Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ia64 to hp i2000
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
Emphii
n00b
n00b


Joined: 08 Oct 2004
Posts: 46

PostPosted: Tue Mar 21, 2006 9:34 am    Post subject: ia64 to hp i2000 Reply with quote

I downloaded the latest (no experimental) LiveCD for IA64 and tried it out
with this earlyitaniumws i2000 from HP.

CD boots fine, but with network adapter (e100) there is problem. Also seems
to be with usb_storage.

Here is dmesg, ifconfig -a and lspci to find out, if someone can help me - at
least to say "throw it to seagulls".

Code:
livecd root # dmesg
Linux version 2.6.15-gentoo-r5 (root@i2) (gcc version 3.3.2 20040119 (Gentoo Linux 3.3.2-r7, propolice-3.3-7)) #1 SMP PREEMPT Mon F6
EFI v1.02 by INTEL: SALsystab=0x3ff24e40 ACPI=0x3ffda0c0 ACPI 2.0=0xe2000 MPS=0x3ffd0000 SMBIOS=0xf0020
booting generic kernel on platform dig
ACPI: RSDP (v002 Intel                                 ) @ 0x00000000000e2000
ACPI: XSDT (v001 Intel  W460GXBS 0x00000001 MSFT 0x01000000) @ 0x000000003ffd8030
ACPI: FADT (v003 Intel  W460GXBS 0x00000002 MSFT 0x00010000) @ 0x000000003ffd8070
ACPI: MADT (v001 Intel  W460GXBS 0x00000000 MSFT 0x10000000) @ 0x000000003ffda000
ACPI: SSDT (v001 Intel  W460GXBS 0x00000000 INTL 0x02002011) @ 0x000000003ffd9fc8
ACPI: DSDT (v001 Intel  W460GXBS 0x00000000 INTL 0x02002011) @ 0x0000000000000000
Initial ramdisk at: 0xe00000003ee80000 (2068480 bytes)
SAL 3.0: INTEL   MSL     REF     SAL      version 1.1
SAL Platform features: BusLock IRQ_Redirection
No logical to physical processor mapping available
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
1 CPUs available, 2 CPUs total
MCA related initialization done
Virtual mem_map starts at 0xa0007fffffc80000
On node 0 totalpages: 62758
  DMA zone: 62758 pages, LIFO batch:7
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: BOOT_IMAGE=cdrom0:/efi/boot/gentoo  initrd=gentoo.igz root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/ima0
PID hash table entries: 4096 (order: 12, 131072 bytes)
CPU 0: base freq=133.288MHz, ITC ratio=11/2, ITC freq=733.084MHz
Console: colour VGA+ 80x25
Placing software IO TLB between 0x4b24000 - 0x8b24000
Memory: 926112k/1004128k available (7822k code, 91520k reserved, 2836k data, 352k init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 731.13 BogoMIPS (lpj=1462272)
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Mount-cache hash table entries: 1024
Boot processor id 0x0/0x0
Brought up 1 CPUs
Total of 1 processors activated (731.13 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 2016kB freed
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: Subsystem revision 20050902
irq 39: nobody cared (try booting with the "irqpoll" option)

Call Trace:
 [<a000000100012620>] show_stack+0x40/0xa0
                                sp=e00000003ee7fa80 bsp=e00000003ee790a0
 [<a0000001000126b0>] dump_stack+0x30/0x60
                                sp=e00000003ee7fc50 bsp=e00000003ee79088
 [<a0000001000ed060>] __report_bad_irq+0x80/0x160
                                sp=e00000003ee7fc50 bsp=e00000003ee79058
 [<a0000001000ed320>] note_interrupt+0x180/0x240
                                sp=e00000003ee7fc50 bsp=e00000003ee79020
 [<a0000001000ec090>] __do_IRQ+0x2d0/0x380
                                sp=e00000003ee7fc50 bsp=e00000003ee78fc8
 [<a0000001000112b0>] ia64_handle_irq+0xf0/0x1a0
                                sp=e00000003ee7fc50 bsp=e00000003ee78f98
 [<a00000010000c7c0>] ia64_leave_kernel+0x0/0x290
                                sp=e00000003ee7fc50 bsp=e00000003ee78f98
 [<a0000001004ae150>] acpi_ns_get_parent_node+0x70/0xc0
                                sp=e00000003ee7fe20 bsp=e00000003ee78f78
 [<a0000001004afbc0>] acpi_ns_walk_namespace+0x220/0x280
                                sp=e00000003ee7fe20 bsp=e00000003ee78f00
 [<a000000100493600>] acpi_ev_execute_reg_methods+0x60/0x80
                                sp=e00000003ee7fe20 bsp=e00000003ee78ed8
 [<a000000100492710>] acpi_ev_initialize_op_regions+0x70/0xc0
                                sp=e00000003ee7fe30 bsp=e00000003ee78eb0
 [<a0000001004c4950>] acpi_initialize_objects+0x30/0x120
                                sp=e00000003ee7fe30 bsp=e00000003ee78e90
 [<a000000100924240>] acpi_bus_init+0x60/0x1a0
                                sp=e00000003ee7fe30 bsp=e00000003ee78e78
 [<a0000001009243e0>] acpi_init+0x60/0x100
                                sp=e00000003ee7fe30 bsp=e00000003ee78e60
 [<a0000001008f9240>] do_initcalls+0x100/0x220
                                sp=e00000003ee7fe30 bsp=e00000003ee78e38
 [<a0000001008f93d0>] do_basic_setup+0x70/0xa0
                                sp=e00000003ee7fe30 bsp=e00000003ee78e20
 [<a000000100009c10>] init+0x1d0/0x420
                                sp=e00000003ee7fe30 bsp=e00000003ee78e00
 [<a000000100014b10>] kernel_thread_helper+0xd0/0x100
                                sp=e00000003ee7fe30 bsp=e00000003ee78dd0
 [<a0000001000094a0>] start_kernel_thread+0x20/0x40
                                sp=e00000003ee7fe30 bsp=e00000003ee78dd0
handlers:
[<a0000001008f5700>] (0xa0000001008f5700)
Disabling IRQ #39
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI3] (0000:03)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
ACPI: Device [CBN] status [00000008]: functional but not present; setting present
ACPI: PCI Root Bridge [CBN] (0000:04)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
perfmon: version 2.0 IRQ 238
perfmon: Itanium PMU detected, 14 PMCs, 18 PMDs, 4 counters (32 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Total HugeTLB memory allocated, 0
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
sn_pci_hotplug_init: PROM version must be greater than 4.30
EFI Time Services Driver v0.4
ACPI: Power Button (FF) [PWRF]
serio: i8042 AUX port at 0x60,0x64 irq 36
serio: i8042 KBD port at 0x60,0x64 irq 32
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:03.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1090-0x1097, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
input: AT Raw Set 2 keyboard as /class/input/input0
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse as /class/input/input1
hda: HITACHI DVD-ROM GD-7500, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
hda: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 1.20 loaded.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
GSI 47 (level, low) -> CPU 0 (0x0000) vector 48
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 47 (level, low) -> IRQ 48
uhci_hcd 0000:00:03.2: UHCI Host Controller
uhci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:03.2: irq 48, io base 0x00001040
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 2, 65536 bytes)
TCP established hash table entries: 32768 (order: 5, 524288 bytes)
TCP bind hash table entries: 32768 (order: 5, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 352kB freed
insmod[1162]: IA-64 Illegal operation fault 0 [1]
Modules linked in: usb_storage

Pid: 1162, CPU 0, comm:               insmod
psr : 00001210081a6018 ifs : 8000000000000001 ip  : [<a0000002002ec011>]    Not tainted
ip is at total_threads+0x5995/0x59c4 [usb_storage]
unat: 0000000000000000 pfs : 0000000000000205 rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr  : 0000000000029659
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70033f
csd : 0000000000000000 ssd : 0000000000000000
b0  : a0000002002ec070 b6  : 0000000000000000 b7  : a0000002002ec040
f6  : 1003e6db6db6db6db6db7 f7  : 0ffe89292f90000000000
f8  : 1003e000000000000f840 f9  : 1003e000000000006c9c0
f10 : 1000993ee38e386144780 f11 : 1003e000000000000049f
r1  : a000000100c50af0 r2  : a000000100a692d0 r3  : a0000002002dd820
r8  : 0000000000000000 r9  : a000000100a5c108 r10 : 0000000000000001
r11 : 0000000000000000 r12 : e00000003e0b7e30 r13 : e00000003e0b0000
r14 : a0000002002dc430 r15 : 0000000000004000 r16 : a000000100a692c8
r17 : 0000000000000800 r18 : 0000000000000000 r19 : a0007ffffffe4fd0
r20 : 0000000000000009 r21 : e000000001500048 r22 : 0000000000000003
r23 : 0000000000000001 r24 : 0000000000000000 r25 : 0000000000000001
r26 : 0000000000000000 r27 : 0000000000000001 r28 : a000000100a5c110
r29 : 0000000000000001 r30 : 0000000000000000 r31 : a0000002002e4280

Call Trace:
 [<a000000100012620>] show_stack+0x40/0xa0
                                sp=e00000003e0b7950 bsp=e00000003e0b1048
 [<a000000100012eb0>] show_regs+0x7d0/0x800
                                sp=e00000003e0b7b20 bsp=e00000003e0b1000
 [<a000000100037e50>] die+0x230/0x2c0
                                sp=e00000003e0b7b20 bsp=e00000003e0b0fb0
 [<a000000100037f20>] die_if_kernel+0x40/0x60
                                sp=e00000003e0b7b40 bsp=e00000003e0b0f80
 [<a0000001000389a0>] ia64_illegal_op_fault+0x60/0x160
                                sp=e00000003e0b7b40 bsp=e00000003e0b0f38
 [<a000000100003f20>] dispatch_illegal_op_fault+0x300/0x800
                                sp=e00000003e0b7c60 bsp=e00000003e0b0f38
 [<a0000002002ec010>] total_threads+0x5994/0x59c4 [usb_storage]
                                sp=e00000003e0b7e30 bsp=e00000003e0b0f30
 [<a0000002002ec070>] usb_stor_init+0x30/0xc0 [usb_storage]
                                sp=e00000003e0b7e30 bsp=e00000003e0b0f10
 [<a0000001000dd8d0>] sys_init_module+0x290/0x640
                                sp=e00000003e0b7e30 bsp=e00000003e0b0ea0
 [<a00000010000c620>] ia64_ret_from_syscall+0x0/0x20
                                sp=e00000003e0b7e30 bsp=e00000003e0b0ea0
 <4>ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda
VFS: Can't find ext3 filesystem on dev hda.
VFS: Can't find an ext2 filesystem on dev hda.
SQUASHFS error: Can't find a SQUASHFS superblock on hda
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda.
ISO 9660 Extensions: RRIP_1991A
modprobe[3631]: IA-64 Illegal operation fault 0 [2]
Modules linked in: e100 mii usb_storage

Pid: 3631, CPU 0, comm:             modprobe
psr : 00001210081a6018 ifs : 8000000000000003 ip  : [<a0000002002b4011>]    Not tainted
ip is at 0xa0000002002b4011
unat: 0000000000000000 pfs : 0000000000000186 rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr  : 0000000000169659
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70033f
csd : 0000000000000000 ssd : 0000000000000000
b0  : a0000002002b40f0 b6  : 0000000000000000 b7  : a0000002002b4040
f6  : 1003e6db6db6db6db6db7 f7  : 0ffe89346a4b800000000
f8  : 1003e000000000000f640 f9  : 1003e000000000006bbc0
f10 : 1000994a38e38db5fa184 f11 : 1003e00000000000004a5
r1  : a000000100c50af0 r2  : 0000000000000001 r3  : 0000000000000007
r8  : 0000000000000008 r9  : 0000000000000001 r10 : 0000000000000003
r11 : a0000002003231b8 r12 : e00000003d78fe30 r13 : e00000003d788000
r14 : a000000200322040 r15 : a0000002003231a0 r16 : a00000020032a158
r17 : a000000200322ec0 r18 : 0000000000000000 r19 : a0007ffffffdde80
r20 : 0000000000000003 r21 : e000000001500018 r22 : 0000000000000001
r23 : 0000000000000001 r24 : 0000000000000000 r25 : 0000000000000001
r26 : 0000000000000000 r27 : 0000000000000001 r28 : a000000100a5c110
r29 : 0000000000000001 r30 : 0000000000000000 r31 : a000000200327c80

Call Trace:
 [<a000000100012620>] show_stack+0x40/0xa0
                                sp=e00000003d78f950 bsp=e00000003d789030
 [<a000000100012eb0>] show_regs+0x7d0/0x800
                                sp=e00000003d78fb20 bsp=e00000003d788fe0
 [<a000000100037e50>] die+0x230/0x2c0
                                sp=e00000003d78fb20 bsp=e00000003d788f98
 [<a000000100037f20>] die_if_kernel+0x40/0x60
                                sp=e00000003d78fb40 bsp=e00000003d788f68
 [<a0000001000389a0>] ia64_illegal_op_fault+0x60/0x160
                                sp=e00000003d78fb40 bsp=e00000003d788f20
 [<a000000100003f20>] dispatch_illegal_op_fault+0x300/0x800
                                sp=e00000003d78fc60 bsp=e00000003d788f20
 [<a0000002002b4010>] 0xa0000002002b4010
                                sp=e00000003d78fe30 bsp=e00000003d788f08
 [<a0000002002b40f0>] e100_init_module+0xb0/0x120 [e100]
                                sp=e00000003d78fe30 bsp=e00000003d788ef0
 [<a0000001000dd8d0>] sys_init_module+0x290/0x640
                                sp=e00000003d78fe30 bsp=e00000003d788e80
 [<a00000010000c620>] ia64_ret_from_syscall+0x0/0x20
                                sp=e00000003d78fe30 bsp=e00000003d788e80
 
livecd root # ifconfig -a
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

livecd root # lspci
00:00.0 PIC: Intel Corporation 683053 Programmable Interrupt Device (rev 01)
00:01.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 05)
00:03.0 ISA bridge: Intel Corporation 82372FB PIIX5 ISA (rev 01)
00:03.1 IDE interface: Intel Corporation 82372FB PIIX5 IDE (rev 01)
00:03.2 USB Controller: Intel Corporation 82372FB PIIX5 USB (rev 01)
00:03.3 SMBus: Intel Corporation 82372FB PIIX5 SMBus (rev 01)
00:04.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
00:05.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
00:10.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
01:00.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06)
01:0f.0 PCI Hot-plug controller: Intel Corporation 82466GX Integrated Hot-Plug Controller (IHPC) (rev 01)
02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
02:0f.0 PCI Hot-plug controller: Intel Corporation 82466GX Integrated Hot-Plug Controller (IHPC) (rev 01)
03:00.0 VGA compatible controller: nVidia Corporation NV15GL [Quadro2 Pro] (rev a4)
04:00.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.1 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.2 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.3 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.4 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.5 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.6 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:00.7 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.1 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.2 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.3 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.4 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.5 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.6 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:01.7 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:04.0 Host bridge: Intel Corporation 460GX - 84460GX System Data Controller (SDC) (rev 03)
04:10.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:10.1 Host bridge: Intel Corporation 450NX - 82454NX/84460GX PCI Expander Bridge (rev 05)
04:11.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:12.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:12.1 Host bridge: Intel Corporation 460GX - 82466GX Wide and fast PCI eXpander Bridge (WXB) (rev 07)
04:13.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:13.1 Host bridge: Intel Corporation 460GX - 82466GX Wide and fast PCI eXpander Bridge (WXB) (rev 07)
04:14.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:14.1 Host bridge: Intel Corporation 460GX - 84460GX AGP Bridge (GXB function 1) (rev 02)
04:14.2 Bridge: Intel Corporation 460GX - 84460GX AGP Bridge (GXB function 2) (rev 02)
04:15.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:16.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
04:17.0 Host bridge: Intel Corporation 460GX - 84460GX System Address Controller (SAC) (rev 03)
livecd root # uname -a
Linux livecd 2.6.15-gentoo-r5 #1 SMP PREEMPT Mon Feb 13 20:09:58 UTC 2006 ia64   GNU/Linux
livecd root # model
-/bin/bash: model: command not found
livecd root #

_________________
/tmp.
Back to top
View user's profile Send private message
Emphii
n00b
n00b


Joined: 08 Oct 2004
Posts: 46

PostPosted: Mon Mar 27, 2006 2:56 pm    Post subject: Reply with quote

Ok. No serious interest?

I tried Debian ia64 installation and it did ok. It was Official netinst image.
It didn't choke with network.

Any ideas, how to get Gentoo f. IA64 to start the installation?
How to configure the network adapter?
_________________
/tmp.
Back to top
View user's profile Send private message
Kloeri
Retired Dev
Retired Dev


Joined: 02 Sep 2002
Posts: 144

PostPosted: Sat Apr 15, 2006 9:48 pm    Post subject: Reply with quote

This looks like an Itanium 1 box (guessing from the illegal instructions). Gentoo only supports Itanium 2.

I'd suggest using debian if that works or maybe trying to bootstrap Gentoo using the debian installation cd.
Back to top
View user's profile Send private message
HPRichard
Tux's lil' helper
Tux's lil' helper


Joined: 02 Feb 2005
Posts: 94
Location: KA, Germany

PostPosted: Mon Apr 17, 2006 1:52 pm    Post subject: Reply with quote

Just a question about these register dumps.
Some time ago I did some assembly programming on an Itanuim 1 (Merced) machine, and that time I learned that IA64 has 128 int and 128 fp registers, but the dumps only show the first 32 int registers.
Why?
I am asking because on my PA-RISC 1.1 machine, all 32 int and 32 fp registers get dumped.
Back to top
View user's profile Send private message
Kloeri
Retired Dev
Retired Dev


Joined: 02 Sep 2002
Posts: 144

PostPosted: Mon Apr 17, 2006 3:40 pm    Post subject: Reply with quote

HPRichard wrote:
Just a question about these register dumps.
Some time ago I did some assembly programming on an Itanuim 1 (Merced) machine, and that time I learned that IA64 has 128 int and 128 fp registers, but the dumps only show the first 32 int registers.
Why?
I am asking because on my PA-RISC 1.1 machine, all 32 int and 32 fp registers get dumped.


You only use the first 32 registers directly, the remaining registers rotates (functions like a stack) normally. See http://nicewww.cern.ch/~sverre/IA64_1.pdf for lots of details.
Back to top
View user's profile Send private message
HPRichard
Tux's lil' helper
Tux's lil' helper


Joined: 02 Feb 2005
Posts: 94
Location: KA, Germany

PostPosted: Fri Apr 21, 2006 10:25 pm    Post subject: Reply with quote

Tthanks for the documentation link, but I already knew the register stack engine, and I have already seen code using rotating registers, I was just wondering, that, in contrary to other machines, not the whole register file got dumped as you can alloc the other 96 registers if you desire to do that...
Back to top
View user's profile Send private message
Emphii
n00b
n00b


Joined: 08 Oct 2004
Posts: 46

PostPosted: Fri Apr 28, 2006 6:26 pm    Post subject: Reply with quote

Kloeri wrote:
This looks like an Itanium 1 box (guessing from the illegal instructions). Gentoo only supports Itanium 2.

I'd suggest using debian if that works or maybe trying to bootstrap Gentoo using the debian installation cd.


Hello Kloeri.

I don't really remember, and HP pages speaks only of Itanium-workstation.

Well, I started to give a try via debian installation. I just installed a disk for it at work,
so at tuesday some more "job" to do... =)

Is there any manuals, what to do? For IA64 I mean.
_________________
/tmp.
Back to top
View user's profile Send private message
Emphii
n00b
n00b


Joined: 08 Oct 2004
Posts: 46

PostPosted: Thu May 18, 2006 1:23 pm    Post subject: Reply with quote

Almost month has gone since last update. Some problems with Debian-distro, while playing with it too much.. =)
So here's where I am:

- Installed Gentoo system with chroot via Debian (not bad idea at all, can search piece of information from www
same time).
- compiled kernel couple of times, which ended up to error blaming something about mem_something.
- used kernel-configuration from Debian and stripped it a little (unnecessary drivers away and modules to drivers)

Got: booting system, which gives..
Quote:
ACPI: bus type pci registered
ACPI: Subsystem revision 20060127
irq 39: nobody cared (try booting with the "irqpoll" option)

Call Trace:
[<a000000100010d80>] show_stack+0x80/0xa0
sp=e000000008abfa20 bsp=e000000008ab9418
[<a000000100010dd0>] dump_stack+0x30/0x60
sp=e000000008abfbf0 bsp=e000000008ab9400
[<a0000001000cea70>] __report_bad_irq+0x50/0x140
sp=e000000008abfbf0 bsp=e000000008ab93c0
[<a0000001000cecf0>] note_interrupt+0x130/0x240
sp=e000000008abfbf0 bsp=e000000008ab9380
[<a0000001000cd840>] __do_IRQ+0x2a0/0x3a0
sp=e000000008abfbf0 bsp=e000000008ab9330
[<a00000010000fc10>] ia64_handle_irq+0xd0/0x160
sp=e000000008abfbf0 bsp=e000000008ab92f0
[<a00000010000b9c0>] ia64_leave_kernel+0x0/0x290
sp=e000000008abfbf0 bsp=e000000008ab92f0
[<a0000001003e7f90>] acpi_os_acquire_object+0x90/0xc0
sp=e000000008abfdc0 bsp=e000000008ab92b0
[<a000000100426490>] acpi_ut_create_generic_state+0x30/0xa0
sp=e000000008abfdc0 bsp=e000000008ab9290
[<a00000010040ce30>] acpi_ns_evaluate_relative+0x90/0x200
sp=e000000008abfdc0 bsp=e000000008ab9258
[<a000000100420370>] acpi_ut_evaluate_object+0x50/0x300
sp=e000000008abfdd0 bsp=e000000008ab9210
[<a0000001003f80a0>] acpi_ev_match_prw_and_gpe+0x40/0x2c0
sp=e000000008abfe00 bsp=e000000008ab91d8
[<a000000100410620>] acpi_ns_walk_namespace+0x120/0x280
sp=e000000008abfe10 bsp=e000000008ab9160
[<a0000001003f91f0>] acpi_ev_initialize_gpe_block+0xb0/0x1a0
sp=e000000008abfe10 bsp=e000000008ab9130
[<a0000001003f1ca0>] acpi_ev_install_fadt_gpes+0x60/0xc0
sp=e000000008abfe20 bsp=e000000008ab9108
[<a000000100423180>] acpi_enable_subsystem+0x1c0/0x200
sp=e000000008abfe20 bsp=e000000008ab90d8
[<a0000001008b2bd0>] acpi_bus_init+0x30/0x1c0
sp=e000000008abfe20 bsp=e000000008ab90c0
[<a0000001008b2dc0>] acpi_init+0x60/0x100
sp=e000000008abfe20 bsp=e000000008ab90a8
[<a000000100888f90>] do_initcalls+0xb0/0x200
sp=e000000008abfe20 bsp=e000000008ab9040
[<a000000100889140>] do_basic_setup+0x60/0x80
sp=e000000008abfe20 bsp=e000000008ab9028
[<a0000001000093f0>] init+0x90/0x300
sp=e000000008abfe20 bsp=e000000008ab9000
[<a000000100012e50>] kernel_thread_helper+0xd0/0x100
sp=e000000008abfe30 bsp=e000000008ab8fd0
[<a000000100009120>] start_kernel_thread+0x20/0x40
sp=e000000008abfe30 bsp=e000000008ab8fd0
handlers:
[<a000000100881110>] (0xa000000100881110)
Disabling IRQ #39
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing

Quote:
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 55 (level, low) -> IRQ 48
nvidiafb: PCI id - 10de0153
nvidiafb: Actual id - 10de0153
nvidiafb: nVidia device/chipset 10DE0153
nvidiafb: EDID found from BUS1
nvidiafb: Using CRT on CRTC 0
kernel unaligned access to 0xe000000008cdecce, ip=0xa0000001003bc450
kernel unaligned access to 0xe000000008cdecde, ip=0xa0000001003bc481
kernel unaligned access to 0xe000000008cdecee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe000000008cdecfe, ip=0xa0000001003bc4c1
kernel unaligned access to 0xe000000008cded0e, ip=0xa0000001003bc4e1
Console: switching to colour frame buffer device 182x73
nvidiafb: PCI nVidia NV15 framebuffer (64MB @ 0xE8000000)

Quote:
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 50
scsi(0): Reading NVRAM
kernel unaligned access to 0xe000000008c299ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe000000008c299de, ip=0xa0000001003bc481
kernel unaligned access to 0xe000000008c299ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe000000008c299fe, ip=0xa0000001003bc4c1
kernel unaligned access to 0xe000000008c29a0e, ip=0xa0000001003bc4e1
scsi(0:0): Resetting SCSI BUS
kernel unaligned access to 0xe000000008c299ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe000000008c299de, ip=0xa0000001003bc481
kernel unaligned access to 0xe000000008c299ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe000000008c299fe, ip=0xa0000001003bc4c1
kernel unaligned access to 0xe000000008c29a0e, ip=0xa0000001003bc4e1
scsi(0:1): Resetting SCSI BUS
scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter
Firmware version: 10.04.42, Driver version 3.26
kernel unaligned access to 0xe000000008c299ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe000000008c299de, ip=0xa0000001003bc481
kernel unaligned access to 0xe000000008c299ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe000000008c299fe, ip=0xa0000001003bc4c1
kernel unaligned access to 0xe000000008c29a0e, ip=0xa0000001003bc4e1
Vendor: QUANTUM Model: ATLAS10K2-TY184L Rev: DA40
Type: Direct-Access ANSI SCSI revision: 03
scsi(0:0:0:0): Sync: period 9, offset 24, Wide, DT
Vendor: SEAGATE Model: ST336705LW Rev: 5063
Type: Direct-Access ANSI SCSI revision: 03
scsi(0:0:5:0): Sync: period 9, offset 24, Wide, DT
Vendor: IBM Model: IC35L036UWD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
scsi(0:0:6:0): Sync: period 9, offset 24, Wide, DT
kernel unaligned access to 0xe000000008c2964e, ip=0xa0000001003bc450
kernel unaligned access to 0xe000000008c2965e, ip=0xa0000001003bc481
kernel unaligned access to 0xe000000008c2966e, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe000000008c2967e, ip=0xa0000001003bc4c1
kernel unaligned access to 0xe000000008c2968e, ip=0xa0000001003bc4e1
SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
sda: Write Protect is off
sda: Mode Sense: f5 00 10 08
SCSI device sda: drive cache: write through w/ FUA

Quote:
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 368kB freed
kernel unaligned access to 0xe00000003ed459ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed459d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed459de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed459e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed459ee, ip=0xa0000001003bc4a1
Adding 1486192k swap on /dev/sdb3. Priority:-1 extents:1 across:1486192k
EXT3 FS on sdb2, internal journal
kernel unaligned access to 0xe00000003ed4444e, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed44456, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed4445e, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed44466, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed4446e, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed458ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed458d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed458de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed458e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed458ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed447ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed447d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed447de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed447e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed447ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed445ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed445d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed445de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed445e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed445ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe000000008c2a04e, ip=0xa0000001003bc450
kernel unaligned access to 0xe000000008c2a056, ip=0xa0000001003bc471
kernel unaligned access to 0xe000000008c2a05e, ip=0xa0000001003bc481
kernel unaligned access to 0xe000000008c2a066, ip=0xa0000001003bc491
kernel unaligned access to 0xe000000008c2a06e, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed449ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed449d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed449de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed449e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed449ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed44a4e, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed44a56, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed44a5e, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed44a66, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed44a6e, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed445ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed445d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed445de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed445e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed445ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed445ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed445d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed445de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed445e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed445ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed445ce, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed445d6, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed445de, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed445e6, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed445ee, ip=0xa0000001003bc4a1
kernel unaligned access to 0xe00000003ed44a4e, ip=0xa0000001003bc450
kernel unaligned access to 0xe00000003ed44a56, ip=0xa0000001003bc471
kernel unaligned access to 0xe00000003ed44a5e, ip=0xa0000001003bc481
kernel unaligned access to 0xe00000003ed44a66, ip=0xa0000001003bc491
kernel unaligned access to 0xe00000003ed44a6e, ip=0xa0000001003bc4a1


.. when booting, but it runs up and network works fine.

It says, it's:
Linux version 2.6.16-gentoo-r3_hp_i2000_ (gcc version 3.3.2 20040119 (Gentoo Linux 3.3.2-r7, propolice-3.3-7)) #10 PREEMPT

With framebuffered console it has strange behaviour. Cursor is located somewhere on the
screen. It can be found every now and then, but usually it's off. I can type and do things
without it, but editing without cursor is a little painful.

I start to install gnome in now via Debian, so let's see on monday, what it has. =)
_________________
/tmp.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum