| View previous topic :: View next topic |
| Author |
Message |
evermind
Guru
Joined: 10 Jan 2004
Posts: 322
|
 Posted: Mon Sep 22, 2008 2:38 pm Post subject: |
 |
|
| evermind wrote: | | rezysound wrote: | Hello,
--snip--
On the other hand it could be nice to provide an ebuild for the real "1.0" QT3 branch only accessible via CVS, as the last 0.9 release is quite old now. |
so what will be a good naming scheme for that? or should it be a just a useflag qt3 and qt4 for the new branch?
perhaps calling thee ebuild media-sound/museseq-0.9.9999 for the qt3 branch fits best
Whats your opinion? Thx |
no reply, so I'll add my naming scheme: muse-0.9.9999 is the name of the
ebuild which will fetches from the old qt3 aka only fixes, minor feature enhancements and the later to be released 1.0~ version |
|
| Back to top |
|
 |
fede-gentoo
n00b
Joined: 16 Sep 2008
Posts: 2
|
| Posted: Tue Sep 23, 2008 4:04 pm Post subject: thanks evermind |
|
|
thanks, i have the apps working ok , bye.
thanks very for your help |
|
| Back to top |
|
|
gouxosor
n00b
Joined: 02 Dec 2008
Posts: 3
|
| Posted: Tue Dec 02, 2008 2:13 pm Post subject: ffado compilation |
|
|
Hello, i'm trying to build libffado, but I have some questions.
The compilation of jack-audio-connection-kit-9999 failed.
I have a new installation of gentoo 2008.0, and the proaudio overlay.
First:
What is the version of libraw1394 which I must use?
Should I use libraw1394-2.0.0 or libraw1394-1.3.0_p20080114?
I have a doubt, when i read this post, about installation of ffado on archlinux:
http://www.ffado.org/?q=node/751: libraw1394-2.0.0 does not work.
Second: Which version of kernel?
My kernel version is: 2.6.24-gentoo-r5.
When i did an emerge -p libffado, the package gentoo-sources-2.6.24-r7 is marked
as a dependence.
Maybe i should install rt-sources kernel, instead, but which one?
I ask you to excuse my poor English.
Thanks
Gouxosor. |
|
| Back to top |
|
|
Dominique_71
Veteran
Joined: 17 Aug 2005
Posts: 1877
Location: Switzerland (Romandie)
|
| Posted: Thu Dec 04, 2008 8:26 pm Post subject: |
|
|
Hi guys,
I post here because I get back my new box from repair, they changed the motherboard, the cpu and the ram. The good news is that it work fine, the bad news is that I am doing a new fresh install and many softwares are not still installed.
I get a failure merging jackdmp. I guess that this will be fixed later into the svn. But portage get confused because when merging jackdmp, it perform a fake install of jack-audio-connection-kit. After that, when merging other jack aware programs, emerge fails because it thinks that jack is installed when it is not the case.
It is not a big deal because I can always run "USE="-jack" emerge ..." and update world later when jackdmp will be fixed.
_________________
"Confirm You are a robot." - the singularity |
|
| Back to top |
|
|
Dominique_71
Veteran
Joined: 17 Aug 2005
Posts: 1877
Location: Switzerland (Romandie)
|
| Posted: Thu Dec 04, 2008 8:41 pm Post subject: |
|
|
gouxosor, you must be more specific. For the error with jack-audio-connection-kit-9999, please post portage's ouput from the first error message.
For libraw, libraw1394-2.0.0 must be the latest, but if it doesn't work for you, you will have to install the other version.
For the kernel, the best choice is the one that work best for your hardware. Some old hardwares will maybe work better with older kernel and recent hardware will work better with recent kernel. 2.6.26.6-r11 (rt-sources) work fine with my asus m3a32-mvp deluxe box. I don't have tried other kernel with it.
For the choice rt-sources against gentoo-sources, it depend of what you want to do. rt-sources will perform better on heavily loaded sound system, but gentoo-sources with a rlimits aware version of pam can perfom good for many peoples. About the stability issues, rt-sources can be very reliable, most stability problems with it are coming from buggy hardware or bad IRQ configuration.
_________________
"Confirm You are a robot." - the singularity |
|
| Back to top |
|
|
gouxosor
n00b
Joined: 02 Dec 2008
Posts: 3
|
| Posted: Tue Dec 09, 2008 3:56 pm Post subject: [portage overlay] pro audio production applications |
|
|
Hi Dominique, and thanks for your answer.
I finaly solve my problem. I haven't install dbus-python. Now it's work. I emerge dbus-python before emerging jack.
I try to compile my own kernel, but finaly i use a gentoo-sources, it is not a realtime (2.6.24-gentoo-r5), but qjackctl accept reatime with 4ms of latency.
I did some optimization (rtirq, pam...)
Now i try to emerge some programs but i have sometime a problem of portage:
Unknown (getfetchlist(): 'media-sound/seq24-0.9.0' has unsupported EAPI: '2')
the same for ardour3
I don't know if i should emerge a new version of portage (i use 2.1.4.5). I have read that it will solve my probleme, but I am afraid that it puts mess. |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Tue Dec 09, 2008 5:30 pm Post subject: |
|
|
For seq24, latest ardour etc, you will have to install portage 2.1.6 at least.
The jackd 9999 ebuild is currently a bit messy, but the "stable" 0.116.1 works fine here.
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
gouxosor
n00b
Joined: 02 Dec 2008
Posts: 3
|
| Posted: Wed Dec 10, 2008 10:54 pm Post subject: [portage overlay] pro audio production applications |
|
|
Hi,
I emerge portage from 2.1.4.5 to 2.1.6_rc3.
Now i can install seq24 and ardour 2.7. I don't try to install ardour3, and all works fine.
Thanks for your response. |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Thu Dec 11, 2008 9:14 am Post subject: |
|
|
ardour3? Where did you find that?
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
Dominique_71
Veteran
Joined: 17 Aug 2005
Posts: 1877
Location: Switzerland (Romandie)
|
| Posted: Thu Dec 11, 2008 6:29 pm Post subject: |
|
|
jackbmp and jack 9999 work fine here now. 
_________________
"Confirm You are a robot." - the singularity |
|
| Back to top |
|
|
caamg
n00b
Joined: 16 Dec 2008
Posts: 5
Location: Belfort, France
|
| Posted: Tue Dec 16, 2008 7:32 pm Post subject: |
|
|
I don't know if it's the right place (I've posted this on various forum but I don't get any relevant information) but I really don't know why there's no ardour version wich works with jack-0.116.1, it can't connect to the server and always try to launch a new instance and fail (even if it was already started). And I can run Hydrogen only if jack has been run as root, mplayer detect jack-server only if I force the usage of jack with --ao jack. Other applications seems to works well.
For information i use portage 2.2_rc1 with the kernel version 2.6.27-gentoo-r4
Does any-one here have any idea? |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Tue Dec 16, 2008 8:53 pm Post subject: |
|
|
| caamg wrote: | I don't know if it's the right place (I've posted this on various forum but I don't get any relevant information) but I really don't know why there's no ardour version wich works with jack-0.116.1, it can't connect to the server and always try to launch a new instance and fail (even if it was already started). And I can run Hydrogen only if jack has been run as root, mplayer detect jack-server only if I force the usage of jack with --ao jack. Other applications seems to works well.
For information i use portage 2.2_rc1 with the kernel version 2.6.27-gentoo-r4
Does any-one here have any idea? |
For ardour I can confirum this with ardour3 branch builds. They will not start if jack is running in realtime (works fine without)
Anyways ardour 2.7.1, hydrogen and all the rest works fine.
Can you provide any console output? I.e. ardour errors, jackd logs etc.
Did you try without realtime?
We definately need more info 
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
caamg
n00b
Joined: 16 Dec 2008
Posts: 5
Location: Belfort, France
|
| Posted: Tue Dec 16, 2008 9:17 pm Post subject: |
|
|
Thanks for your reply gimpel
With or without realtime this the same
Now the logs
First I've lauched qjacktl
Ardour messages (i think there's not a lot of interesting info)
| Code: |
(built using 4296 and GCC version 4.3.2)
Copyright (C) 1999-2008 Paul Davis
Some portions Copyright (C) Steve Harris, Ari Johnson, Brett Viren, Joel Baker
Ardour comes with ABSOLUTELY NO WARRANTY
not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
This is free software, and you are welcome to redistribute it
under certain conditions; see the source for copying conditions.
loading default ui configuration file /etc/ardour2/ardour2_ui_default.conf
loading user ui configuration file /home/caamg/.ardour2/ardour2_ui.conf
Loading ui configuration file /etc/ardour2/ardour2_ui_dark.rc
theme_init() called from internal clearlooks engine
ardour: [INFO]: Ardour will be limited to 1024 open files
loading system configuration file /etc/ardour2/ardour_system.rc
loading user configuration file /home/caamg/.ardour2/ardour.rc
ardour: [INFO]: Using SSE optimized routines
ardour: [INFO]: looking for control protocols in /home/caamg/.ardour2/surfaces/:/usr/lib64/ardour2/surfaces/
ardour: [INFO]: Control surface protocol discovered: "Mackie"
ardour: [INFO]: Control protocol Tranzport not usable
powermate: Opening of powermate failed - Aucun fichier ou dossier de ce type
ardour: [INFO]: Control protocol powermate not usable
ardour: [INFO]: Control surface protocol discovered: "Generic MIDI"
(ardour-2.7.1:10131): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
(ardour-2.7.1:10131): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
(ardour-2.7.1:10131): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
(ardour-2.7.1:10131): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
JACK COMMAND: /usr/bin/jackd -p 128 -T -d alsa -n 2 -r 48000 -p 1024 -d hw:0,0
|
to have the last line I just created a new session (open an existing one is the same)
at this time I've a pop saying
| Code: |
Ardour could not start jack
There are several possible reasons:
1) You requested audio parameters that are not supported..
2) JACK is running as another user.
Please consider the possibilities, and perhaps try different parameters.
|
Jack messages (more interessting)
| Code: |
22:09:49.666 Changement du graphique des connexions ALSA.
22:09:49.678 Changement du graphique des connexions JACK.
client event poll on 17 for qjackctl starts at 46966355301
back from client event poll after 15 usecs
registered port alsa_pcm:ardour/midi_capture_1, offset = 16384
client event poll on 17 for qjackctl starts at 46966355361
back from client event poll after 6 usecs
registered port alsa_pcm:ardour/midi_playback_1, offset = 0
client event poll on 17 for qjackctl starts at 46966355402
back from client event poll after 5 usecs
registered port alsa_pcm:ardour/midi_capture_2, offset = 32768
client event poll on 17 for qjackctl starts at 46966355442
back from client event poll after 5 usecs
registered port alsa_pcm:ardour/midi_playback_2, offset = 0
client event poll on 17 for qjackctl starts at 46966355480
registered port alsa_pcm:ardour/midi_capture_3, offset = 49152
client event poll on 17 for qjackctl starts at 46966355518
back from client event poll after 5 usecs
registered port alsa_pcm:ardour/midi_playback_3, offset = 0
22:09:49.915 Changement des connexions JACK.
22:09:49.916 Changement des connexions ALSA.
22:09:50.185 Changement du graphique des connexions ALSA.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
22:09:50.365 Changement du graphique des connexions ALSA.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
load = 0.0991 max usecs: 97.000, spare = 85236.000
load = 0.1064 max usecs: 97.000, spare = 85236.000
load = 0.1100 max usecs: 97.000, spare = 85236.000
load = 0.2390 max usecs: 314.000, spare = 85019.000
load = 0.3035 max usecs: 314.000, spare = 85019.000
load = 0.5379 max usecs: 659.000, spare = 84674.000
load = 0.6551 max usecs: 659.000, spare = 84674.000
load = 0.7137 max usecs: 659.000, spare = 84674.000
load = 0.4025 max usecs: 78.000, spare = 85255.000
load = 0.2481 max usecs: 80.000, spare = 85253.000
22:10:00.444 Changement du graphique des connexions ALSA.
22:10:00.555 Changement du graphique des connexions JACK.
client event poll on 17 for qjackctl starts at 46977192925
back from client event poll after 48 usecs
client event poll on 17 for qjackctl starts at 46977192985
back from client event poll after 21 usecs
client event poll on 17 for qjackctl starts at 46977193013
back from client event poll after 21 usecs
22:10:00.558 Changement des connexions JACK.
22:10:00.559 Changement des connexions ALSA.
22:10:01.022 Changement du graphique des connexions JACK.
22:10:01.023 Changement du graphique des connexions ALSA.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
client event poll on 17 for qjackctl starts at 46977290216
back from client event poll after 10 usecs
client event poll on 17 for qjackctl starts at 46977290265
back from client event poll after 4 usecs
client event poll on 17 for qjackctl starts at 46977290285
back from client event poll after 4 usecs
load = 0.1750 max usecs: 87.000, spare = 85246.000
22:10:01.028 Changement des connexions JACK.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
22:10:01.342 Changement du graphique des connexions ALSA.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
|
PS: jack command line:
/usr/bin/jackd -v -p1024 -t1000 -dalsa -r48000 -p4096 -n2 -D -Chw:0 -Phw:0 -o2 -Xseq |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Tue Dec 16, 2008 9:53 pm Post subject: |
|
|
Hm, nothing strange in there.
Could you please post the jack log from the startup onwards (qjackctl -> messages)
And if you are using jack-audio-connection-kit from pro-audio overlay, which useflags do you have enabled?
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
caamg
n00b
Joined: 16 Dec 2008
Posts: 5
Location: Belfort, France
|
| Posted: Tue Dec 16, 2008 10:27 pm Post subject: |
|
|
Ok
The jack-audio-connection-kit use-flags:
USE="3dnow alsa dbus mmx sse (-altivec) -celt (-coreaudio) -cpudetection -debug -doc -examples -freebob -ieee1394 -netjack -oss"
[/code]
All qjackctl messages
| Code: |
23:24:09.521 Baie de brassage désactivée.
23:24:09.542 Réinitialisation des statistiques.
23:24:09.582 JACK démarre...
23:24:09.583 /usr/bin/jackd -v -p1024 -t1000 -dalsa -r48000 -p4096 -n2 -D -Chw:0 -Phw:0 -o2 -Xseq
getting driver descriptor from /usr/lib64/jack/jack_net.so
getting driver descriptor from /usr/lib64/jack/jack_dummy.so
getting driver descriptor from /usr/lib64/jack/jack_alsa.so
jackd 0.116.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
server `default' registered
registered builtin port type 32 bit float mono audio
registered builtin port type 8 bit raw midi
clock source = system clock via clock_gettime
start poll on 3 fd's
loading driver ..
new client: alsa_pcm, id = 1 type 1 @ 0x6147c0 fd = -1
apparent rate = 48000
creating alsa driver ... hw:0|hw:0|4096|2|48000|0|2|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 4096 frames (85.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
23:24:09.707 Changement du graphique des connexions ALSA.
23:24:09.707 JACK a été démarrer avec le PID=15821.
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
new buffer size 4096
registered port system:capture_1, offset = 16384
registered port system:capture_2, offset = 32768
registered port system:playback_1, offset = 0
registered port system:playback_2, offset = 0
++ jack_sort_graph
++ jack_rechain_graph():
+++ client is now alsa_pcm active ? 1
client alsa_pcm: internal client, execution_order=0.
-- jack_rechain_graph()
-- jack_sort_graph
15821 waiting for signals
23:24:10.287 Changement du graphique des connexions ALSA.
load = 0.0674 max usecs: 115.000, spare = 85218.000
load = 0.1011 max usecs: 115.000, spare = 85218.000
load = 0.0699 max usecs: 33.000, spare = 85300.000
23:24:13.222 Configuration du serveur enregistrée dans "/home/caamg/.jackdrc".
23:24:13.228 Réinitialisation des statistiques.
23:24:13.236 Client activé.
23:24:13.240 Changement des connexions JACK.
23:24:13.242 Changement du graphique des connexions JACK.
server thread back from poll
new client: qjackctl, id = 2 type 2 @ 0x7fcce1a8f000 fd = 20
start poll on 4 fd's
server thread back from poll
new client qjackctl using 21 for events
start poll on 4 fd's
server thread back from poll
++ jack_sort_graph
++ jack_rechain_graph():
+++ client is now alsa_pcm active ? 1
client alsa_pcm: internal client, execution_order=0.
+++ client is now qjackctl active ? 1
client qjackctl: start_fd=7, execution_order=0.
client event poll on 21 for qjackctl starts at 51429905650
back from client event poll after 44 usecs
client qjackctl: wait_fd=19, execution_order=1 (last client).
-- jack_rechain_graph()
-- jack_sort_graph
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
load = 0.0853 max usecs: 86.000, spare = 85247.000
23:24:14.650 Changement du graphique des connexions ALSA.
23:24:14.686 Changement des connexions ALSA.
23:24:14.698 Changement du graphique des connexions JACK.
client event poll on 21 for qjackctl starts at 51431370169
back from client event poll after 36 usecs
registered port alsa_pcm:ardour/midi_capture_1, offset = 16384
client event poll on 21 for qjackctl starts at 51431370236
back from client event poll after 21 usecs
registered port alsa_pcm:ardour/midi_playback_1, offset = 0
client event poll on 21 for qjackctl starts at 51431370282
back from client event poll after 19 usecs
registered port alsa_pcm:ardour/midi_capture_2, offset = 32768
client event poll on 21 for qjackctl starts at 51431370328
back from client event poll after 19 usecs
registered port alsa_pcm:ardour/midi_playback_2, offset = 0
client event poll on 21 for qjackctl starts at 51431370371
back from client event poll after 19 usecs
registered port alsa_pcm:ardour/midi_capture_3, offset = 49152
client event poll on 21 for qjackctl starts at 51431370414
back from client event poll after 20 usecs
registered port alsa_pcm:ardour/midi_playback_3, offset = 0
23:24:14.703 Changement du graphique des connexions ALSA.
23:24:14.918 Changement des connexions JACK.
23:24:14.931 Changement du graphique des connexions ALSA.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
load = 0.2038 max usecs: 275.000, spare = 85058.000
load = 0.2630 max usecs: 275.000, spare = 85058.000
load = 0.2346 max usecs: 176.000, spare = 85157.000
load = 0.2204 max usecs: 176.000, spare = 85157.000
load = 0.1770 max usecs: 114.000, spare = 85219.000
load = 0.1553 max usecs: 114.000, spare = 85219.000
23:24:20.870 Changement du graphique des connexions ALSA.
23:24:20.907 Changement du graphique des connexions JACK.
client event poll on 21 for qjackctl starts at 51437583092
back from client event poll after 39 usecs
client event poll on 21 for qjackctl starts at 51437583146
back from client event poll after 19 usecs
client event poll on 21 for qjackctl starts at 51437583180
back from client event poll after 17 usecs
client event poll on 21 for qjackctl starts at 51437657164
back from client event poll after 32 usecs
client event poll on 21 for qjackctl starts at 51437657205
back from client event poll after 11 usecs
client event poll on 21 for qjackctl starts at 51437657223
back from client event poll after 9 usecs
23:24:21.030 Changement des connexions JACK.
23:24:21.031 Changement des connexions ALSA.
23:24:21.120 Changement du graphique des connexions ALSA.
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
server thread back from poll
start poll on 4 fd's
load = 0.1562 max usecs: 134.000, spare = 85199.000
load = 0.1566 max usecs: 134.000, spare = 85199.000
load = 0.1568 max usecs: 134.000, spare = 85199.000
load = 0.1405 max usecs: 106.000, spare = 85227.000
load = 0.1212 max usecs: 87.000, spare = 85246.000
23:24:25.770 Client désactivé.
23:24:25.775 JACK s'arrête...
server thread back from poll
+++ deactivate qjackctl
++ jack_sort_graph
++ jack_rechain_graph():
+++ client is now alsa_pcm active ? 1
client alsa_pcm: internal client, execution_order=0.
-- jack_rechain_graph()
-- jack_sort_graph
start poll on 4 fd's
server thread back from poll
marking client qjackctl with SOCKET error state = Running errors = 0
trying to lock graph to remove 1 problems
we have problem clients (problems = 1
++ Removing failed clients ...
client alsa_pcm error status 0
client qjackctl error status 10000000
removing failed client qjackctl state = Running errors = 10000000
removing client "qjackctl"
removing client "qjackctl" from the processing chain
+++ deactivate qjackctl
++ jack_sort_graph
++ jack_rechain_graph():
+++ client is now alsa_pcm active ? 1
client alsa_pcm: internal client, execution_order=0.
-- jack_rechain_graph()
-- jack_sort_graph
-- Removing failed clients ...
after removing clients, problems = 0
start poll on 3 fd's
jack main caught signal 15
starting server engine shutdo
23:24:26.037 JACK a été arrêté avec succès.
23:24:26.038 Script post-extinction...
23:24:26.038 killall jackd
wn
stopping driver
server thread back from poll
unloading driver
freeing shared port segments
stopping server thread
last xrun delay: 0.000 usecs
max delay reported by backend: 29596.000 usecs
freeing engine shared memory
max usecs: 275.000, engine deleted
cleaning up shared memory
cleaning up files
unregistering server `default'
23:24:26.060 Changement du graphique des connexions ALSA.
23:24:26.184 Changement du graphique des connexions ALSA.
jackd: aucun processus tué
23:24:26.445 Script post-extinction terminé avec statut de sortie=256.
|
|
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Wed Dec 17, 2008 10:41 pm Post subject: |
|
|
Okay. That could be some problem with jackdbus.
Try to compile it with USE="-dbus", or just killall -9 jackdbus, start jack normally, and see if helps.
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
caamg
n00b
Joined: 16 Dec 2008
Posts: 5
Location: Belfort, France
|
| Posted: Thu Dec 18, 2008 12:14 am Post subject: |
|
|
I recompile jack without dbus USE-flag (and ardour also) and no jackdbus was running (I even stoped dbus deamon)
but nothing seems to have changed here... |
|
| Back to top |
|
|
caamg
n00b
Joined: 16 Dec 2008
Posts: 5
Location: Belfort, France
|
| Posted: Tue Dec 30, 2008 1:39 am Post subject: |
|
|
I repost here just to say that the issue seems coming from alsa, yesterday morning alsa came back to default configuration (saying chipset Realtek AL268, I've an ICH8 Family one). So may be snd_hda_intel on kernel 2.6.27 fault (I should update from r4 to r7 to see if it change something, but it can also break it)
Even after reboots all works fine, but I don't know how many times it will... |
|
| Back to top |
|
|
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
| Posted: Thu Jan 15, 2009 11:40 pm Post subject: SMSTools fails to build |
|
|
SMSTools won't build on my system.
| Code: |
scons: warning: The Options class is deprecated; use the Variables class instead.
File "/var/tmp/portage/media-sound/SMSTools-0.4.10/work/SMSTools-0.4.10/SConstruct", line 6, in <module>
scons: warning: The PathOption() function is deprecated; use the PathVariable() function instead.
File "/var/tmp/portage/media-sound/SMSTools-0.4.10/work/SMSTools-0.4.10/SConstruct", line 7, in <module>
scons: warning: The BoolOption() function is deprecated; use the BoolVariable() function instead.
File "/var/tmp/portage/media-sound/SMSTools-0.4.10/work/SMSTools-0.4.10/SConstruct", line 9, in <module>
EnvironmentError: No tool named 'clam': not a Zip file:
File "/var/tmp/portage/media-sound/SMSTools-0.4.10/work/SMSTools-0.4.10/SConstruct", line 42:
env.Tool('clam', toolpath=[clam_sconstoolspath])
File "//usr/lib/scons-1.2.0/SCons/Environment.py", line 1675:
tool = apply(SCons.Tool.Tool, (tool, toolpath), kw)
File "//usr/lib/scons-1.2.0/SCons/Tool/__init__.py", line 95:
module = self._tool_module()
File "//usr/lib/scons-1.2.0/SCons/Tool/__init__.py", line 155:
raise SCons.Errors.EnvironmentError, m
*
* ERROR: media-sound/SMSTools-0.4.10 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 2061: Called die
* The specific snippet of code:
* scons clam_prefix=/usr DESTDIR="${D}/usr" prefix="${D}/usr" release=yes || die "Build failed";
* The die message:
* Build failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/media-sound/SMSTools-0.4.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-sound/SMSTools-0.4.10/temp/environment'.
* This ebuild is from an overlay named 'proaudio': '/usr/local/portage/layman/pro-audio/'
|
The pro-audio overlay is up to date. Here's my emerge --info:
| Code: |
Portage 2.2_rc22 (default/linux/x86/2008.0, gcc-4.3.2, glibc-2.9_p20081201-r1, 2.6.26-gentoo-r4 i686)
=================================================================
System uname: Linux-2.6.26-gentoo-r4-i686-Intel-R-_Celeron-R-_CPU_2.40GHz-with-glibc2.0
Timestamp of tree: Thu, 15 Jan 2009 17:15:02 +0000
ccache version 2.4 [enabled]
app-shells/bash: 3.2_p48
dev-java/java-config: 1.3.7-r1, 2.1.6-r1
dev-lang/python: 2.4.4-r15, 2.5.2-r8
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache: 2.4-r8
dev-util/cmake: 2.6.2-r1
sys-apps/baselayout: 2.0.0
sys-apps/openrc: 0.4.2
sys-apps/sandbox: 1.3.2
sys-devel/autoconf: 2.13, 2.63
sys-devel/automake: 1.4_p6, 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.19
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 2.2.6a
virtual/os-headers: 2.6.28-r1
ACCEPT_KEYWORDS="x86 ~x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT=""
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="buildpkg ccache distlocks fixpackages parallel-fetch preserve-libs protect-owned sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo/ http://mirrors.cs.wmich.edu/gentoo/"
LDFLAGS="-Wl,-O1"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage/layman/pro-audio /usr/local/portage"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="X aac accessibility acl acpi addbookmarks aim alias alsa apm audacious audiofile autoreplace avahi bash-completion berkdb branding bzip2 cairo cdaudio cdb cdda cddb cdio cdparanoia cdr cdrom cdsound cli connectionstatus contactnotes cracklib crypt cups cupsddk dbus dri dssi dvd dvdr dvdread dvi embedded encode escreen evo exif ffmpeg firefox3 flac fontconfig fortran ftp gdbm gif gimp git gmail gphoto2 gpm gtk gtkspell hal highlight history howl-compat iconv icq id3 id3tag ieee1394 ipv6 isdnlog jabber jack java jpeg juju kde ladspa lash libnotify mdnsresponder-compat midi mp3 mp3tunes mp4 mpeg msn mtp mudflap musicbrainz ncurses new-login nls nptlonly nsplugin ogg openexr opengl openmp pam pcre pdf perl png portaudio ppds pppd prediction pulseaudio python qt-dbus qt3 qt3support qt4 quicktime raw readline reflection s3 samba scanner scrobbler session shout slp soundtouch spell spl ssl startup-notification subversion svg sysfs tagwriting tcpd texteffect threads tiff timidity truetype unicode visualization vorbis wav webpresence win32codecs winpopup wma wmp x86 xcb xcf xcomposite xft xmlrpc xorg xpm xscreensaver xulrunner yahoo zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CAMERAS="canon" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="intel"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
Bug?
_________________
decibel Linux: https://decibellinux.org
Github: https://github.com/Gentoo-Music-and-Audio-Technology
Facebook: https://www.facebook.com/decibellinux
Discord: https://discord.gg/73XV24dNPN |
|
| Back to top |
|
|
Dominique_71
Veteran
Joined: 17 Aug 2005
Posts: 1877
Location: Switzerland (Romandie)
|
| Posted: Sun Jan 18, 2009 6:29 pm Post subject: |
|
|
It should work now. The DEPEND - RDEPEND was screwed into the ebuild. You may have to mask xerces-c into /etc/portage/package.mask:
| Code: | | >=dev-libs/xerces-c-2.8 |
.
_________________
"Confirm You are a robot." - the singularity |
|
| Back to top |
|
|
Rob Paxon
n00b
Joined: 27 Mar 2006
Posts: 26
|
| Posted: Wed Feb 11, 2009 7:40 pm Post subject: |
|
|
The proaudio bugtracker sign-up page isn't working for me and this isn't a big deal so I'll just say it here.
The location of the source for the media-sound/xmms2tray ebuild has changed, here is the proper line:
SRC_URI="http://code.jollybox.de/pub/xmms2tray/xmms2tray-${PV}.tar.gz"
On a related note, I just gave a go of altering the ebuild from 0.4-r2 to 0.5, only changing the filename, and everything seems to be working fine. I am using the live ebuild of xmms2 though, so the minimum version requirement for 0.5 is probably different.
Anyone with account there, it'd be helpful to the maintainers if you could relay this information. Thanks. |
|
| Back to top |
|
|
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
| Posted: Thu Feb 19, 2009 8:54 pm Post subject: Recent libfreebob emerge fail |
|
|
This happened on my last world update:
| Code: |
make[2]: *** [libfreebobavc/avc_extended_plug_info.lo] Error 1
make[2]: Leaving directory `/var/tmp/portage/sys-libs/libfreebob-1.0.11/work/libfreebob-1.0.11/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/sys-libs/libfreebob-1.0.11/work/libfreebob-1.0.11'
make: *** [all] Error 2
*
* ERROR: sys-libs/libfreebob-1.0.11 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 82: Called die
* The specific snippet of code:
* emake || die "emake failed"
* The die message:
* emake failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/sys-libs/libfreebob-1.0.11/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libfreebob-1.0.11/temp/environment'.
* This ebuild is from an overlay named 'gentoo': '/usr/local/portage/'
*
|
emerge --info:
| Code: |
Portage 2.2_rc23 (default/linux/x86/2008.0, gcc-4.3.3, glibc-2.9_p20081201-r2, 2.6.27-gentoo-r7 i686)
=================================================================
System uname: Linux-2.6.27-gentoo-r7-i686-Intel-R-_Celeron-R-_CPU_2.40GHz-with-glibc2.0
Timestamp of tree: Thu, 19 Feb 2009 16:45:02 +0000
ccache version 2.4 [enabled]
app-shells/bash: 3.2_p48-r1
dev-java/java-config: 1.3.7-r1, 2.1.7
dev-lang/python: 2.4.4-r15, 2.5.4-r2
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache: 2.4-r8
dev-util/cmake: 2.6.2-r1
sys-apps/baselayout: 2.0.0
sys-apps/openrc: 0.4.3-r1
sys-apps/sandbox: 1.3.7
sys-devel/autoconf: 2.13, 2.63
sys-devel/automake: 1.4_p6, 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.19.1
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6a
virtual/os-headers: 2.6.28-r1
ACCEPT_KEYWORDS="x86 ~x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /etc/conf.d/hostname /etc/conf.d/xdm /etc/cups/cupsd.conf /etc/slim.conf /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks fixpackages parallel-fetch preserve-libs protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.osuosl.org/ http://distro.ibiblio.org/pub/linux/distributions/gentoo/ http://www.gtlib.gatech.edu/pub/gentoo http://gentoo.mirrors.pair.com/ "
LDFLAGS="-Wl,-O1"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage/layman/pro-audio /usr/local/portage"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="X aac accessibility acl acpi addbookmarks aim alias alsa apache2 apm audacious audiofile audioscrobbler automount autoreplace avahi bash-completion berkdb branding bzip2 cairo calendar cdaudio cdb cdda cddb cdio cdparanoia cdr cdrom cdsound cli connectionstatus contactnotes cracklib crypt ctype cups cupsddk curl curlwrappers custom-optimization dbus dri dssi dts dvd dvdr dvdread dvi embedded encode escreen evo exif f-prot fam ffmpeg firefox3 flac fluidsynth fontconfig foomaticdb fortran ftp garmin gd gdbm gif gimp git gmail gmp gphoto2 gpm gtk gtkspell hal hash highlight history howl-compat iconv icq id3 id3tag ieee1394 iptc ipv6 isdnlog jabber jack java jpeg juju kde ladspa lame lash ldap libnotify mad mdnsresponder-compat menubar midi mmx mp3 mp3tunes mp4 mpeg msn mtp mudflap musicbrainz mysql ncurses new-login nls nptlonly nsplugin ogg openexr opengl openmp pae pam pcre pdf perl php pidgin png portaudio ppds pppd prediction pulseaudio python qt-dbus qt3 qt3support qt4 quicktime raw readline reflection s3 samba scanner screenshot scrobbler session shout slp soap soundtouch sox spell spl sse sse2 ssl startup-notification subversion svg sysfs tagwriting tcpd texteffect threads tidy tiff timidity truetype unicode utempter visualization vorbis wav wavpack wddx webpresence win32codecs winpopup wma wmp x86 xcb xcf xcomposite xft xml xmlreader xmlrpc xmlwriter xorg xpm xprint xscreensaver xsl xulrunner yahoo yaz zip zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CAMERAS="*" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="intel"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
Let me know if I should post anything else.
_________________
decibel Linux: https://decibellinux.org
Github: https://github.com/Gentoo-Music-and-Audio-Technology
Facebook: https://www.facebook.com/decibellinux
Discord: https://discord.gg/73XV24dNPN |
|
| Back to top |
|
|
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
| Posted: Wed Mar 04, 2009 7:03 pm Post subject: |
|
|
http://proaudio.tuxfamily.org/wiki/index.php?title=DAW_Digital_Audio_Workstation
The section for 2.6 kernels is out of date and provides conflicting information.
| Code: |
* realtime-lsm-0.8.5.tar.gz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found kernel object directory:
* /lib/modules/2.6.28-gentoo-r2/build
* Found sources for kernel version:
* 2.6.28-gentoo-r2
>>> Unpacking source...
* Since version 2.6.24 of the Linux kernel, security capabilities can't be
* made into a module, and external security modules can't be compiled any
* longer.
* Please refer to the Realtime Guide to set up a PAM-based realtime group.
* http://www.gentoo.org/proj/en/desktop/sound/realtime.xml
*
* ERROR: sys-apps/realtime-lsm-0.8.5-r2 failed.
* Call stack:
* ebuild.sh, line 49: Called src_unpack
* environment, line 3230: Called die
* The specific snippet of code:
* die "Unsupported kernel version.";
* The die message:
* Unsupported kernel version.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/sys-apps/realtime-lsm-0.8.5-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/realtime-lsm-0.8.5-r2/temp/environment'.
*
|
_________________
decibel Linux: https://decibellinux.org
Github: https://github.com/Gentoo-Music-and-Audio-Technology
Facebook: https://www.facebook.com/decibellinux
Discord: https://discord.gg/73XV24dNPN |
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
|
| Back to top |
|
|
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Unsupported Software
