View previous topic :: View next topic |
Author |
Message |
binas77 Tux's lil' helper
Joined: 12 Nov 2005 Posts: 131 Location: Łódź
|
Posted: Wed Mar 08, 2006 4:08 am Post subject: gentoo, irda i telefon - problem z uruchomieniem portu |
|
|
Witam wszystkich forumowiczów.
Z problemem, o którym będę tu pisał nie mogę dać sobie rady ... szukałem na google, innych forach i dalej mi to nie działa.
Chodzi o skonfigurowanie portu podczerwienie dołšczanego do komputera przez USB.
Skompilowałem obsługę w jšdrze, wykonuję wszystko:
#modprobe irda irtty. irattach /dev/ttyS1 -s
#irdadump
wczeniej utworzyłem odpowiednie nody:
#mknod /dev/ircomm0 c 161 0
#mknod /dev/ircomm1 c 161 1
#mknod /dev/irlpt0 c 161 16
#mknod /dev/irlpt1 c 161 17
#mknod /dev/irnet c 10 187
#chmod 666 /dev/ir*
zainstalowałem irda-utils i openobex i dalej nic..
co robię le ??
Poniżej przedstawię wygłšd niektórych plików konfiguracyjnych:
1. wynik działania dmesg | grep tty
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
2. wynik działania lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 07d0:4959 Dazzle
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
3. wynik działania dmesg | grep usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver irda-usb
usb 4-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver usb-storage
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
4. wyglšd pliku /usr/src/linux/.config (częć dotyczšca IRDA)
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
posiadany model portu to EDISONSOFT XP TECHNOLOGY ING. model ES660
posiadany model telefonu to SE K300i
system: Gentoo Linux 2005.1
kernel: 2.6.15-gentoo-r1
Jeżeli kto już to przechodził, to niech rzuci okiem na to co napisałem i podpowie jak to mam uruchomić, albo chociaż powie gdzie mogę szukać sposobu skonfigurowania tego ustrojstwa
Dzięki i pozdrawiam
Tomek _________________ __ROZBARAT__
LRU #424198
[img]http://baner.e-palarnia.pl/baner.78.3.gif[/img] |
|
Back to top |
|
|
mrto Apprentice
Joined: 13 May 2005 Posts: 151
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|