| View previous topic :: View next topic |
| Author |
Message |
mo-ca
Guru
Joined: 17 Feb 2003
Posts: 313
Location: Near Dresden, Germany
|
 Posted: Tue Mar 11, 2003 3:31 pm Post subject: brennen schlägt immer fehl :( |
 |
|
| Code: | bash-2.05b# cdrecord dev=1,0,0 -v /tmp/brenner/natisec2.cue
Cdrecord 2.01a04 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'RICOH '
Identifikation : 'CD-R/RW MP7200A '
Revision : '1.30'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB padsize: 598 KB
Total size: 0 MB (00:04.02) = 302 sectors
Lout start: 1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 333750 (74:12/00)
1T speed low: 4 1T speed high: 10
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 00 00 00
Disk type: Phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Trying to clear drive status.
Forcespeed is OFF.cdrecord: Drive needs to reload the media to return to proper status.
Forcespeed is OFF.
Starting to write CD/DVD at speed 10 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 240s
Writing time: 4.770s
Average write speed 525.9x.
Fixating...
Fixating time: 0.003s
cdrecord: fifo had 1 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
|
egal was ich brenne, der fixt immer ne weile und beendet dann. Was soll ich machen?[/code] |
|
| Back to top |
|
 |
sputnik1969
Guru
Joined: 08 Aug 2002
Posts: 401
Location: Berlin / Germany
|
| Posted: Wed Mar 12, 2003 12:18 pm Post subject: |
|
|
Die Geschwindigkeit drosseln.
Dein Brenner zeigt an, das er einen 6x RW-Rohling erkennt und du versucht mit 10x zu schreiben, das geht in die Hose...
Wenn es mit 6x auch nicht geht solltest Du die Firmware des Brenners updaten... Dann erkennt er den Rohling nicht richtig...
_________________
'Cynic' is a word invented by optimists to criticize realists. - Nigel. In the ocean of Night by Gregory Benford
"Zyniker" ist ein Wort das Optimisten erfunden haben um Realisten zu kritisieren. - Nigel. Im Meer der Nacht von Gregory Benford |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
