| View previous topic :: View next topic |
| Author |
Message |
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
 Posted: Tue Nov 21, 2006 7:17 pm Post subject: [Pilotes ATI] PC freeze au log out. (j'y retourne) |
 |
|
Bonsoir
Y a t il un moyen d'avoir un environment Gentoo sous 64 bits avec un WM qui fonctionnniiZZ des le debut sans figer l'ecran en veille ?
Je suis obligé de tuer le process X (kill -9 pid ) via un autre PC via SSH et seulemetn ensuite le xdm de lance bien et j'ai la fenetre kdm pour le login.
| Quote: |
top - 20:44:07 up 1 min, 1 user, load average: 2.26, 0.79, 0.28
Tasks: 57 total, 4 running, 53 sleeping, 0 stopped, 0 zombie
Cpu(s):100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2059088k total, 74464k used, 1984624k free, 2796k buffers
Swap: 1004052k total, 0k used, 1004052k free, 30920k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10279 root 25 0 47308 7340 5528 R 99.9 0.4 0:30.23 X
|
Voila ce que j'ai fait: (on suposera que c'est une install toute fraiche de ma gentoo 64 bits)
le noyau est le 2.6.18-gentoo-r3
1/ j'ai commencé par ca http://www.gentoo.org/doc/fr/ati-faq.xml
A savoir
| Quote: |
a/VIDEO_CARDS="radeon" emerge x11-drm
b/emerge ati-drivers ===> installation des 8.30. j'chai pu combien
c/emerge ati-drivers-extra
c/emerge xorg-x11
d/eselect openggl set ati
|
ensuite je me fais un ch'tit
xorfconfig pour générer un fichier /etc/X11/xorg.conf
Seulement apres je tape
aticonfig --initial --input=/etc/X11/xorg.conf (ce que je remarque dans le fichier /etc/rc.conf c'est qu'il supprime automatiqement la ligne DISPLAYMANAGER="xdm" )
Ceci est pas trop grave puisque je la remets à la mano mais bon....
ensuite un petit rc-update add xdm default
entre temps j'ai installé des packages KDE
et j'obtiens ceci
| Quote: |
TOTO ~ # cat /etc/rc.conf
# /etc/rc.conf: Global startup script configuration settings
# UNICODE specifies whether you want to have UNICODE support in the console.
# If you set to yes, please make sure to set a UNICODE aware CONSOLEFONT and
# KEYMAP in the /etc/conf.d/consolefont and /etc/conf.d/keymaps config files.
UNICODE="yes"
# Set EDITOR to your preferred editor.
# You may use something other than what is listed here.
EDITOR="/bin/nano"
#EDITOR="/usr/bin/vim"
#EDITOR="/usr/bin/emacs"
DISPLAYMANAGER="xdm" <====== remis à la mimine pour ceux qui auraient pas suivi 
# XSESSION is a new variable to control what window manager to start
# default with X if run with xdm, startx or xinit. The default behavior
# is to look in /etc/X11/Sessions/ and run the script in matching the
# value that XSESSION is set to. The support scripts are smart enough to
# look in all bin directories if it cant find a match in /etc/X11/Sessions/,
# so setting it to "enlightenment" can also work. This is basically used
# as a way for the system admin to configure a default system wide WM,
# allthough it will work if the user export XSESSION in his .bash_profile, etc.
#
# NOTE: 1) this behaviour is overridden when a ~/.xinitrc exists, and startx
# is called.
# 2) even if ~/.xsession exists, if XSESSION can be resolved, it will
# be executed rather than ~/.xsession, else KDM breaks ...
#
# Defaults depending on what you install currently include:
#
# Gnome - will start gnome-session
# kde-<version> - will start startkde (look in /etc/X11/Sessions/)
# Xsession - will start a terminal and a few other nice apps
XSESSION="kde-3.5"
|
| Quote: |
TOTO ~ # emerge --info
Portage 2.1.2_rc2-r1 (default-linux/amd64/2006.1, gcc-4.1.1, glibc-2.5-r0, 2.6.18-gentoo-r3 x86_64)
=================================================================
System uname: 2.6.18-gentoo-r3 x86_64 AMD Athlon(tm) 64 Processor 3200+
Gentoo Base System version 1.12.6
Last Sync: Tue, 21 Nov 2006 07:30:01 +0000
ccache version 2.4 [enabled]
dev-lang/python: 2.4.4
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: 2.4-r6
sys-apps/sandbox: 1.2.18.1
sys-devel/autoconf: 2.13, 2.61
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.17
sys-devel/gcc-config: 1.3.14
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.17-r1
ACCEPT_KEYWORDS="amd64 ~amd64"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=athlon64 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/revdep-rebuild /etc/terminfo"
CXXFLAGS="-march=athlon64 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="ftp://ftp.ndlug.nd.edu/pub/gentoo/ ftp://gentoo.netnitco.net/pub/mirrors/gentoo/source/"
LINGUAS="fr"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="amd64 X alsa berkdb bitmap-fonts cdr cli cracklib crypt cups dlloader dri dvd dvdr elibc_glibc ethereal fortran ftp gdbm gpm hal iconv input_devices_keyboard input_devices_mouse ipv6 isdnlog kde kernel_linux libg++ linguas_fr ncurses nls nptl nptlonly opengl pam pcre pdf perl ppds pppd python qt qt3 readline reflection session spl ssl tcpd truetype-fonts type1-fonts udev unicode userland_GNU video_cards_fglrx video_cards_radeon wifi xorg zlib"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
|
voici mon make.conf
| Quote: |
HELL ~ # cat /etc/make.conf
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-march=athlon64 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
ACCEPT_KEYWORDS="~amd64"
VIDEO_CARDS="fglrx radeon"
LINGUAS="fr"
INPUT_DEVICES="keyboard mouse"
FEATURES="ccache"
CCACHE_DIR="/var/tmp/ccache/"
CCACHE_SIZE="2G"
USE="X pdf qt opengl alsa cdr dvd dvdr ethereal ftp hal multilib wifi kde qt3"
|
| Quote: |
cat /etc/X11/xorg.conf
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
# FontPath "/usr/share/fonts/CID/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# Load "speedo"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fo"
Option "XkbVariant" "fr"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2" # PS/2 Mouse
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.0 - 80.0
VertRefresh 60.0 - 60.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "* Generic VGA compatible"
Driver "vga"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VGA compatible"
Monitor "My Monitor"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Virtual 1600 1280
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Virtual 1280 1024
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Virtual 1152 900
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
autre infos
revdep-rebuild me demande tout le temps de recompiler le pilote ATI
Help help help !!! 
Edit :
ma CG est une ATI X800 XL sur bus AGP
| Quote: |
01:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe)
01:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) Secondary
|
D'ailleur pouquoi y a marqué PCI express en face ????
mon ecran est un Hyundai L90D+ en DVI (resolution en 1280*1024@60Hz) Freq horizontale 31-80KHz d'apres les spec.
ma souris est une MX510 usb branchée sur le PS/2 via l'adapteur USB/PS/2
Last edited by darkangel92 on Tue Dec 05, 2006 6:15 pm; edited 3 times in total |
|
| Back to top |
|
 |
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Tue Nov 21, 2006 8:13 pm Post subject: |
|
|
voici le fichier log lorsque le PC a booté et que l'ecran est en veille (Process X à 100% CPU)
| Quote: |
cat Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/TOTO:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux HELL 2.6.18-gentoo-r3 #2 Tue Nov 21 09:51:33 CET 2006 x86_64
Build Date: 21 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 21 21:05:32 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
....
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(--) PCI:*(1:0:0) ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) rev 0, Mem @ 0xe0000000/28, 0xfdef0000/16, I/O @ 0xef00/8
(--) PCI: (1:0:1) ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) Secondary rev 0, Mem @ 0xfdee0000/16
...
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
....
(II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib64/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "fglrx"
(II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.30.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.30.3
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.30g1
(II) ATI Proprietary Linux Driver Build Date: Oct 26 2006 08:05:53
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.30.1.1.2.3-driver-lnx-x86-x86_64-302518
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON X800 XL (R430 554D) found
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON X800 XL (R430 554D)" (Chipset = 0x554d)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x2124)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
...
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib64/xorg/modules/linux/libdrm.so
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR3
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
...
(II) fglrx(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
(II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 67 kHz,
(II) fglrx(0): Monitor name: L90D+ DVI
(II) fglrx(0): End of Display2 EDID data --------------------
|
en parrallele j'ai ceci
| Quote: |
cat xdm.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/TOTO:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux HELL 2.6.18-gentoo-r3 #2 Tue Nov 21 09:51:33 CET 2006 x86_64
Build Date: 21 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 21 21:05:32 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
xdm error (pid 10284): Hung in XOpenDisplay(:0), aborting
xdm error (pid 10284): server open failed for :0, giving up
xdm error (pid 10277): Display :0 cannot be opened
|
ensuite quand je kill le process X
j'obtiens cela
| Quote: |
cat Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/TOTO:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux HELL 2.6.18-gentoo-r3 #2 Tue Nov 21 09:51:33 CET 2006 x86_64
Build Date: 21 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 21 21:09:16 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(++) using VT number 7
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.30.3
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.30g1
(II) ATI Proprietary Linux Driver Build Date: Oct 26 2006 08:05:53
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.30.1.1.2.3-driver-lnx-x86-x86_64-302518
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON X800 XL (R430 554D) found
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON X800 XL (R430 554D)" (Chipset = 0x554d)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x2124)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
|
Last edited by darkangel92 on Tue Nov 21, 2006 10:24 pm; edited 1 time in total |
|
| Back to top |
|
|
nykos
Guru
Joined: 08 Jun 2005
Posts: 488
Location: Strasbourg
|
| Posted: Tue Nov 21, 2006 8:55 pm Post subject: |
|
|
essaye plutot avec
chez moi j'ai ça et ça marche
_________________
-=Nykos=-
TARGA Traveller 826T - AMD Turion 64 MT 32 1,8GHz - ATI Radeon X700 Mobility (ati-drivers) |
|
| Back to top |
|
|
Untux
Apprentice
Joined: 10 Apr 2006
Posts: 285
|
| Posted: Tue Nov 21, 2006 9:11 pm Post subject: |
|
|
Salut,
Je te suggère la lecture de ce fil (le lien pointe directement vers la solution)... A tester vu les similitudes. [X] Problème lorsque je quitte un WM.
Par ailleurs, je te suggère une petite séance de méditation avec pour thème central : « De l'emploi judicieux des insertions de logs et de fichiers de configuration dans un post. »
A ce propos...
| Code: | | grep -E -v '^(#|$)' /etc/X11/xorg.conf |
... ça fait partie des petits truc utiles pour ne pas submerger un post. Un truc parmis d'autres hein !? Faut pas se limiter ! |
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Tue Nov 21, 2006 10:26 pm Post subject: |
|
|
bon et bien rien ne fonctionne parmis vos reponses. cela ne m'etonne pas pour le lien que tu m'as donné Tutux car il date un peu
PS c'est mieux la? j'ai supprimé pas mal de log |
|
| Back to top |
|
|
nykos
Guru
Joined: 08 Jun 2005
Posts: 488
Location: Strasbourg
|
| Posted: Tue Nov 21, 2006 11:18 pm Post subject: |
|
|
t'as mis VIDEO_CARDS ati puis recompilé le serveur X ?
_________________
-=Nykos=-
TARGA Traveller 826T - AMD Turion 64 MT 32 1,8GHz - ATI Radeon X700 Mobility (ati-drivers) |
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Wed Nov 22, 2006 9:17 am Post subject: |
|
|
oui oui j'ai refait tout ca
voici le log de xdm lorsque X fige
| Quote: |
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 304 of section Screen in file /etc/X11/xorg.conf
"Option" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
xdm error (pid 10369): IO Error in XOpenDisplay
xdm error (pid 10193): Server for display :0 terminated unexpectedly: 1
xdm error (pid 10193): Display :0 cannot be opened
xdm error (pid 10193): Display :0 is being disabled
|
alors qu'avant j'avais
| Quote: |
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 21 21:05:32 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
xdm error (pid 10284): Hung in XOpenDisplay(:0), aborting
xdm error (pid 10284): server open failed for :0, giving up
xdm error (pid 10277): Display :0 cannot be opened
|
je sais pas pourquoi mais la ligne 304 de xorg.cong correspond à la fin du fichier
j'ai supprimé le xorg.conf et regenéré un tout propre (j'ai selectionne comme carte ati (generique) (pas la radeon) et mis les resoltion à 1280X1024 1024x800 etc pour tous les modes de couleur
Pas default j'ai sleectionné le 24 bit et mis 256 Mo de ram
ensuite le aticonfig blablabla
donc je vois pas pourquoi j'ai une erreur à la ligne 304 ????
ah oui encore un ch'tit log
| Quote: |
# cat Xorg.0.log | grep "(EE)"
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
# cat Xorg.0.log | grep "(WW)"
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx(0): board is an unknown third party board, chipset is supported
|
|
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Wed Nov 22, 2006 9:30 am Post subject: |
|
|
| tutux wrote: | Salut,
Je te suggère la lecture de ce fil (le lien pointe directement vers la solution)... A tester vu les similitudes. [X] Problème lorsque je quitte un WM.
Par ailleurs, je te suggère une petite séance de méditation avec pour thème central : « De l'emploi judicieux des insertions de logs et de fichiers de configuration dans un post. »
A ce propos...
| Code: | | grep -E -v '^(#|$)' /etc/X11/xorg.conf |
... ça fait partie des petits truc utiles pour ne pas submerger un post. Un truc parmis d'autres hein !? Faut pas se limiter ! |
juste un commentaire ur ton lien.
Dans quelle section dois je mettre les lignes supplémentaires? |
|
| Back to top |
|
|
Magic Banana
Veteran
Joined: 13 Dec 2005
Posts: 1912
Location: Belo Horizonte, Minas Gerais, Brasil
|
| Posted: Wed Nov 22, 2006 9:37 am Post subject: |
|
|
Visiblement il y a une erreur de syntaxe dans ton /etc/X11/xorg (peut-être un "EndSection" manquant). Pourrais-tu nous poster de nouveau ce fichier de configuration sans les commentaires. Tutux t'a donné la marche à suivre :
| Code: | | grep -E -v '^(#|$)' /etc/X11/xorg.conf |
|
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Wed Nov 22, 2006 10:46 am Post subject: |
|
|
oki doki mais je vous ferrai ca seulement ce soir. je suis au boulot!!!
P'tite question quand meme .
J'hesite à retourner en X86 a cause de ce manque de serieux de la part d'ati pour fournir des pilotes qui marchent une bonne fois pour toute pour les CG radeons.
Sont ils plus fiables ou pas? vais je rencontrer les memes galeres juste pour avoir un WM ? je repartirai de scratch en tout cas. pas question de Chrroter en 32 bits histoire d'avoir une config clean. |
|
| Back to top |
|
|
_droop_
l33t
Joined: 30 May 2004
Posts: 957
|
| Posted: Wed Nov 22, 2006 11:53 am Post subject: |
|
|
Salut,
Tu peux aussi essayer les drivers open source... Ils devraient fonctionner sur un amd64. |
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Wed Nov 22, 2006 1:01 pm Post subject: |
|
|
| _droop_ wrote: | Salut,
Tu peux aussi essayer les drivers open source... Ils devraient fonctionner sur un amd64. |
cad? je telecharge à partir du site web ati à cette adresse ?
http://ati.amd.com/support/drivers/linux64/linux64-radeon.html
ah, j'y pense. lorsque je boot sur le livecd 2006 on voit dans la sequence de boot ma souris MX510 detectée et la carte graphique ATI X800 sur AGP qui s'affichent... idem pour tous les composants (carte son par exemple)..Que dois je mettre dans mon noyau? C'est p'etre cela qui me manque pour que tout le matos soit bien installé nan?
parce que le livecd 2006.1 démarre bien une session X sous gnome (d'accord c'est en 640*480) mais bon j'ai meme pas ca. |
|
| Back to top |
|
|
_droop_
l33t
Joined: 30 May 2004
Posts: 957
|
| Posted: Wed Nov 22, 2006 2:30 pm Post subject: |
|
|
Les drivers open source sont ceux qui sont directement intégrés avec Xorg.
Il y a quelques manipulations à faire. Il y a un how to pas mal sur le wiki anglophone (je le trouve pas en francais). |
|
| Back to top |
|
|
nykos
Guru
Joined: 08 Jun 2005
Posts: 488
Location: Strasbourg
|
| Posted: Wed Nov 22, 2006 6:22 pm Post subject: |
|
|
je vois pas trop le rapport à passer en 32 bits, chez moi ati-drivers marche très bien en 64bits et de toute façon ati ne distribue plus qu'une archive pour les 2 plateformes...
_________________
-=Nykos=-
TARGA Traveller 826T - AMD Turion 64 MT 32 1,8GHz - ATI Radeon X700 Mobility (ati-drivers) |
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Wed Nov 22, 2006 6:36 pm Post subject: |
|
|
| Magic Banana wrote: | Visiblement il y a une erreur de syntaxe dans ton /etc/X11/xorg (peut-être un "EndSection" manquant). Pourrais-tu nous poster de nouveau ce fichier de configuration sans les commentaires. Tutux t'a donné la marche à suivre :
| Code: | | grep -E -v '^(#|$)' /etc/X11/xorg.conf |
|
Voila voilou
| Quote: |
grep -E -v '^(#|$)' /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # IntelliMouse PS/2
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
|
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Thu Nov 23, 2006 7:48 am Post subject: |
|
|
Bon j'ai laissé tombé et me suis tourner vers une autre distribution qui pose aucun probleme
P'etre qu'in jour je reviendrai sur Gentoo quand tout sera un peu plus mur au niveau installation et pilotes
Merci de votre aide. |
|
| Back to top |
|
|
kwenspc
Advocate
Joined: 21 Sep 2003
Posts: 4954
|
| Posted: Thu Nov 23, 2006 8:29 am Post subject: |
|
|
| darkangel92 wrote: |
P'etre qu'in jour je reviendrai sur Gentoo quand tout sera un peu plus mur au niveau installation et pilotes
|
Ben c'est surtout que gentoo demande à ses utilisateurs de comprendre ce qu'ils font. Et, sans méchanceté aucune, tu n'as pas l'air d'être prêt. Faut perseverer, ce type de "problème" ne survient que parce que l'on a fait quelque chose qu'on ne comprend pas. Ce n'est en aucun cas la distribution qui est à mettre en cause. Mais je peus admettre que tu cherches à utiliser ton ordinateur plus qu'à passer du temps à comprendre les dessous de ta distribution, alors en effet il y a des distributions plus adéquates pour ça.
_________________
membre officieux du SAV Ati GEntoo |
|
| Back to top |
|
|
El_Goretto
Moderator
Joined: 29 May 2004
Posts: 3169
Location: Paris
|
| Posted: Thu Nov 23, 2006 8:39 am Post subject: |
|
|
+1
Et puis la prochaine fois, tu prendras pas une ATI aussi, quelle idée.
(raaah, ayé, je recommence, kerzut... C'est le syndrome du gars qui va bientôt changer de carte graphique  )
_________________
-TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
| Back to top |
|
|
kwenspc
Advocate
Joined: 21 Sep 2003
Posts: 4954
|
| Posted: Thu Nov 23, 2006 8:44 am Post subject: |
|
|
| El_Goretto wrote: | +1
Et puis la prochaine fois, tu prendras pas une ATI aussi, quelle idée.
(raaah, ayé, je recommence, kerzut... C'est le syndrome du gars qui va bientôt changer de carte graphique ) |
tu commences à nier tes origines El_Goretto? 
Ati ça fonctionne bien quand on connait à fond et qu'on sait regler aux ptits oignons.
d'ailleurs ma carte graphique en ce moment c'est...une Intel!  (je vous avouerais que j'ai pas eu le choix, fin ça tourne pour ce que j'en fais)
_________________
membre officieux du SAV Ati GEntoo |
|
| Back to top |
|
|
El_Goretto
Moderator
Joined: 29 May 2004
Posts: 3169
Location: Paris
|
| Posted: Thu Nov 23, 2006 9:23 am Post subject: |
|
|
Bah, je vais ouvrir un thread pour ma pomme, et mes problèmes de video avec Xv dual-screen en non root.
