| View previous topic :: View next topic |
| Author |
Message |
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
 Posted: Thu Mar 06, 2003 9:15 am Post subject: Nach Kenerleneukompilierung geht kein Brenner mehr, ... |
 |
|
Hi,
ich habe erst jetzt bemerkt, dass mein Brenner nicht mehr als SCSI emuliert wird. Das Ganze finde ich ziemlich komisch, denn ich habe nicht viel verändert. Da ich den Fehler erst heute bemerkt habe, gehe ich mal davon aus, dass der Fehler seit meinem Umstieg auf gentoo-sources-2.4.20-r1 auftritt, kann aber keine Garantie dafür abgeben.
Ich habe den neueren Kernel eigentlich per "make oldconfig" konfiguriert. Ich habe nochwas an den ACPI Einstellungen geändert, aber nichts an den SCSI Einstellungen.
In der menu.lst von grub steht auch "hdd=ide-scsi", daran habe ich auch nichts geändert. Ich habe die SCSI-Emulation fix im Kernel, also muss ich auch keine Module laden (wie gesagt, ich habe seit gentoo-source-2.4.19-r10 nichts geändert und bei dem älteren Kernel funktionierte der Brenner).
Von "cdrecord -scanbus" bekomme ich folgende ausgabe:
| Code: | Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'. |
Ich habe auch schon einen Beitrag im Forum gesehen, dass auch andere dieses Problem hatten, es allerdings nur durch einen Umstieg auf den älteren Kernel lösen konnten. Allerdings war der Eintrag schon etwas älter, ...
Gibt es denn jetzt eine Lösung?
Niko
_________________
Meine Homepage |
|
| Back to top |
|
 |
therjak
Tux's lil' helper
Joined: 19 Feb 2003
Posts: 79
|
| Posted: Thu Mar 06, 2003 9:52 am Post subject: |
|
|
| wie sieht es denn mit den /dev/scsi sachen aus. bei mir waer das /dev/sr0 /dev/sr1 und natuerlich die eigentlichen devfs eintraege unter /dev/scsi/... wenn die nicht da sind, musst du wohl noch mal in den kernel schaun. sonst wuesst ich auch nicht |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Thu Mar 06, 2003 10:13 am Post subject: Keine Einträge |
|
|
Hi,
leider gibt es da keine Einträge bei mir, der Brenner ist auch als IDE erkannt, ...
Aber, wie gesagt, beim alten Kernel funktionierte es mit der selben Konfiguration
Ich poste mal am besten meine .config:
| Code: | #
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_LOLAT=y
CONFIG_LOLAT_SYSCTL=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M586MMX31 is not set
# CONFIG_M686 is not set
# CONFIG_M68631 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMIII31 is not set
# CONFIG_MPENTIUM4 is not set
CONFIG_MPENTIUM431=y
# CONFIG_MK6 is not set
# CONFIG_MK6231 is not set
# CONFIG_MK7 is not set
# CONFIG_MK731 is not set
# CONFIG_MXP31 is not set
# CONFIG_MMP31 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_05GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
CONFIG_PNP=y
# CONFIG_ISAPNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set
#
# Enterprise Volume Management System
#
# CONFIG_EVMS is not set
# CONFIG_EVMS_LOCAL_DEV_MGR is not set
# CONFIG_EVMS_DOS_SEGMENT_MGR is not set
# CONFIG_EVMS_GPT_SEGMENT_MGR is not set
# CONFIG_EVMS_SNAPSHOT is not set
# CONFIG_EVMS_DRIVELINK is not set
# CONFIG_EVMS_BBR is not set
# CONFIG_EVMS_LVM is not set
# CONFIG_EVMS_MD is not set
# CONFIG_EVMS_MD_LINEAR is not set
# CONFIG_EVMS_MD_RAID0 is not set
# CONFIG_EVMS_MD_RAID1 is not set
# CONFIG_EVMS_MD_RAID5 is not set
# CONFIG_EVMS_AIX is not set
# CONFIG_EVMS_OS2 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Cryptography support (CryptoAPI)
#
# CONFIG_CRYPTO is not set
# CONFIG_CIPHERS is not set
# CONFIG_DIGESTS is not set
# CONFIG_CRYPTODEV is not set
# CONFIG_CRYPTOLOOP is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_IPSEC is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CMD680 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
#
CONFIG_SCSI=y
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x_TRMS1040 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_PCI=y
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_LAN=y
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=y
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_TC35815 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
# CONFIG_ECC is not set
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_UNIX98_PTYS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_I2C_PPORT is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PROC=y
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
CONFIG_INTEL_RNG=y
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
# CONFIG_I2C_PARPORT is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_MIROPCM20_RDS is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_SUPERMOUNT is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_XATTR_SHARING=y
CONFIG_EXT3_FS_XATTR_USER=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_JFS_FS is not set
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_PROC_CONFIG is not set
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XATTR_SHARING is not set
# CONFIG_EXT2_FS_XATTR_USER is not set
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_SYSV_FS is not set
CONFIG_UDF_FS=y
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_ZISOFS_FS=y
CONFIG_FS_MBCACHE=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_IMON is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_YMFPCI_LEGACY is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_ALT=y
CONFIG_USB_OHCI=y
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
CONFIG_USB_SCANNER=m
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USBDNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
#
# Library routines
#
CONFIG_ZLIB_INFLATE=y
# CONFIG_ZLIB_DEFLATE is not set
#
# Grsecurity
#
# CONFIG_GRKERNSEC is not set |
Niko
P.S: Sorry für den langen Beitrag, aber vielleicht hilft's ja
_________________
Meine Homepage |
|
| Back to top |
|
|
seth77
n00b
Joined: 06 Mar 2003
Posts: 60
|
| Posted: Thu Mar 06, 2003 10:25 am Post subject: |
|
|
Hi
hatte das gleiche Prob. Anscheinend funzt die SCSI-Emulation im Kernel nicht richtig. Zuviel gepatcht? 
Gruß Alex |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Thu Mar 06, 2003 12:42 pm Post subject: Gepacht?? |
|
|
Hi,
naja, gepacht habe ich eigentlich gar nichts, ... 
Hilft da echt nur ein downgrade oder funzt es auch mit einer neueren Version des Kernels??
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
seth77
n00b
Joined: 06 Mar 2003
Posts: 60
|
| Posted: Thu Mar 06, 2003 12:44 pm Post subject: |
|
|
Hi
die gentoo-soucres sind ein gepatcheter vanilla-kernel, das meinte ich. mit den vanilla- oder ck-sources funzt es beispielsweise einwandfrei. gibt's nen bestimmten grund warum du die gentoo-sources nutzt?
gruß alex |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Thu Mar 06, 2003 1:05 pm Post subject: Gute Frage |
|
|
Hmm, die Frage ist gar nicht so schlecht.
Eigentlich würde mir auf die schnelle keiner einfallen, ...
Vielleicht probiere ich dann auch mal die anderen
Wie kann ich denn zwei Kernels parallel installieren (ich denke da an eine Entwicklerversion 2.5 und eine stabile Version), so wie das auch unter SuSE oder RedHat möglich ist.
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
seth77
n00b
Joined: 06 Mar 2003
Posts: 60
|
| Posted: Thu Mar 06, 2003 1:20 pm Post subject: |
|
|
Hi
du kompilierst beide kernel (denke mal du musst alles in den kernel reinkompileiren, keine module) und kopierst beide nach boot. Dann machst du zwei Einträge in Grub.conf und dann sollte das funzen. Was vermutlich dann nur mit einem der Kernel funktioniert ist der NVdriver, der wird grundsätzlich als Modul eingebunden.
Gruß alex |
|
| Back to top |
|
|
Martini
Tux's lil' helper
Joined: 30 Sep 2002
Posts: 141
|
| Posted: Thu Mar 06, 2003 1:51 pm Post subject: |
|
|
Hallo
Ich mußte genau das gleiche feststellen nach einem Wechseln von 2.4.19-r10 nach 2.4.20-r1 Gentoo-Kernel. Desweiteren ging auch komischerweise kein Framebuffer mehr mit Matrox-Karten. Das heißt, der Framebuffer funktionierte zwar, aber ich konnte die Auflösung nich mehr ändern, nur 640*480 waren möglich. Jetzt habe ich auch den vanilla-Kernel genommen und alles funzt wieder wunderbar. |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Thu Mar 06, 2003 2:51 pm Post subject: Module bei 2 Kernels?? |
|
|
Hi,
okay, das mit den beiden parallelen Kerneln und dem NVdriver Modul klingt ja recht logisch, aber wenn das genau so wäre, würde dann RedHat nicht einen Blödsinn machen, wenn es mehrere Kernel am gleichen System laufen lässt??
