View previous topic :: View next topic |
Author |
Message |
ba l33t
Joined: 25 May 2003 Posts: 804
|
Posted: Mon Dec 27, 2004 7:40 pm Post subject: 2.6.10 kernel and serial console |
|
|
I installed gentoo-dev-sources-2.6.10-r1 on E250 and now I'm unable to use serial console. All output while system boots is on console but after running agetty there is nothing.
Code: |
This is iron (Linux sparc64 2.6.10-gentoo-r1) 22:35:41
|
and system doesn't respond on serial console. With 2.6.9 it worked fine... |
|
Back to top |
|
|
nl0pvm n00b
Joined: 08 Nov 2004 Posts: 46 Location: Netherlands
|
Posted: Sat Oct 22, 2005 8:19 am Post subject: |
|
|
hi your not the only one with this problem
I thought it was my configuration or something like that.
Im runnning 2.6.13-r4 and i cannot boot kernels bigger than 3.6 Mb.
How about you? |
|
Back to top |
|
|
nl0pvm n00b
Joined: 08 Nov 2004 Posts: 46 Location: Netherlands
|
Posted: Sat Oct 22, 2005 10:56 am Post subject: |
|
|
Hi,
I solved my problem as following:
in /etc/inittab i changed this:
Code: | # SERIAL CONSOLES
#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100 |
to this:
Code: | # SERIAL CONSOLES
s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100 |
in my /etc/securetty contains also the following lines:
_________________ SUN E250 2 x UltrasparcII@400Mhz 512MB RAM 6 x 9GB Kernel 2.6.8 (SMP)
SUN E250 UltrasparcII@400Mhz 512MB RAM 2 x 9GB Kernel 2.6.11
SUN E250 UltrasparcII@400Mhz 1024MB RAM 2 x 9GB
SPARCstation 10 MP 2 x 390Z55@40Mhz 512MB RAM Kernel 2.4.30 4GB & 9GB |
|
Back to top |
|
|
|