_________________
-TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Thu Nov 23, 2006 10:00 am Post subject: |
|
|
eeu les gars.. je crois que j'ai trouvé une issue via l'autre distribution (ubuntu 64bits  ). j'ai aussi installé les pilote ati.
J'ai le meme plantage lorsque dans mon grub j'ai une resolution vga=791.
Pour resoudre en bootant, le pb j'edite la ligne dans mon grub et hop ca marche... probablement que la source de mon souci s'etait ca.
Flutte de crotte!!! maintenant j'ai la flemme de tout reinstaller pour veriffier ma theorie
Concernant mes détracteurs, j'etais pres pour gentoo car y a tellement de doc que forcement on sait presque tout faire.
Cependant pour des probleme pareils, ba y a des moments ou il faut aussi savoir dire.. oki y a trop de pb je vais voir un peu ailleur. c'est vrai c'est sympa de bidouillé son linux mais avouez quand meme que c'est assez casse bombons de passez son temps à troubleshoter plutot que d'utiliser son PC. en plus c'est assez long à installer des packages quand y a pas de merde avec un emerge --update --deep world et qu'un paquet te demande qu'il te faut recompiler un autre avec une autre variable use... 
Contrairement à ce que vous dites, j'ai pas mal appris grace à toutes ces merdes...
Pour ceux qui n'ont jamais eu d' ATI vous pouvez pas comprendre ma position.
je vais pas vous racontez my life mais bon la premiere fois que je me suis mis à gentoo 64 bits les pilotes ATI en 64 bits n'existaient pas. Seulement six mois apres Ati se sortait le doigts du cul...
voila voilou.. |
|
| Back to top |
|
|
kwenspc
Advocate
Joined: 21 Sep 2003
Posts: 4954
|
| Posted: Thu Nov 23, 2006 10:07 am Post subject: |
|
|
| darkangel92 wrote: |
Contrairement à ce que vous dites, j'ai pas mal appris grace à toutes ces merdes...
Pour ceux qui n'ont jamais eu d' ATI vous pouvez pas comprendre ma position.
|
Bon c'est vrai je compatis, j'ai moi même eu une radeon 9800 et c'était pas tous les jours la joie (d'autant qu'à ce moment là les drivers était vraiment pas top). Et c'est vrai, malgré des heures passées dessus il y a parfois des problèmes insolvables (pb driver Xv...ça fait 10mois que ça traîne et ils ont toujours pas résolus ça).
Par contre le coup du vga=791 je suis d'avoir vu ça quelque part, sans doute même dans le repository de doc SaVaGe (cf signature). Ce lien est incontournable pour gérer les problèmes liés à Ati.
[mode troll]Argl ubuntu c'est le *mal*, snifff pkoi pas une Debian? C'est mieux! ou alors reviens à Gentoo, là ce sera parfait ^^[/mode troll]
_________________
membre officieux du SAV Ati GEntoo |
|
| Back to top |
|
|
El_Goretto
Moderator
Joined: 29 May 2004
Posts: 3169
Location: Paris
|
| Posted: Thu Nov 23, 2006 10:28 am Post subject: |
|
|
Damned, et dire qu'on lui a même pas demandé quel framebuffer il utilisait...
On se rouille, là, faut se resaisir!
_________________
-TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
| Back to top |
|
|
darkangel92
Apprentice
Joined: 19 Nov 2006
Posts: 202
|
| Posted: Thu Nov 23, 2006 10:37 am Post subject: |
|
|
arf je pense pas qu'il y ait que cela de toute facon car ma ubuntu (oui je sais je suis sur un forum gentoo) plante aussi lors du shutdown. ecran en veille et rien d'autre.
Y a vraiment un souci avec ces pilotes ati de daube!!!!
eeeu vous pourriez pas vous cotiser svp pour que je passe à une nvidia  ? genre un equivalent de ma X800XL sur agp |
|
| Back to top |
|
|
kwenspc
Advocate
Joined: 21 Sep 2003
Posts: 4954
|
| Posted: Thu Nov 23, 2006 10:39 am Post subject: |
|
|
Ce genre de soucis apparaît quand un pilote vesa est utilisé pour le mode console. Le mieux reste de ne pas en utiliser et de rester su un bon vieux support vga et c'est tout.
_________________
membre officieux du SAV Ati GEntoo |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