Wie stabil ist denn überhaupt so ein Development-Kernel??
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
awiesel
Tux's lil' helper
Joined: 30 Jun 2002
Posts: 133
|
| Posted: Thu Mar 06, 2003 4:09 pm Post subject: |
|
|
| Quote: | | CONFIG_BLK_DEV_IDECD=y |
Nimm das mal raus, idecd und ide-scsi zusammen fest im Kernel vertragen sich nicht, dann ist immer ide-cd aktiv. |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Fri Mar 07, 2003 1:17 pm Post subject: 2 CD-Rom Laufwerke |
|
|
Hi,
okay, das mag schon sein, aber muss ich dann nicht auch mein IDE-CdRom mit SCSI emulieren??
Ich wiill eigentlich nur den Brenner per SCSI emulieren und mein DVD Laufwerk mit IDE laufen lassen, ...
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Sun Mar 09, 2003 3:49 pm Post subject: Lag wirklich an den gentoo-sources |
|
|
Hi,
naja, nach langen Überlegungen habe ich nun doch die vanilla-sources installiert. Das funktioniert jetzt wirklich wieder, aber wieso das so ist, das kann ich nicht erklären 
Wie dem auch sei, es hilft halt nur ein Umstieg, allerdings fehlen da jetzt ein paar Features, oder? Ich kann zum Beispiel beim Prozessor-Typ keinen auswählen, der auf gcc >=3.2 zugeschnitten ist, so wie bei den gentoo-sources. Kostet das eigentlich viel Leistung und wenn ja, wie kann ich das ändern?
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
awiesel
Tux's lil' helper
Joined: 30 Jun 2002
Posts: 133
|
| Posted: Sun Mar 09, 2003 6:45 pm Post subject: |
|
|
Du kannst ohne Probleme sowohl das CD-R/RW als auch das DVD-Laufwerk mit der SCSI-Emulation laufen lassen. Sogar das Abspielen von DVDs macht da keine Probleme. Ausserdem kann man dann auch das DVD-Laufwerk zum Rippen benutzen, das ist bei mir z.B. schneller als der Brenner. Und bitte auch mal in die Kernel-Dokumentation schauen:
| Quote: |
If both this SCSI emulation and native ATAPI support are compiled into the kernel, the native support will be used.
|
|
|
| Back to top |
|
|
Robelix
l33t
Joined: 21 Jul 2002
Posts: 759
Location: in a World created by a Flying Spaghetti Monster
|
| Posted: Sun Mar 09, 2003 7:24 pm Post subject: |
|
|
Hast du dem Kernel auch gesagt, für welches device er ide-scsi verwenden soll?
Der Eintrag in /boot/grub/menu.lst sollte etwa so aussehen:
| Code: | title Gentoo 1.2
root(hd0,1)
kernel /boot/bzImage-2.4.19-gentoo-r9 root=/dev/hda2 hdc=ide-scsi
|
_________________
mysql> SELECT question FROM life, universe, everything WHERE answer=42;
Empty set (2079460347 sec) |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Sun Mar 09, 2003 9:06 pm Post subject: Ja |
|
|
Hi,
ja das hatte ich gemacht, ...
Wie gesagt, ich habe an der Konfiguration nichts geändert, was mit dem Brenner zu tun hatte. Auch jetzt funktioniert das ganze wieder und auch mit den selben Einstellungen.
Ich kann mir das nur durch einen Bug in den Gentoo-Sources erklären, allerdings wundert es mich dann, dass diesen Bug erst so wenige entdeckt haben (es gibt "nur" zwei Einträge im Forum, wenn man den hier mitzählt)
Dass ich mein DVD Laufwerk auch SCSI emulieren lassen kann, war mir klar, allerdings wird das dadurch entscheidend langsamer, weil man kein DMA mehr einschalten kann. Eines habe ich nicht ganz verstanden, wieso schreibt awiesel, dass | Quote: | | Ausserdem kann man dann auch das DVD-Laufwerk zum Rippen benutzen, ... |
Kannst du das nicht auch ohne SCSI-Emulation. Ich kann viel schneller rippen, wenn ich DMA einschalte, ...
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
awiesel
Tux's lil' helper
Joined: 30 Jun 2002
Posts: 133
|
| Posted: Sun Mar 09, 2003 10:20 pm Post subject: |
|
|
Was meinst Du, mit was bei mir DVD und CD-R/RW laufen? Natürlich mit UDMA und ide-scsi. Wieso sollte sich das ausschliessen? Man kann es bei Gentoo dank devfs nicht mit hdparm einstellen, aber man kann es fest in den Kernel kompilieren 
Zum rippen setzen die meisten Ripper (cdda2wav, cdparanoia) eigentlich ein Generic SCSI-Device (sg) voraus, das bekomme ich bei einem IDE-Laufwerk nur mit ide-scsi. Warum ide-scsi? Hier ein Auszug aus der FAQ von cdparanoia:
| Quote: |
Note that the native ATAPI driver is supported, but that IDE-SCSI emulation works better with ATAPI drives. This is an issue of control; the emulation interface gives cdparanoia complete control over the drive whereas the native ATAPI driver insists on hiding the device under an abstraction layer with poor error handling capabilities. Note also that a number of ATAPI drives that do not work at all with the ATAPI driver (error 006: Could not read audio) *will* work with IDE-SCSI emulation. |
Wahrscheinlich wegen dieser Geschichte waren meine über den Atapi-Driver gerippten CDs auf meinen alten (18 bzw. 15 Jahre) CD-Playern nicht zu gebrauchen. Das ist natürlich schon wieder anderthalb Jahre her, aber wenns geht dann gehts halt
Lange Rede, kurzer Sinn: Mit der SCSI-Emulation für IDE ist man beim Rippen in jedem Fall auf der sicheren Seite
Armin |
|
| Back to top |
|
|
Robelix
l33t
Joined: 21 Jul 2002
Posts: 759
Location: in a World created by a Flying Spaghetti Monster
|
| Posted: Mon Mar 10, 2003 1:51 am Post subject: |
|
|
| awiesel wrote: | Was meinst Du, mit was bei mir DVD und CD-R/RW laufen? Natürlich mit UDMA und ide-scsi. Wieso sollte sich das ausschliessen? Man kann es bei Gentoo dank devfs nicht mit hdparm einstellen, aber man kann es fest in den Kernel kompilieren
|
Es gibt da ein kleines großes Problem in den noch aktuellen ide-treibern:
DMA funzt nur mit 2^x großen Blöcken. Kein Problem mit Harddisks (meist 512B Blöcke), auch kein's mit Daten-CDs (2048B) - aber sehr wohl mit Audio-CDs (2352B pro Block). Dazu gibt es einen netten cdda-dma patch (der in den gentoo-sources dabei ist) - aber der funzt nach meiner Erfahrung nur mit ide-cd, nicht mit ide-scsi.
| Quote: |
Zum rippen setzen die meisten Ripper (cdda2wav, cdparanoia) eigentlich ein Generic SCSI-Device (sg) voraus, das bekomme ich bei einem IDE-Laufwerk nur mit ide-scsi.
|
Zumindest cdparanoia hat keinerlei troubles mit ide-cd - Wenn's Laufwerk halbwegs brauchbar ist.
Laß mal bei'm rippen einen top nebenbei laufen... und beachte besonders die % bei system.
Bei meinem Toshiba-DVD-Laufwerk:
mit ide-cd und cdda-dma-patch: 2-3%
mit ide-scsi und cdda-dma-patch: 40-60%
mit ide-cd oder ide-scsi ohne cdda-dma-patch: 40-60%
| Quote: |
Wahrscheinlich wegen dieser Geschichte waren meine über den Atapi-Driver gerippten CDs auf meinen alten (18 bzw. 15 Jahre) CD-Playern nicht zu gebrauchen. Das ist natürlich schon wieder anderthalb Jahre her, aber wenns geht dann gehts halt
|
Da glaub' ich eher d'ran, daß er CD-R's überhaupt nicht mag - oder zumindest die Rohlinge die du damals verwendet hast.
Und die Qualität des gerippten hängt wesentlich von der Qualität des Laufwerks ab. Leider sind viele der IDE-Laufwerke unter etwa 24x Speed dabei äußerst mies.
_________________
mysql> SELECT question FROM life, universe, everything WHERE answer=42;
Empty set (2079460347 sec) |
|
| Back to top |
|
|
awiesel
Tux's lil' helper
Joined: 30 Jun 2002
Posts: 133
|
| Posted: Mon Mar 10, 2003 7:39 am Post subject: |
|
|
Ich gebs ja zu, mein DVD-Laufwerk und der Writer sind nicht mehr ganz aktuell, aber mit Emulation sind die Ergebnisse gut, ohne schlicht und ergreifend schlecht. Ich habe damals mit dem DVD über Atapi gerippt, mit dem Ergebnis, dass ich viele Knack- und Knistergeräusche in den Rips hatte  , mit dem Brenner mit ide-scsi nicht. Daraufhin habe ich ide-scsi fest einkompiliert und ide-cdrom support komplett entfernt. Damit ging es dann auch mit dem DVD fehlerfrei . Das ganze sind allerdings auch Probleme, die ich mit dem vorherigen, reinen SCSI-System nicht hatte! IDE ist halt doch einfach nur billig. Mit den jetztigen Einstellungen funktionierts halt und darauf kommt es an, da kaufe ich doch keine neue Hardware ausser es geht etwas kaputt! Und da die DVD-Wiedergabe ebenfalls keine Probleme macht, gibt es für mich erstmal keinen Grund etwas zu ändern. Wenn ich mir so in einem Jahr wieder mal einen neuen Rechner zusammenstelle, werden die Experimente mit den Einstellungen wieder anfangen, aber bis dahin haben wir dann auch einen Athlon 64, 1GB Ram, 500GB Platten, bezahlbare DVD-R/RW und Kernel 2.6.x |
|
| Back to top |
|
|
benmen
n00b
Joined: 28 Aug 2002
Posts: 25
Location: Dortmund
|
| Posted: Mon Mar 10, 2003 11:44 am Post subject: Gleiches Problem. |
|
|
Hi ich hab das gleiche Problem.
Schick mal bitte jemand ne Mail zu den Dev's damit die das schnell fixen.
Gruß
Benjamin |
|
| Back to top |
|
|
dbao
n00b
Joined: 27 Feb 2003
Posts: 3
Location: Germany/Bo
|
| Posted: Mon Mar 10, 2003 2:07 pm Post subject: |
|
|
Hi
also ich habe keine Probleme mit der scsi emulation beim 2.4.20-r1 gentoo kernel!
/dev/sr0 sg0 scsi ... sind alle vorhanden ... "cdrecord --scanbus" gibt mir auch eine korrekte Ausgabe.
Kernel Ausgabe
Daniel |
|
| Back to top |
|
|
Niko_K
Guru
Joined: 19 Sep 2002
Posts: 484
Location: Rietz/Tirol
|
| Posted: Mon Mar 10, 2003 3:44 pm Post subject: Komisch |
|
|
Hi,
das ist alles doch recht komisch. Vielleicht kannst du mal den SCSI-Teil deiner Kernel Config posten, das wäre unter Umständen hilfreich (auch, wenn ich jetzt nicht mehr auf die gentoo-sources umsteigen werde)
Niko
_________________
Meine Homepage |
|
| Back to top |
|
|
dbao
n00b
Joined: 27 Feb 2003
Posts: 3
Location: Germany/Bo
|
| Posted: Mon Mar 10, 2003 4:45 pm Post subject: |
|
|
Hier Eintrag aus der config:
| Code: |
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
|
Daniel |
|
| Back to top |
|
|
benmen
n00b
Joined: 28 Aug 2002
Posts: 25
Location: Dortmund
|
| Posted: Mon Mar 10, 2003 9:00 pm Post subject: |
|
|
| ich hab die sachen alle als modul... damit geht es nicht.. |
|
| Back to top |
|
|
Reddy
n00b
Joined: 23 Jul 2002
Posts: 24
Location: Bielefeld
|
| Posted: Mon Mar 10, 2003 9:25 pm Post subject: |
|
|
| habe leider das selbe Problem. Werde jetzt mal die Vanilla-Sourcen probieren. (Hoffe es bringt was). |
|
| Back to top |
|
|
|
Deutsches Forum (German)
