miclass
n00b
Joined: 06 Jan 2006
Posts: 13
Location: Genoa - Italy
|
 Posted: Fri Jan 06, 2006 10:16 am Post subject: lspci output is different if I change kernel |
 |
|
Hi all, I have installed Gentoo PPC on an IBM RS/6000 7046-B50...I have done the installation using a kernel 2.4.32 booted from floppy, and then compiled the gentoo kernel 2.6.14. Everything seems to work but when I try to see hardware list with lspci it returns different hardware from one kernel to the other.
This is the output when I boot the installed Gentoo using the kernel 2.4.32 from floppy:
lspci -vvx
| Code: | 00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, Cache Line Size 08
00: 57 10 02 00 46 41 80 20 40 00 00 06 08 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 ISA bridge: Symphony Labs W83C553 (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: ad 10 65 05 47 01 00 02 10 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (500ns min, 10000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at bfd800 [size=8]
Region 1: I/O ports at bfd000 [size=4]
Region 2: I/O ports at bfdc00 [size=8]
Region 3: I/O ports at bfd400 [size=4]
Region 4: I/O ports at bfe000 [size=16]
Region 5: I/O ports at bfe400 [size=16]
00: ad 10 05 01 45 01 80 02 05 8f 01 01 08 10 80 00
10: 01 d8 bf 00 01 d0 bf 00 01 dc bf 00 01 d4 bf 00
20: 01 e0 bf 00 01 e4 bf 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 02 28
00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at bfe800 [size=32]
Region 1: Memory at fc9bd000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fca00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 e8 bf 00 00 d0 9b fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 a0 fc 00 00 00 00 00 00 00 00 16 01 06 ff
00:0d.0 Class ff00: IBM MPIC interrupt controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fc9c0000 (32-bit, non-prefetchable) [size=256K]
00: 14 10 46 00 02 00 00 02 00 00 00 ff 00 00 00 00
10: 00 00 9c fc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (4250ns min, 16000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at bfec00 [size=256]
Region 1: Memory at fc9be000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fc9bf000 (32-bit, non-prefetchable) [size=4K]
00: 00 10 0f 00 47 01 00 02 04 00 00 01 08 12 00 00
10: 01 ec bf 00 00 e0 9b fc 00 f0 9b fc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 17 01 11 40
00:12.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18, Cache Line Size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 00bff000-00bfffff
Memory behind bridge: fcb00000-fcffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00: 11 10 26 00 47 01 90 02 05 00 04 06 08 12 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 80 f1 f1 80 22
20: b0 fc f0 fc 01 01 f1 00 00 00 00 00 00 00 00 00
30: bf 00 bf 00 dc 00 00 00 00 00 00 00 00 00 03 00
01:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at bff000 [size=32]
Region 1: Memory at fcbfc000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fcc00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 f0 bf 00 00 c0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 c0 fc 00 00 00 00 00 00 00 00 12 01 06 ff
01:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at bff400 [size=32]
Region 1: Memory at fcbfd000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fcd00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 f4 bf 00 00 d0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 d0 fc 00 00 00 00 00 00 00 00 11 01 06 ff
01:02.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at bff800 [size=32]
Region 1: Memory at fcbfe000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fce00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 f8 bf 00 00 e0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 e0 fc 00 00 00 00 00 00 00 00 11 01 06 ff
01:03.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at bffc00 [size=32]
Region 1: Memory at fcbff000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fcf00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 fc bf 00 00 f0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 f0 fc 00 00 00 00 00 00 00 00 11 01 06 ff |
lspci -n
| Code: | 00:00.0 0600: 1057:0002 (rev 40)
00:0b.0 0601: 10ad:0565 (rev 10)
00:0b.1 0101: 10ad:0105 (rev 05)
00:0c.0 0200: 1022:2000 (rev 26)
00:0d.0 ff00: 1014:0046
00:10.0 0100: 1000:000f (rev 04)
00:12.0 0604: 1011:0026 (rev 05)
01:00.0 0200: 1022:2000 (rev 26)
01:01.0 0200: 1022:2000 (rev 26)
01:02.0 0200: 1022:2000 (rev 26)
01:03.0 0200: 1022:2000 (rev 26) |
And this is the output when I boot with the kernel 2.6.14:
lspci -vvx
| Code: | 00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, Cache Line Size 08
00: 57 10 02 00 46 41 80 20 40 00 00 06 08 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 ISA bridge: Symphony Labs W83C553 (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: ad 10 65 05 47 01 00 02 10 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (500ns min, 10000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at febfd800 [size=8]
Region 1: I/O ports at febfd000 [size=4]
Region 2: I/O ports at febfdc00 [size=8]
Region 3: I/O ports at febfd400 [size=4]
Region 4: I/O ports at febfe000 [size=16]
Region 5: I/O ports at febfe400 [size=16]
00: ad 10 05 01 45 01 80 02 05 8f 01 01 08 10 80 00
10: 01 d8 bf 00 01 d0 bf 00 01 dc bf 00 01 d4 bf 00
20: 01 e0 bf 00 01 e4 bf 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 02 28
00:0c.0 Ethernet controller: Trident Microsystems 4DWave DX (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at febfe800 [size=32]
Region 1: Memory at fc9bd000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fca00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 e8 bf 00 00 d0 9b fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 a0 fc 00 00 00 00 00 00 00 00 16 01 06 ff
00:0d.0 Class ff00: IBM MPIC interrupt controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fc9c0000 (32-bit, non-prefetchable) [size=256K]
00: 14 10 46 00 02 00 00 02 00 00 00 ff 00 00 00 00
10: 00 00 9c fc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (4250ns min, 16000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at febfec00 [size=256]
Region 1: Memory at fc9be000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fc9bf000 (32-bit, non-prefetchable) [size=4K]
00: 00 10 0f 00 57 01 00 02 04 00 00 01 08 12 00 00
10: 01 ec bf 00 00 e0 9b fc 00 f0 9b fc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 17 01 11 40
00:12.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18, Cache Line Size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 00bff000-00bfffff
Memory behind bridge: fcb00000-fcffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00: 11 10 26 00 47 01 90 02 05 00 04 06 08 12 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 80 f1 f1 80 22
20: b0 fc f0 fc 01 01 f1 00 00 00 00 00 00 00 00 00
30: bf 00 bf 00 dc 00 00 00 00 00 00 00 00 00 03 00
01:00.0 Ethernet controller: Trident Microsystems 4DWave DX (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at febff000 [size=32]
Region 1: Memory at fcbfc000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fcc00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 f0 bf 00 00 c0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 c0 fc 00 00 00 00 00 00 00 00 12 01 06 ff
01:01.0 Ethernet controller: Trident Microsystems 4DWave DX (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at febff400 [size=32]
Region 1: Memory at fcbfd000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fcd00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 f4 bf 00 00 d0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 d0 fc 00 00 00 00 00 00 00 00 11 01 06 ff
01:02.0 Ethernet controller: Trident Microsystems 4DWave DX (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at febff800 [size=32]
Region 1: Memory at fcbfe000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fce00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 f8 bf 00 00 e0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 e0 fc 00 00 00 00 00 00 00 00 11 01 06 ff
01:03.0 Ethernet controller: Trident Microsystems 4DWave DX (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 18 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at febffc00 [size=32]
Region 1: Memory at fcbff000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fcf00000 [disabled] [size=1M]
00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
10: 01 fc bf 00 00 f0 bf fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 f0 fc 00 00 00 00 00 00 00 00 11 01 06 ff |
lspci -n
| Code: | 00:00.0 0600: 1057:0002 (rev 40)
00:0b.0 0601: 10ad:0565 (rev 10)
00:0b.1 0101: 10ad:0105 (rev 05)
00:0c.0 0200: 1023:2000 (rev 26)
00:0d.0 ff00: 1014:0046
00:10.0 0100: 1000:000f (rev 04)
00:12.0 0604: 1011:0026 (rev 05)
01:00.0 0200: 1023:2000 (rev 26)
01:01.0 0200: 1023:2000 (rev 26)
01:02.0 0200: 1023:2000 (rev 26)
01:03.0 0200: 1023:2000 (rev 26) |
The kernel 2.6.14 is the gentoo one, compiled during the installation, while the 2.4.32 is a generic kernel that I compiled using a debian and it uses a static /dev.
As you can see from the output, using kernel 2.4.32 the five ethernet controllers are corrected identified as Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] while using kernel 2.6.14 they become Trident Microsystems 4DWave DX (that is a sound card!  ).
I also add the output of dmesg...this is kernel 2.4.32:
| Code: | Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb
Total memory = 256MB; using 512kB for hash table (at c0300000)
Linux version 2.4.32 (root@RS6000) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #5 Thu Dec 22 22:04:02 CET 2005
PCI buses 0..1 controlled by pci at 80000000
RTAS Event Scan Rate: 1 calls/minute (every 6000 jiffies)
On node 0 totalpages: 65536
zone(0): 65536 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda3 console=ttyS0
OpenPIC at fc9c0000 (size 40000)
OpenPIC irqs 0..15 in IDU
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fd3be000
time_init: decrementer frequency = 20.781719 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 373.55 BogoMIPS
Memory: 255644k available (1712k kernel code, 728k data, 324k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Don't know how to access NVRAM with 4 addresses
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
initialize_kbd: Keyboard reset failed, no ACK
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
PCI: Enabling device 00:0c.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbfe800, fa ff ff 7f f7 5f
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
eth0: registered as PCnet/FAST 79C971
PCI: Enabling device 01:00.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff000, warning: CSR address invalid,
using instead PROM address of 00 06 29 6e 30 14
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 18.
eth1: registered as PCnet/FAST 79C971
PCI: Enabling device 01:01.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff400, warning: CSR address invalid,
using instead PROM address of 00 06 29 6e 30 15
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
eth2: registered as PCnet/FAST 79C971
PCI: Enabling device 01:02.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff800, warning: CSR address invalid,
using instead PROM address of 00 06 29 6e 30 16
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
eth3: registered as PCnet/FAST 79C971
PCI: Enabling device 01:03.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbffc00, warning: CSR address invalid,
using instead PROM address of 00 06 29 6e 30 17
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
eth4: registered as PCnet/FAST 79C971
pcnet32: 5 cards_found.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
W82C105: IDE controller at PCI slot 00:0b.1
PCI: Enabling device 00:0b.1 (0140 -> 0141)
W82C105: chipset revision 5
W82C105: 100% native mode on irq 255
ide0: BM-DMA at 0xbfe000-0xbfe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xbfe008-0xbfe00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
SCSI subsystem driver Revision: 1.00
PCI: Enabling device 00:10.0 (0140 -> 0143)
sym53c8xx: at PCI bus 0, device 16, function 0
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x4 on pci bus 0 device 16 function 0 irq 23
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
blk: queue c0996174, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IBMAS400 Model: DGVS09U Rev: 1641
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c0996274, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IBM Model: CDRM00203 !K Rev: 1_02
Type: CD-ROM ANSI SCSI revision: 02
blk: queue c0996374, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IBMAS400 Model: DGVS09U Rev: 1641
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c0996474, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 4, lun 0
sym53c875-0-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sda: 17177940 512-byte hdwr sectors (8795 MB)
Partition check:
sda: sda1 sda2 sda3
sym53c875-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sdb: 17177940 512-byte hdwr sectors (8795 MB)
sdb: sdb1 sdb2 sdb3
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sym53c875-0-<3,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Macintosh non-volatile memory driver v1.0
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 324k init 36k pmac 8k prep
Adding Swap: 500728k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 |
And this is kernel 2.6.14:
| Code: | Total memory = 256MB; using 512kB for hash table (at c0380000)
Linux version 2.6.14-gentoo-r5 (root@livecd) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #4 Thu Jan 5 17:36:18 CET 2006
PCI buses 0..1 controlled by pci at 80000000
RTAS Event Scan Rate: 1 (7499 jiffies)
On node 0 totalpages: 65536
DMA zone: 65536 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro console=ttyS0
OpenPIC at fc9c0000 (size 40000)
OpenPIC irqs 0..15 in IDU
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fd3be000
PID hash table entries: 2048 (order: 11, 32768 bytes)
time_init: decrementer frequency = 20.781719 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255360k available (2388k kernel code, 960k data, 192k init, 0k highmem)
Calibrating delay loop... 373.76 BogoMIPS (lpj=747520)
Mount-cache hash table entries: 512
device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,604e@0
NET: Registered protocol family 16
PCI: Probing PCI hardware
Registering openpic with sysfs...
SCSI subsystem initialized
request_OF_resource(interrupt-controller), parent not found
Initializing Cryptographic API
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 2.88M
atkbd.c: keyboard reset failed on isa0060/serio1
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pcnet32.c:v1.30j 29.04.2005 tsbogend@alpha.franken.de
PCI: Enabling device 0000:00:0c.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbfe800, fa ff ff 7f f7 5f
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
eth0: registered as PCnet/FAST 79C971
PCI: Enabling device 0000:01:00.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff000, ff ff ff ff ff ff
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 18.
eth1: registered as PCnet/FAST 79C971
PCI: Enabling device 0000:01:01.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff400, warning: CSR address invalid,
using instead PROM address of 00 06 29 6e 30 15
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
eth2: registered as PCnet/FAST 79C971
PCI: Enabling device 0000:01:02.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff800, ff ff ff ff ff ff
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
eth3: registered as PCnet/FAST 79C971
PCI: Enabling device 0000:01:03.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbffc00, ff ff ff ff ff ff
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
eth4: registered as PCnet/FAST 79C971
pcnet32: 5 cards_found.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
W82C105: IDE controller at PCI slot 0000:00:0b.1
PCI: Enabling device 0000:00:0b.1 (0140 -> 0141)
W82C105: chipset revision 5
W82C105: 100% native mode on irq 255
ide0: BM-DMA at 0xbfe000-0xbfe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xbfe008-0xbfe00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
atkbd.c: keyboard reset failed on isa0060/serio0
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
PCI: Enabling device 0000:00:10.0 (0140 -> 0143)
sym0: <875> rev 0x4 at pci 0000:00:10.0 irq 23
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.1
Vendor: IBMAS400 Model: DGVS09U Rev: 1641
Type: Direct-Access ANSI SCSI revision: 03
target0:0:2: tagged command queuing enabled, command queue depth 16.
target0:0:2: Beginning Domain Validation
target0:0:2: asynchronous.
target0:0:2: wide asynchronous.
target0:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
target0:0:2: Ending Domain Validation
Vendor: IBM Model: CDRM00203 !K Rev: 1_02
Type: CD-ROM ANSI SCSI revision: 02
target0:0:3: Beginning Domain Validation
target0:0:3: asynchronous.
target0:0:3: wide asynchronous.
target0:0:3: Domain Validation skipping write tests
target0:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
target0:0:3: Ending Domain Validation
Vendor: IBMAS400 Model: DGVS09U Rev: 1641
Type: Direct-Access ANSI SCSI revision: 03
target0:0:4: tagged command queuing enabled, command queue depth 16.
target0:0:4: Beginning Domain Validation
target0:0:4: asynchronous.
target0:0:4: wide asynchronous.
target0:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
target0:0:4: Ending Domain Validation
SCSI device sda: 17177940 512-byte hdwr sectors (8795 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 17177940 512-byte hdwr sectors (8795 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
SCSI device sdb: 17177940 512-byte hdwr sectors (8795 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 17177940 512-byte hdwr sectors (8795 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 4, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 5
Attached scsi generic sg2 at scsi0, channel 0, id 4, lun 0, type 0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k init 32k pmac 8k prep
Adding 500728k swap on /dev/sda2. Priority:-1 extents:1 across:500728k
EXT3 FS on sda3, internal journal
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 |
How is this possible?
Thanks!
Miclàss. |
|
Kernel & Hardware
