Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
kernel help
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
F-0_ICE
l33t
l33t


Joined: 06 Dec 2004
Posts: 679

PostPosted: Sat Mar 04, 2006 8:56 pm    Post subject: kernel help Reply with quote

hi i finaaly got around to installing gentoo on my new computer (see sig) and was wondering if anyone could possibly help with my kernel config. this is the first amd64 machince i have ever used so i am not familiar with the ins and outs of it. for basic information use my sig link also heres the lspci -v of the machine. thanks for the help.
Code:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64
        I/O ports at 4100 [disabled] [size=32]
        Memory at <ignored> (64-bit, non-prefetchable)

00:01.0 PCI bridge: ATI Technologies Inc Unknown device 5a3f (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fdd00000-fddfffff
        Prefetchable memory behind bridge: 00000000d8000000-00000000dff00000
        Capabilities: [44] HyperTransport: MSI Mapping
        Capabilities: [b0] #0d [0000]

00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        I/O ports at fe00 [size=8]
        I/O ports at fd00 [size=4]
        I/O ports at fc00 [size=8]
        I/O ports at fb00 [size=4]
        I/O ports at fa00 [size=16]
        Memory at fe02f000 (32-bit, non-prefetchable) [size=512]
        [virtual] Expansion ROM at 40000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
        Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
        Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
        Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: 66MHz, medium devsel
        I/O ports at 0500 [size=16]
        Memory at fe02b000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [b0] HyperTransport: MSI Mapping

00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at f800 [size=16]
        Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
        Flags: bus master, 66MHz, medium devsel, latency 64
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fdc00000-fdcfffff
        Prefetchable memory behind bridge: fde00000-fdefffff

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
        Subsystem: Hewlett-Packard Company Unknown device 2a25
        Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 193
        Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] (prog-if 00 [VGA])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at ef00 [size=256]
        Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2

02:01.0 Communication controller: Agere Systems Unknown device 0620
        Subsystem: Agere Systems Unknown device 0620
        Flags: bus master, medium devsel, latency 64, IRQ 255
        I/O ports at df00 [size=256]
        Capabilities: [f8] Power Management version 3

02:02.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
        Subsystem: Linksys Linksys WMP54G 2.0 PCI Adapter
        Flags: bus master, slow devsel, latency 64, IRQ 11
        Memory at fdcfc000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [40] Power Management version 2

02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, medium devsel, latency 64, IRQ 201
        I/O ports at de00 [size=256]
        Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at fde00000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2

02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 2a24
        Flags: bus master, medium devsel, latency 64, IRQ 169
        Memory at fdcfe000 (32-bit, non-prefetchable) [size=2K]
        I/O ports at dd00 [size=128]
        Capabilities: [50] Power Management version 2

just to note i can't get to the internet on gentoo yet cause of my rt2500 card.
_________________
~AMD64
AMD: Athlon64 X2 3800+
2G PC3200
ATI: RADEON HD 4350
Linksys: WMP54G

True Knowledge is Best Acquired Through Experience.
Back to top
View user's profile Send private message
MrUlterior
Guru
Guru


Joined: 22 Mar 2005
Posts: 510
Location: Switzerland

PostPosted: Sun Mar 05, 2006 11:34 am    Post subject: Reply with quote

I doubt anyone is going create & post a .config file for you :-P

Why not start by compiling in SerialMonkeys ralink drivers for your ra2500?
_________________

Misanthropy 2.0 - enough hate to go around
Back to top
View user's profile Send private message
drwook
Veteran
Veteran


Joined: 30 Mar 2005
Posts: 1322
Location: London

PostPosted: Sun Mar 05, 2006 12:19 pm    Post subject: Reply with quote

well you could use your RTL-8139 temporarily unless I've missed something.

Also http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=7 may be of interest to you.
Back to top
View user's profile Send private message
F-0_ICE
l33t
l33t


Joined: 06 Dec 2004
Posts: 679

PostPosted: Sun Mar 05, 2006 4:05 pm    Post subject: Reply with quote

MrUlterior wrote:
I doubt anyone is going create & post a .config file for you :-P

Why not start by compiling in SerialMonkeys ralink drivers for your ra2500?


never expected that just wanted some thoughts on some things like how do i enable hypertransport for my proc and what about sata? wheres that? some things i can't seem to find.

as for rt2500 it doesn't work with a smp kernel and running wire isn't an option for me though i wish it were...
_________________
~AMD64
AMD: Athlon64 X2 3800+
2G PC3200
ATI: RADEON HD 4350
Linksys: WMP54G

True Knowledge is Best Acquired Through Experience.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum