atm
-ueagle-atm
-ppp
-dodaną flage w USE="atm"
I net działa bardzo dobrze, tylko ostatnio wyszło nowe ppp-2.4.4.-r16 które niestety popsuło net bo nie chciał działać i trzeba było wrócić do ppp-2.4.4-r15. A net uruchamiany mam standardowo poprzez
| Code: | | /etc/init.d/net.ppp0 start |
Ale dodałem go deamona. Pozdro. |
|
| Back to top |
|
|
largo3
Tux's lil' helper
Joined: 17 Apr 2007
Posts: 130
Location: Poland
|
| Posted: Sun Jun 29, 2008 8:51 am Post subject: |
|
|
@mentorsct: w 2.4.4-r17 już wszystko działa. 
Pozdrawiam.
_________________
We are making a new world - free world.
| XianN wrote: | | Pamietaj, ze Gentoo to dobry, stabilny, szybki i b. fajny system, ktory trzeba pielegnowac, piescic i dobrze karmic;) W przeciwnym razie odgryzie Ci noge i pojdzie w swoja strone... |
|
|
| Back to top |
|
|
Dew
n00b
Joined: 11 Mar 2007
Posts: 50
Location: Dornbirn, Austria (Europe)
|
| Posted: Sun Jun 29, 2008 10:18 am Post subject: |
|
|
Sorry za durne pytanie, ale co ja mam zrobić z tymi skryptami startowymi? Nikt sie nie pokusił o dokładne i proste wyjasnienie...
_________________
CPU: Intel Core2 Quad 6600; MB: MSI P35 Neo2-FIR; RAM: 4Gb DDR2 667; GPU: Gigabyte GeForce 6600GT; Snd: Sound Blaster Live! 5.1; Sys: Winshit XP, Gentoo x86 |
|
| Back to top |
|
|
largo3
Tux's lil' helper
Joined: 17 Apr 2007
Posts: 130
Location: Poland
|
| Posted: Sun Jun 29, 2008 10:34 am Post subject: |
|
|
| AKryl wrote: | | Sorry za durne pytanie, ale co ja mam zrobić z tymi skryptami startowymi? Nikt sie nie pokusił o dokładne i proste wyjasnienie... |
Na pewno?
_________________
We are making a new world - free world.
| XianN wrote: | | Pamietaj, ze Gentoo to dobry, stabilny, szybki i b. fajny system, ktory trzeba pielegnowac, piescic i dobrze karmic;) W przeciwnym razie odgryzie Ci noge i pojdzie w swoja strone... |
|
|
| Back to top |
|
|
Paczesiowa
Guru
Joined: 06 Mar 2006
Posts: 593
Location: Oborniki Śląskie, Poland
|
| Posted: Sun Jun 29, 2008 2:32 pm Post subject: |
|
|
| dobra, pomoglo przekompilowanie linux-atm ueagle-atm i ppp. wielkie dzieki za naprowadzenie. |
|
| Back to top |
|
|
mentorsct
Apprentice
Joined: 19 Feb 2008
Posts: 260
Location: Mława
|
| Posted: Sun Jun 29, 2008 7:02 pm Post subject: |
|
|
Nie ma za co  sam wiem jak sie wkurzałem jak mnie to nie działało. pozdro.
largo3 - faktycznie jest nowe ppp, nawet nie zauważyłem |
|
| Back to top |
|
|
Paczesiowa
Guru
Joined: 06 Mar 2006
Posts: 593
Location: Oborniki Śląskie, Poland
|
| Posted: Sun Feb 08, 2009 7:13 pm Post subject: |
|
|
tak z czystej ciekawosci, macie jakies problemy z awaryjnoscia sagema? generalnie to dziala ale mam takie 2 problemy:
problem 1:
kilka razy w ciagu dnia mi sie resetuje cholerstwo, oto wyciag z logow:
| Code: | Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963c00 failed (-71)!
Feb 6 03:53:56 server usb 1-2: [UEAGLE-ATM] uea_intr() failed with -84
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963900 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963b80 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963e80 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963c00 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963900 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963b80 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963e80 failed (-71)!
Feb 6 03:53:56 server hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
Feb 6 03:53:56 server usb 1-2: USB disconnect, address 2
Feb 6 03:53:56 server usb 1-2: [UEAGLE-ATM] usb_control_msg error -19
Feb 6 03:53:56 server usb 1-2: [ueagle-atm] ADSL device removed
Feb 6 03:53:56 server usb 1-2: new full speed USB device using uhci_hcd and address 3
Feb 6 03:53:57 server usb 1-2: configuration #1 chosen from 1 choice
Feb 6 03:53:57 server usb 1-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9031) Rev (0X200B): EagleIII
Feb 6 03:53:57 server usb 1-2: reset full speed USB device using uhci_hcd and address 3
Feb 6 03:53:57 server usb 1-2: [ueagle-atm] using iso mode
Feb 6 03:53:57 server usb 1-2: [ueagle-atm] (re)booting started
Feb 6 03:53:58 server usb 1-2: firmware: requesting ueagle-atm/DSPep.bin
Feb 6 03:53:59 server usb 1-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
Feb 6 03:53:59 server usb 1-2: firmware: requesting ueagle-atm/CMVep.bin.v2
Feb 6 03:53:59 server usb 1-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
Feb 6 03:53:59 server usb 1-2: firmware: requesting ueagle-atm/CMVep.bin
Feb 6 03:53:59 server usb 1-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware
Feb 6 03:53:59 server firmware.sh[1218]: Cannot find firmware file 'ueagle-atm/CMVep.bin.v2'
Feb 6 03:53:59 server usb 1-2: [ueagle-atm] modem started, waiting synchronization...
Feb 6 03:54:18 server usb 1-2: [ueagle-atm] modem operational |
przynajmniej samo sie naprawia.
problem 2:
gorszy bo sie samo nie naprawia, pppd pada i nie udaje sie polaczyc ponownie. zdarzalo sie ze w nocy padlo i przez wiele godzin to samo, ciagle brak odpowiedzi. restart pppd nic nie daje. jedyne co dziala to przeladowanie modulu, albo odpiecie i ponowne podpiecie modemu (problem z synchronizacja?) i wtedy od razu dziala. logi (jedno okrazenie petli lecacej w nieskonczonosc)
| Code: | Feb 8 02:17:47 server pppd[3863]: No response to 7 echo-requests
Feb 8 02:17:47 server pppd[3863]: Serial link appears to be disconnected.
Feb 8 02:17:47 server pppd[3863]: Connect time 79.1 minutes.
Feb 8 02:17:47 server pppd[3863]: Sent 135841267 bytes, received 243626778 bytes.
Feb 8 02:17:47 server pppd[3863]: Script /etc/ppp/ip-down started (pid 3162)
Feb 8 02:17:47 server pppd[3863]: sent [LCP TermReq id=0x17 "Peer not responding"]
Feb 8 02:17:50 server pppd[3863]: sent [LCP TermReq id=0x18 "Peer not responding"]
Feb 8 02:17:51 server pppd[3863]: Script /etc/ppp/ip-down finished (pid 3162), status = 0x0
Feb 8 02:17:54 server pppd[3863]: Connection terminated.
Feb 8 02:17:54 server pppd[3863]: Modem hangup
Feb 8 02:17:58 server pppd[3863]: using channel 30
Feb 8 02:17:58 server pppd[3863]: Using interface ppp0
Feb 8 02:17:58 server pppd[3863]: Connect: ppp0 <--> 0.35
Feb 8 02:17:58 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:17:58 server pppd[3863]: rcvd [LCP EchoReq id=0x92 magic=0x590184bd]
Feb 8 02:18:01 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:04 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:07 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:10 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:13 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:16 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:19 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:22 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:25 server pppd[3863]: sent [LCP ConfReq id=0x19 <magic 0xa49c00dc>]
Feb 8 02:18:28 server pppd[3863]: LCP: timeout sending Config-Requests
Feb 8 02:18:28 server pppd[3863]: Connection terminated.
Feb 8 02:18:28 server pppd[3863]: Modem hangup |
|
|
| Back to top |
|
|
caruso
Apprentice
Joined: 10 Jul 2005
Posts: 276
|
| Posted: Mon Feb 09, 2009 2:26 pm Post subject: |
|
|
| Quote: | Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963c00 failed (-71)!
Feb 6 03:53:56 server usb 1-2: [UEAGLE-ATM] uea_intr() failed with -84
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963900 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963b80 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963e80 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963c00 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963900 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963b80 failed (-71)!
Feb 6 03:53:56 server ATM dev 0: usbatm_complete: urb 0xe5963e80 failed (-71)! |
Takie coś mi się dzieje, na starym kompie na którym teraz chodzi neostrada. Ten modem jest awaryjny, jednak mi służy jakiś czas  (jakiś 4 model od czasu gdy mam neo), czasem wlasnie odpięcie i ponowne podpięcie działa, czasem moduł trzeba ponownie załadować, i inne "czary" stosować żeby chodzilo jak trzeba.
_________________
caruso |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish)
