in All availableThis forumThis topic
Author Message
RoundsToZero
Guru

Joined: 17 Nov 2003
Posts: 478
Location: New York, NY

Posted: Tue Mar 28, 2006 9:34 pm    Post subject: question about lm_sensors alarm with Asus P4S800D-X

After some tweaking of sensors.conf, I am left with the following alarms:
 Code: VCore:     +1.56 V  (min =  +1.94 V, max =  +1.94 V)       ALARM -12V:      +6.06 V  (min = -13.18 V, max = -10.80 V)       ALARM VBat:      +0.00 V  (min =  +2.40 V, max =  +3.60 V)       ALARM

I figure the third one is okay because I know there is a battery in there and the motherboard has no problems retaining its settings as far as I know. But what about the first two? Here's the section of my sensors.conf:
 Code: chip "w83627thf-*" "w83637hf-*" # Rather than an internal inverting op amp, the 627thf uses standard positive # inputs and the negative voltages are level shifted by a 3.6V reference # (same as 82d/83s). # The math is convoluted, so we hope that your motherboard # uses the recommended resistor values. # Note that in1 (+12V) is the usual in4, and in4 (-12V) is the usual in5. # Data sheet is obviously wrong for in4, the usual formula should work. # No in5 nor in6. # sensors doesn't need the ignore lines but sensord does...     ignore in5     ignore in6     label in0 "VCore"     label in1 "+12V"     label in2 "+3.3V"     label in3 "+5V"     label in4 "-12V"     label in7 "V5SB"     label in8 "VBat" # Mori Hiroyuki reported to need this (P4P800) #   compute in0 @/2, @*2     compute in1 ((28/10)+1)*@, @/((28/10)+1)     compute in3 ((34/51)+1)*@, @/((34/51)+1)     compute in4 (5.14*@)-14.91, (@+14.91)/5.14     compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1) # adjust this if your vid is wrong; see doc/vid    set vrm 9.0 # set limits to  5% for the critical voltages # set limits to 10% for the non-critical voltages # set limits to 20% for the battery voltage # if your vid is wrong, you'll need to adjust in0_min and in0_max     set in0_min vid * 0.95     set in0_max vid * 1.05     set in1_min 12 * 0.90     set in1_max 12 * 1.10     set in2_min 3.3 * 0.95     set in2_max 3.3 * 1.05     set in3_min 5.0 * 0.95     set in3_max 5.0 * 1.05     set in4_min -12 * 1.10     set in4_max -12 * 0.90     set in7_min 5 * 0.95     set in7_max 5 * 1.05     set in8_min 3.0 * 0.80     set in8_max 3.0 * 1.20 # set up sensor types (thermistor is default) # 1 = PII/Celeron Diode; 2 = 3904 transistor; # 3435 = thermistor with Beta = 3435 # If temperature changes very little, try 1 or 2. #   set sensor1 1 #   set sensor2 2 #   set sensor3 3435     label temp1 "M/B Temp"     label temp2 "CPU Temp" #   ignore temp3 # examples for temperature limits     set temp1_over 40     set temp1_hyst 37 #    set temp2_over 52 #    set temp2_hyst 47 #    set temp3_over 52 #    set temp3_hyst 47    ignore fan1     label fan2 "CPU Fan"     set fan2_min 2000    ignore fan3
 Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First
 All times are GMT Page 1 of 1

 Jump to: Select a forum Assistance----------------News & AnnouncementsFrequently Asked QuestionsInstalling GentooMultimediaDesktop EnvironmentsNetworking & SecurityKernel & HardwarePortage & ProgrammingGamers & PlayersOther Things GentooUnsupported Software Discussion & Documentation----------------Documentation, Tips & TricksGentoo ChatGentoo Forums FeedbackOff the WallDuplicate Threads International Gentoo Users----------------中文 (Chinese)DutchFinnishFrenchDeutsches Forum (German)  Diskussionsforum  Deutsche DokumentationGreekForum italiano (Italian)  Forum di discussione italiano  Risorse italiane (documentazione e tools)Polskie forum (Polish)  Instalacja i sprzęt  Polish OTWPortuguese  Documentação, Ferramentas e DicasRussianScandinavianSpanishOther Languages Architectures & Platforms----------------Gentoo on AMD64Gentoo on PPCGentoo on SparcGentoo on Alternative ArchitecturesGentoo for Mac OS X (Portage for Mac OS X)
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum