Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[portage overlay] pro audio production applications
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, ... 31, 32, 33  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Sat Feb 25, 2006 1:04 pm    Post subject: Reply with quote

Its me again! I have a little problem with rtsynth.
It is here.
_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Sat Feb 25, 2006 7:23 pm    Post subject: Reply with quote

Dominique_71 wrote:
Its me again! I have a little problem with rtsynth.
It is here.


thx for reporting
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Mon Mar 06, 2006 11:12 am    Post subject: Reply with quote

new ebuild for dssi-vst (linker gcc4 fix)
new ebuild meterbridge
first-post
Back to top
View user's profile Send private message
phadsge
n00b
n00b


Joined: 08 Oct 2004
Posts: 17

PostPosted: Fri Mar 10, 2006 12:25 pm    Post subject: great work Reply with quote

thx for this overlay...

been compiling lots o those apps on my own in the past.
finally all can be emerged :D

could you please add:
- libconvolve + jack-convolve, dssi-convolve
- simsam


~ph.
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Fri Mar 10, 2006 1:36 pm    Post subject: Reply with quote

@phadsge
thx I look at them and try to provide an ebuild
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Fri Mar 10, 2006 9:45 pm    Post subject: Reply with quote

@phadsge @all
new snapshot: first-post
Code:
- add media-libs/dssi_convolve-0.0.4. (suggested by phadsge)
- add media-libs/jack_convolve-0.0.13 (suggested by phadsge)
- add media-libs/libconvolve-0.0.8 (suggested by phadsge)
- add media-sound/simsam/simsam-0.1.7 (suggested by phadsge)
- add media-libs/libdsp-5.0.2

please test those ebuilds and report (I've problems with libdsp-5.0.2 and gcc4.1)
Back to top
View user's profile Send private message
el_Salmon
Guru
Guru


Joined: 15 Dec 2003
Posts: 327
Location: Around 2.4GHz

PostPosted: Sat Mar 11, 2006 3:15 pm    Post subject: Reply with quote

Cool! 8) I love this portage overlay.
Back to top
View user's profile Send private message
zehnan1
Tux's lil' helper
Tux's lil' helper


Joined: 08 Oct 2004
Posts: 90
Location: Slovenia

PostPosted: Sat Mar 11, 2006 4:48 pm    Post subject: Reply with quote

Great stuff man, :)

I'm runing amd64, is it worth trying to use the packages with missing keywords?
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Sat Mar 11, 2006 7:36 pm    Post subject: Reply with quote

zehnan1 wrote:
Great stuff man, :)

I'm runing amd64, is it worth trying to use the packages with missing keywords?


you can try and report if it works so I can add a keyword
Back to top
View user's profile Send private message
phadsge
n00b
n00b


Joined: 08 Oct 2004
Posts: 17

PostPosted: Mon Mar 13, 2006 10:39 am    Post subject: Reply with quote

thx again evermind.

libdsp,libconvolve,dssi_convolve and also simsam are working just fine.

i had some error with jack_convolve though, see below...

Code:

g++ -c jack_convolve.cc -O2 -march=pentium4 -pipe -fomit-frame-pointer -I/usr/include
jack_convolve.cc: In function `int main(int, char**)':
jack_convolve.cc:238: error: `load_response' undeclared (first use this function)
jack_convolve.cc:238: error: (Each undeclared identifier is reported only once for each function it appears in.)
make: *** [jack_convolve.o] Error 1


it appears to me, that this isn't your fault as i get the same error when trying to build from source without your ebuild.

EDIT:
the error was caused by an older convolve.h in my /usr/local/include. jack_convolve is fine now :)

EDIT2:
further wishes for addition


EDIT3:
i had problems with specimen, so i renamed your ebuild to represent the latest version... success.
so maybe you can update to 0.5.1.

~ph.
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Mon Mar 13, 2006 11:09 pm    Post subject: Reply with quote

@phadsge
great that it finally works for you
I'll look at your wishlist soon
Back to top
View user's profile Send private message
phadsge
n00b
n00b


Joined: 08 Oct 2004
Posts: 17

PostPosted: Tue Mar 14, 2006 2:36 pm    Post subject: Lash Reply with quote

me again.

today i tried to "lashify" my audioapps
i did so like it's said in the first post.

so now i have working lash in:

  • fluidsynth
  • jack_convolve
  • jack-rack
  • timemachine

no success though with:

  • vkeybd
  • specimen
  • meterbridge

maybe this'll help:
here are lash-patches for seq24, meterbridge & specimen...

~ph.
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Wed Mar 15, 2006 11:58 pm    Post subject: Re: Lash Reply with quote

phadsge wrote:
me again.

today i tried to "lashify" my audioapps
i did so like it's said in the first post.

no success though with:
  • vkeybd
  • specimen
  • meterbridge

maybe this'll help:
here are lash-patches for seq24, meterbridge & specimen...

~ph.


thx for the patches

now those apps also have lash support:
- update media-sound/seq24-0.8.3-r1 (lash-support added -- NOT TESTED)
- update media-sound/meterbridge-0.9.2-r2 (lash-support added)
- update media-sound/vkeybd-0.1.17-r1 (lash enabled by default)
(earlier you had to type: vkeybd --lash yes)
- add media-sound/specimen-0.5.1 (lash-support added)

other updates/adds

- add sys-kernel/rt-sources-2.6.16_rc6-rt7 (with experimental reiser4 support
via USE=reiser4) reiser4 seems to work with realtime-patch.
UPDATE: reiser4 support dropped -- permanent boot oops
But I don't know if latentencies are suitable for audio-work
- add sys-kernel/rt-sources-2.6.15-rt21
- add media-sound/bpmdj-2.9

rt-sources: This is a vanilla kernel with
  • realtime-patch from Ingo Molnar
  • realtime-lsm modul
  • vesafb-tng-patch

Currently two series of rt-sources you can emerge
Code:
emerge =rt-sources-2.6.15-r21

and
Code:
ACCEPT_KEYWORDS=~x86 emerge =rt-sources-2.6.16_rc6-r7

The 2.6.15-rt series is yet more stable than the recent 2.6.16_rc6-rt series

INFO: rt-sources are not supported by Gentoo
If you have any issues, try a matching vanilla-sources ebuild -- if the problem persists there, please fill
a bug at http://bugme.osdl.org. If the problem only occurs with rt-sources then
please contact Ingo Molnar on the kernel mailinglist to get your issue resolved.
But first search the mailinglist-archiv if your problem is already discussed/solved: http://lkml.org/
Recommended other packages: sys-process/rtirq and sys-apps/das_watchdog"


Last edited by evermind on Thu Mar 23, 2006 11:14 pm; edited 2 times in total
Back to top
View user's profile Send private message
gimpel
Advocate
Advocate


Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria

PostPosted: Thu Mar 16, 2006 12:25 am    Post subject: Reply with quote

wohow, -rt + reiser4. /me waits for flames :P

but my /, /usr and /home are on reiser4, so... will do backups and give that a try! awesome...

EDIT:
it compiled (yay!), it booted.... and had an OOPS somewhere at the end of init3 executing runscript.sh. But i guess that's not that much reiser4 related, as mounting the partitions etc worked out fine.
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
Back to top
View user's profile Send private message
phadsge
n00b
n00b


Joined: 08 Oct 2004
Posts: 17

PostPosted: Thu Mar 16, 2006 3:02 pm    Post subject: lash again Reply with quote

great update, evermind.

tried new seq24,vkeybd,specimen,meterbridge
all built fine and all but seq24 now have lash working.

~ph.
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Thu Mar 16, 2006 4:29 pm    Post subject: Re: lash again Reply with quote

phadsge wrote:
great update, evermind.

tried new seq24,vkeybd,specimen,meterbridge
all built fine and all but seq24 now have lash working.

~ph.


thx

fetch the overlay once again. I`ve changed the seq24 ebuild (now lash-support should work)
Back to top
View user's profile Send private message
babykart
Guru
Guru


Joined: 08 Oct 2004
Posts: 415

PostPosted: Thu Mar 16, 2006 6:17 pm    Post subject: Reply with quote

thanks for this very good overlay... :D
_________________
>> Gentoo-FR <<
-----
Back to top
View user's profile Send private message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Fri Mar 17, 2006 3:37 pm    Post subject: Reply with quote

I don't know either for reiserfs 4 and latenties. I believe at the hardware issue will be a greater source of problems in most cases. For those having a low budget, Firewire is the best solution. It is even IDE to Firewire adapter on the marquet that can be plugged directly on a IDE drive. If using IDE (Atapi-ATA) controller to do recording work, the partition where you are recording to, must be alone on the controller (it mean alone on the cable from the controller). This because even fast IDE drives and controllers will be very slow when the system access 2 drives or 2 different partitions on the same IDE controller. Firewire is much better for that.

Of course, SCSI is best, but expansive.

SCSI vs. IDE vs. USB vs. FireWire
I/O Technology Comparison
_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Fri Mar 17, 2006 4:39 pm    Post subject: Reply with quote

I get the following error with jackmix:
Code:
i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I.. -I../backend -I../guilib -I../volumegroup -I/usr/qt/3/include  -DQT_THREAD_SUPPORT  -D_REENTRANT  -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Os -march=pentium4 -pipe -msse -msse2 -mmmx -pipe -fomit-frame-pointer -fno-ident -fforce-addr -ftracer -fweb -fvisibility-inlines-hidden -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common  -c -o xmlintirtual-dtor -Wno-long-long -Wundef -Wall -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Os -march=pentium4 -pipe -msse -msse2 -mmmx -pipe -fomit-frame-pointer -fno-ident -fforce-addr -ftracer -fweb -fvisibility-inlines-hidden -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common   -WI,-O1 -WI,--sort-common -o jackmix -L/usr/qt/3/lib  mainwindow.o channelwidget.o xmlinterface.o main.o ../guilib/libjackmix_gui.la ../backend/libjackmix_backend.la ../volumegroup/libjackmix_vg.la -lqt-mt  -lz -lpng -lz -lm -lXext -lX11  -lSM -lICE -lpthread -ljack
make[3]: Leaving directory `/var/tmp/portage/jackmix-0.0.3/work/jackmix-0.0.3/jackmix'
make[2]: Leaving directory `/var/tmp/portage/jackmix-0.0.3/work/jackmix-0.0.3/jackmix'
make[2]: Entering directory `/var/tmp/portage/jackmix-0.0.3/work/jackmix-0.0.3'
make[2]: Rien à faire pour « all-am ».
make[2]: Leaving directory `/var/tmp/portage/jackmix-0.0.3/work/jackmix-0.0.3'
make[1]: Leaving directory `/var/tmp/portage/jackmix-0.0.3/work/jackmix-0.0.3'
--------------------------- ACCESS VIOLATION SUMMARY ---------------------------
LOG FILE = "/var/log/sandbox/sandbox-media-sound_-_jackmix-0.0.3-10492.log"

open_wr:   /usr/qt/3/etc/settings/.qtrc.lock
open_wr:   /usr/qt/3/etc/settings/.qtrc.lock

I have try to recalculate the ebuild with "ebuild /usr/pro_music_apps/media-sound/jackmix/jackmix-0.0.3.ebuild digest", but it doesn't help.
.qtrc.lock is empty and I have try to move around it, but it doesn't help either.
_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Fri Mar 17, 2006 4:59 pm    Post subject: Reply with quote

I get the following with libclalsadrv
Code:
>>> emerge (1 of 7) media-libs/libclalsadrv-1.0.3 to /
!!! Files listed in the manifest do not exist!
files/.libclalsadrv-1.0.3-makefile.patch.swp
localhost dom # localhost media-libs #


I removed the 3 first lines in the manifest and it work now.
_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Fri Mar 17, 2006 5:22 pm    Post subject: Reply with quote

Me again,
I get another error, with sweep
Code:
if i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../intl -I../include -I../src/tdb -I/usr/include -I/usr/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/alsa      -Os -march=pentium4 -pipe -msse -msse2 -mmmx -pipe -fomit-frame-pointer -fno-ident -fforce-addr -ftracer -fweb -Wall -MT driver_alsa.o -MD -MP -MF ".deps/driver_alsa.Tpo" -c -o driver_alsa.o driver_alsa.c; \
then mv -f ".deps/driver_alsa.Tpo" ".deps/driver_alsa.Po"; else rm -f ".deps/driver_alsa.Tpo"; exit 1; fi
driver_alsa.c: In function `alsa_device_setup':
driver_alsa.c:220: attention : passage de l'argument n°3 de « snd_pcm_hw_params_set_rate_near » transforme un pointeur en entier sans transtypage
driver_alsa.c:229: attention : passage de l'argument n°3 de « snd_pcm_hw_params_set_channels_near » transforme un pointeur en entier sans transtypage
driver_alsa.c:238: attention : passage de l'argument n°3 de « snd_pcm_hw_params_set_period_size_near » transforme un pointeur en entier sans transtypage
driver_alsa.c:248: attention : passage de l'argument n°3 de « snd_pcm_hw_params_set_periods_near » transforme un pointeur en entier sans transtypage
driver_alsa.c:277: erreur: trop d'arguments pour la fonction « snd_pcm_hw_params_get_rate »
driver_alsa.c:283: erreur: trop d'arguments pour la fonction « snd_pcm_hw_params_get_channels »
make[3]: *** [driver_alsa.o] Erreur 1
make[3]: *** Attente des tâches non terminées....
make[3]: Leaving directory `/var/tmp/portage/sweep-0.9.1/work/sweep-0.9.1/src'
make[2]: *** [all-recursive] Erreur 1
make[2]: Leaving directory `/var/tmp/portage/sweep-0.9.1/work/sweep-0.9.1/src'
make[1]: *** [all-recursive] Erreur 1
make[1]: Leaving directory `/var/tmp/portage/sweep-0.9.1/work/sweep-0.9.1'
make: *** [all] Erreur 2

_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Fri Mar 17, 2006 7:50 pm    Post subject: Reply with quote

One more, with rt-sources:
Code:
20:35:24 (326.83 KB/s) - « patch-2.6.15-rt21 » sauvegardé [1792119/1792119]

/usr/pro_music_apps/eclass/realtime-patch.eclass: line 16: /patch-2.6.15-rt21: Aucun fichier ou répertoire de ce type

!!! ERROR: sys-kernel/rt-sources-2.6.15-r21 failed.
!!! Function fetch_realtime_patch, Line 41, Exitcode 0
!!! md5sum missmatch
!!! If you need support, post the topmost build error, NOT this status message.

I solved it by copying /var/tmp/portage/rt-sources-2.6.15-r1/work/patch-2.6.15-rt21 to /usr/portage/distfiles/patch-2.6.15-rt21
and by adding "PORTAGE_ACTUAL_DISTDIR="/usr/portage/distfiles" in eclass/realtime-patch.eclass, but I believe at it must be another way to do that.
_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Fri Mar 17, 2006 7:56 pm    Post subject: Reply with quote

@Dominique_71

try to fetch the overlay once again and test if jackmix works now

I´ll fix the others tomorrow
Back to top
View user's profile Send private message
Dominique_71
Veteran
Veteran


Joined: 17 Aug 2005
Posts: 1505
Location: Switzerland (Romandie)

PostPosted: Fri Mar 17, 2006 11:58 pm    Post subject: Reply with quote

Thank you, jackmix work just fine. :D
_________________
[[[ To any NSA and FBI agents reading that text: please consider ]]]
[[[ whether defending the US Constitution against all enemies, ]]]
[[[ foreign or domestic, requires you to follow Snowden's example. ]]]
Back to top
View user's profile Send private message
evermind
Guru
Guru


Joined: 10 Jan 2004
Posts: 322

PostPosted: Sat Mar 18, 2006 5:58 pm    Post subject: Reply with quote

new release: first-post
rt-sources should work now


Last edited by evermind on Thu Mar 23, 2006 11:17 pm; edited 2 times in total
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page Previous  1, 2, 3, ... 31, 32, 33  Next
Page 2 of 33

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum