Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Grub Error Collection [Part 1]
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4 ... 22, 23, 24  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
Hefelumpman
n00b
n00b


Joined: 28 Jan 2004
Posts: 7

PostPosted: Wed Jan 28, 2004 10:02 pm    Post subject: Error 17... Reply with quote

everytime I try to boot, I keep getting

Filesystem type unknown, partition type 0x7
Error 17 - Cannot mount selected partition

my grub.conf is set up like this...

Quote:
title=Gentoo Linux 2.6.1
root (hd1,0)
kernel (hd1,0)/boot/2.6.1-gentoo root=/dev/hdb3

title=WindowsXP
root (hd0,0)
chainloader +1


I know that the drive assignments are right - I've tried using both ext3 and reiserFS :|
also, when the bootloader screen comes up, the text is all...wrong - you can make it out, but it's like it's fuzzy :S

*uber linux n00b* - started from stage 1, compiled own kernel
any ideas?
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7212
Location: Pelotas, BR

PostPosted: Wed Jan 28, 2004 10:19 pm    Post subject: Re: Error 17... Reply with quote

Hefelumpman wrote:
everytime I try to boot, I keep getting

Filesystem type unknown, partition type 0x7
Error 17 - Cannot mount selected partition

my grub.conf is set up like this...

Quote:
title=Gentoo Linux 2.6.1
root (hd1,0)
kernel (hd1,0)/boot/2.6.1-gentoo root=/dev/hdb3

title=WindowsXP
root (hd0,0)
chainloader +1


I know that the drive assignments are right - I've tried using both ext3 and reiserFS :|
also, when the bootloader screen comes up, the text is all...wrong - you can make it out, but it's like it's fuzzy :S

*uber linux n00b* - started from stage 1, compiled own kernel
any ideas?


Partition type 0x7 is NTFS -- are you really sure that you are on the right partition and that you have ext3/reiserfs support on the kernel?

Try to use the command line from grub when booting to access your partition.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
Hefelumpman
n00b
n00b


Joined: 28 Jan 2004
Posts: 7

PostPosted: Wed Jan 28, 2004 10:25 pm    Post subject: Reply with quote

definitely on the right partition :\

the drive *used* to be ntfs when it was used by XP, but after running fdisk and deleting/adding new partitions + applying the ext3/reiserfs filesystems, it wouldn't be :|

I'll try command line in a mo
Back to top
View user's profile Send private message
Hefelumpman
n00b
n00b


Joined: 28 Jan 2004
Posts: 7

PostPosted: Wed Jan 28, 2004 10:48 pm    Post subject: Reply with quote

Hefelumpman wrote:
definitely on the right partition :\

the drive *used* to be ntfs when it was used by XP, but after running fdisk and deleting/adding new partitions + applying the ext3/reiserfs filesystems, it wouldn't be :|

I'll try command line in a mo


I got to the grub command line and typed

kernel /boot/2.1.6-gentoo
boot

and it worked fine...what's going on? workarounds are all well and good, but I'd like a working bootloader - lol :D
Back to top
View user's profile Send private message
idoneus
Apprentice
Apprentice


Joined: 26 Mar 2003
Posts: 243
Location: Graz, Austria

PostPosted: Wed Jan 28, 2004 11:11 pm    Post subject: Reply with quote

Earthwings: until now I only mentioned that bug where appropriate, but now I put it up front, since it seems lots of people are having problems with it.

dkaplowitz: It's always great to hear that.

Hefelumpman: you did not mention any root?
only kernel... and boot?
_________________
Join the adopt an unanswered post initiative today
Back to top
View user's profile Send private message
Hefelumpman
n00b
n00b


Joined: 28 Jan 2004
Posts: 7

PostPosted: Wed Jan 28, 2004 11:46 pm    Post subject: Reply with quote

only kernel and boot.

:|
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7212
Location: Pelotas, BR

PostPosted: Thu Jan 29, 2004 12:51 am    Post subject: Reply with quote

Hefelumpman wrote:
definitely on the right partition :\

the drive *used* to be ntfs when it was used by XP, but after running fdisk and deleting/adding new partitions + applying the ext3/reiserfs filesystems, it wouldn't be :|

I'll try command line in a mo


Change the partition type to Linux (0x83). Use fdisk or cfdisk or parted to dos so.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7212
Location: Pelotas, BR

PostPosted: Thu Jan 29, 2004 12:54 am    Post subject: Reply with quote

Hefelumpman wrote:
only kernel and boot.

:|


Then, just try to take root=... off from grub.conf
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7212
Location: Pelotas, BR

PostPosted: Thu Jan 29, 2004 12:56 am    Post subject: Reply with quote

pilla wrote:
Hefelumpman wrote:
definitely on the right partition :\

the drive *used* to be ntfs when it was used by XP, but after running fdisk and deleting/adding new partitions + applying the ext3/reiserfs filesystems, it wouldn't be :|

I'll try command line in a mo


Change the partition type to Linux (0x83). Use fdisk or cfdisk or parted to dos so.


Just remembered something about "ghost" windows partitions that keep showing up after being squashed and formated as linux... try to search the forums for it.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
Ardan
n00b
n00b


Joined: 06 Aug 2003
Posts: 59
Location: /dev/null

PostPosted: Thu Jan 29, 2004 6:51 pm    Post subject: Reply with quote

Okay well i've solved problems i'm having (exactly the same as everone else) on my own but I am stumped about the splash image. I've used grub on gentoo systems millions of times so I know it is going to the right location but its just the ugly non-graphical look that shows that something that *should* load is not. I heard something about certain lines being commented out in the latest ebuild of grub...is there something I can do about that or this? I'd just like to get that splash image back and I can't sit and putz on the machine anymore. People are already upset at me that I wasted my time (busy day today) reading all three pages worth of postings only to still have a quesiton.

Anyone?
Back to top
View user's profile Send private message
Earthwings
Administrator
Administrator


Joined: 14 Apr 2003
Posts: 7751
Location: Karlsruhe, Germany

PostPosted: Thu Jan 29, 2004 10:21 pm    Post subject: Reply with quote

As long as there is no new ebuild in portage, you can remerge the old version.
Code:

echo "=sys-boot/grub-0.93.20031222" >> /etc/portage/package.mask
emerge grub -p
Back to top
View user's profile Send private message
Mister Bill
n00b
n00b


Joined: 24 Jan 2004
Posts: 35
Location: Huntsville, Alabama

PostPosted: Sat Jan 31, 2004 3:12 am    Post subject: Reply with quote

Code:
 
VFS: Cannot open root device "hda7" or 03:07
Please append a correct "root=" boot option
Kernel Panic: VFS: Unable to mount root fs on 03:07


I'm getting this error, and I've confirmed that everything is as it's supposed to be in both the kernel config and grub.conf. I installed support for my ATA chipset and for ReiserFS (and left ext2 enabled), but I get that error.

I haven't done the enable MSDOS file system (or whatever it was involved DOS), but I'm not running any non-linux partitions on my hard drive? Do I still have to do that?
_________________
~WÆ
Back to top
View user's profile Send private message
idoneus
Apprentice
Apprentice


Joined: 26 Mar 2003
Posts: 243
Location: Graz, Austria

PostPosted: Sat Jan 31, 2004 11:11 am    Post subject: Reply with quote

Mister Bill: Could you post your grub.conf as well as your partition layout? Just to make sure everything is alright.

As for the dos stuff. AFAIK this is not necessary.
_________________
Join the adopt an unanswered post initiative today
Back to top
View user's profile Send private message
Earthwings
Administrator
Administrator


Joined: 14 Apr 2003
Posts: 7751
Location: Karlsruhe, Germany

PostPosted: Sat Jan 31, 2004 11:26 am    Post subject: Reply with quote

Yes, it is needed.
Code:

PC BIOS (MSDOS partition tables) support (MSDOS_PARTITION)
Say Y here if you would like to use hard disks under Linux which
were partitioned on an x86 PC (not necessarily by DOS).
Back to top
View user's profile Send private message
Mister Bill
n00b
n00b


Joined: 24 Jan 2004
Posts: 35
Location: Huntsville, Alabama

PostPosted: Sat Jan 31, 2004 8:37 pm    Post subject: Reply with quote

default 0
timeout 30
splashimage=(hd0,0)/grub/splash.xpm.gz
title=Gentoo Linux 2.6.1
root (hd0,0)
kernel (hd0,0)/kernel-2.6.1 root=/dev/hde3 vga=778

partition layout.

/dev/hde1 /boot ext2
/dev/hde2 swap
/dev/hde3 / reiserfs
_________________
~WÆ
Back to top
View user's profile Send private message
idoneus
Apprentice
Apprentice


Joined: 26 Mar 2003
Posts: 243
Location: Graz, Austria

PostPosted: Sat Jan 31, 2004 11:22 pm    Post subject: Reply with quote

Earthwings: you learn something new everyday...

Mister Bill: have you tried to recompile your kernel with the dos stuff enabled?
_________________
Join the adopt an unanswered post initiative today
Back to top
View user's profile Send private message
Mister Bill
n00b
n00b


Joined: 24 Jan 2004
Posts: 35
Location: Huntsville, Alabama

PostPosted: Sun Feb 01, 2004 12:41 am    Post subject: Reply with quote

I recompiled with the DOS stuff activated, and same error comes up. I'm sure I've installed support for ext2 and reiserfs as well.

I'm gonna go back to /etc/fstab and make sure nothing's wrong there, but I'm pretty sure I got that right too.
_________________
~WÆ
Back to top
View user's profile Send private message
Mister Bill
n00b
n00b


Joined: 24 Jan 2004
Posts: 35
Location: Huntsville, Alabama

PostPosted: Sun Feb 01, 2004 12:55 am    Post subject: Reply with quote

ok, this might be irrelevant, but here goes.

Does the number of tabs between each column in fstab really matter? Should I make sure to align them under the columns in the comment line above like I'm doing currently, or should it just be "/dev/hde1[TAB]/boot[TAB]ext2[TAB]noauto,noatime[TAB]1 2"?

Also, my current /etc/fstab reads as follows (leaving out commented lines)

Code:

/dev/hde1                  /boot           ext2      noauto,noatime     1 2
/dev/hde2                  /none          swap    sw                         0 0
/dev/hde3                  /                 reiserfs noatime                0 1
/dev/cdroms/cdrom0  /mnt/cdrom  auto      noauto,user         0 0
/dev/cdroms/cdrom1  /mnt/cdrom1 auto     noauto,user         0 0
none                         /proc /bus/usb usbfs  defaults               0 0
none                         /proc             proc     defaults               0 0
none                         /dev/shm       tmpfs   defaults               0 0

_________________
~WÆ
Back to top
View user's profile Send private message
ozbird
Apprentice
Apprentice


Joined: 21 Oct 2003
Posts: 181

PostPosted: Sun Feb 01, 2004 2:54 am    Post subject: Re: grub configuration Reply with quote

Mister Bill wrote:
default 0
timeout 30
splashimage=(hd0,0)/grub/splash.xpm.gz
title=Gentoo Linux 2.6.1
root (hd0,0)
kernel (hd0,0)/kernel-2.6.1 root=/dev/hde3 vga=778


Did you use genkernel 3.x beta to build the kernel? If so, they made some radical changes to the boot process - it caught me out.

If you emerge the new genkernel package, it will tell you the changes required; for example, my grub.conf looks like this:
Code:
default=0
timeout=10
splashimage=(hd0,1)/grub/splash.xpm.gz
#
#
title Gentoo Linux (2.6.1-gentoo-r1)
        root (hd0,1)
        kernel /kernel-2.6.1-gentoo-r1 root=/dev/ram0 init=/linuxrc real_root=/dev/hde6 hdc=ide-scsi vga=0x31b splash=verbose
        initrd /initrd-2.6.1-gentoo-r1
#
#
title Windows XP
        rootnoverify (hd0,0)
        chainloader +1
Back to top
View user's profile Send private message
Mister Bill
n00b
n00b


Joined: 24 Jan 2004
Posts: 35
Location: Huntsville, Alabama

PostPosted: Sun Feb 01, 2004 6:14 am    Post subject: Reply with quote

No, I was following the manual compile steps.
_________________
~WÆ
Back to top
View user's profile Send private message
Pergamon
Tux's lil' helper
Tux's lil' helper


Joined: 01 Feb 2004
Posts: 117

PostPosted: Sun Feb 01, 2004 2:24 pm    Post subject: Current Grub 0.93.20031222 fails on new installations+update Reply with quote

During installation of a new machine while installing Grub
Code:
setup (hd0)

fails because "emerge grub" did somehow not install the state1* files to /boot/grub.
Updating an existing machine leads to booting into Grub console.
Both can be fixed by masking this version of grub:
Code:

cd /usr/portage/profiles
nano -w package.mask
(search for grub and add the following line:)
=sys-boot/grub-0.93.20031222
(save and exit and)
emerge grub

This downgrades Grub and did fix both boxes for me.
Back to top
View user's profile Send private message
BAMacek
n00b
n00b


Joined: 27 Jan 2004
Posts: 15
Location: Waco, TX (for school, not because its a fun place to live)

PostPosted: Sun Feb 01, 2004 3:12 pm    Post subject: grub - error 15 - but configs look ok Reply with quote

I know that others have posted on the same topic, and im pretty sure ive read through every one of them, but ive been getting Error 15: File not found. So, for the sake of brevity, and because i dont feel like starting from scratch for the 12th time, I will be as specific as possible and provide ALL of the information I can think to provide. I apologise if this takes up too much room, but I have absolutely no idea what to try next.



THE ERROR
-------------

After completing the install procedure, upon reboot I get the following error:
Code:
root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel (hd0,0)/boot/bzImage root=/dev/hda3

Error 15: File not found

I'm not sure how relavent this is, but the parenthesis "(" around (hd0,0) on line 1 and 3 are messed up - the correct character is not displayed. Instead, a pixelated block character encapsulates "hd0,0".




MY SETUP
-----------

I'm trying to install Gentoo 1.4 r6 from stage 3 of the LiveCD

Here's my /etc/fstab
Code:
/dev/hda1           /boot       ext2        noauto,noatime  1 1
/dev/hda3           /           reiserfs    noatime         0 0
/dev/hda2           none        swap        sw              0 0
/dev/hdc            /mnt/cdrom  iso9660     noauto,ro,user  0 0
/dev/fd0            /mnt/floppy auto        noauto,user     0 0
...
none                /proc       proc        defaults        0 0
...
none                /dev/shm    tmpfs       defaults        0 0


Here's what's in my kernel:
Code:
Code maturity level options --->
--------------------------------
 [*] Prompt for development and/or incomplete code/drivers"

Loadable module support --->
----------------------------
 [*] Enable loadable module support
 [*]   Set version...
 [*]   Kernel module loader

Processor type and features --->
--------------------------------
 [*] Machine Check Exception

General setup --->
------------------
 [*] Networking support
 [*] PCI support
 (Any)  PCI access mode
 [*] ISA bus support
 [*] PCI device name database
 [*] System V IPC
 [*] Sysctl support
 (ELF) Kernel core
 <*> Kernel Support ~ a.out
 <*> Kernel Support ~ ELF
 <*> Kernel Support ~ MISC

Memory Technology Devices (MTD) --->
------------------------------------

Plug and Play configuration --->
--------------------------------
 <*> Plug and Play support
 <*>   ISA Plug and Play support

Block devices --->
------------------
 <*> Normal floppy disk support
 <*> RAM disk support

Enterprise Volume Management System --->
----------------------------------------

Multi-device support (RAID and LVM) --->
----------------------------------------

Cryptography support (CryptoAPT) --->
-------------------------------------

Networking options --->
-----------------------
 <*> Packet socket
 <*> Network device emulation
 <*> Unix domain sockets
 [*} TCP/IP networking
 <M> IP Security Protocol
 --- IPSec options (FreeW/WAN)
 [*]    IPSEC: IP-in-IP encapsulation
 [*]    IPSEC: Authentication Header
 [*]       HMAC-MD5 authentication algorithm
 [*]       HMAC-SHA1 authentication algorithm
 [*]    IPSEC: Encapsulation Security Payload
 [*]       3DES encryption algorithm
 [*]    IPSEC Modular Extensions
 <M>         AES encryption algorithm
 <M>         TWOFISH encryption algorithm
 <M>         SERPENT encryption algorithm
 [*]    IPSEC: IP Compression
 [*]    IPSEC Debugging Option
 [*]    IPSEC NAT-Traversal

Telephony support --->
----------------------------

ATA/IDE/MFM/RLL support --->
----------------------------
 <*> ATA/IDE/MFM/RLL support
 IDE, ATA and ATAPI Block devices --->
 -------------------------------------
  <*> Enhanced IDE/MFL/RLL disk/cdrom/tape/floppy support
  <*>   Include IDE/ATA-2 DISK support
  [*]     Use mulit-mode by default
  <*>   Include IDE/ATAPI CDROM support
  --- IDE Chipset bugfix/support
  [*]   CMD640 chipset bugfix/support
  [*]   RZ1000 chipset bugfix/support
  [*]   Generic PCI IDE chipset support
  [*]     Sharing PCI IDE interrupts support
  [*]     Generic PCI bus-master DMA support
  [*]       Use PCI DMA by default when available

SCSI support --->
-----------------

Fusion MPT device support --->
------------------------------

IEEE 1394 (Firewire) support (EXPERMINTAL) --->
-----------------------------------------------

I20 device support --->
-----------------------

Network device support --->
---------------------------
 [*] Network device support
 <M> Dummy net driver support
 Ethernet (10 or 100Mbit) --->
 -----------------------------
  [*] Ethernet (10 or 100Mbit)
  [*]   EISA, VLB, PCI and on board controllers
  <*>     RealTek RTL-8139 PCI Fast Ethernet Adapter support

Amateur Radio support --->
--------------------------

IrDA (infrared) support --->
----------------------------

ISDN subsystem --->
-------------------

Old CD-ROM drivers (not SCSI, not IDE) --->
-------------------------------------------

Input core Support --->
-----------------------
 <*> Input core support
 <*>   Keyboard support
 <*>   Mouse support
 (1024)    Horizontal screen resolution (NEW)
 (768)    Vertical screen resolution (NEW)

Character devices --->
----------------------
 [*] Virtual terminal
 [*]   Support for console on virtual terminal
 Mice --->
 ---------
  <*> Mouse Support (not serial and bus mice)
  <*> PS/2 mouse (aka "auxiliary divice") support

Multimedia devices --->
-----------------------

File systems --->
-----------------
 <*> Reiserfs support
 [*] Virtual memory file system support (former shm fs)
 <*> ISO 9660 CDROM file system support
 [*] /proc file system support
 [*] /dev file system support (EXPERIMENTAL)
 [*]   Automatically mount at boot
 <*> Second extended fs support
 Network File System --->
 ------------------------
  <*> NFS file system support
  <*> NFS server support

Console drivers --->
--------------------
 [*] VGA text console

Sound --->
----------

USB support --->
----------------

Bluetooth support --->
----------------------

Kernel hacking --->
-------------------

Library routines --->
---------------------

Grsecurity --->
---------------


Here's my /boot/grub/grub.conf
Code:
default 0
timeout 30
splashimage=(hd0,0)/boot/grub/splash.xpm.gz

title=Gentoo Linux 1.4 r6
root (hd0,0)
kernel (hd0,0)/boot/bzImage root=/dev/hda3 gentoo=notmpfs





COURSE OF ACTION:
-------------------------

The first couple of times i got this message, I thought that maybe I forgot to run "# cp /usr/src/linux/arch/i386/boot/bzImage /boot" after compiling the kernel. So I booted off the CD and ran this series of commands:
Code:
# swapon /dev/hda2

# mount /dev/hda3 /mnt/gentoo
# mount /dev/hda1 /mnt/gentoo/boot
# mount -t proc proc /mnt/gentoo/proc

# chroot /mnt/gentoo /bin/bash

# cd /usr/src/linux
just to ensure the integrity of the bzImage
# make menuconfig && make clean bzImage modules modules_install
# cp /usr/src/linux/arch/i386/boot/bzImage /boot

# exit

# umount /mnt/gentoo/proc
# umount /mnt/gentoo/boot
# umount /mnt/gentoo

# reboot

But upon reboot, I get the same message (error 15)

So then I booted off of the grub boot disk:
Code:

grub > root (hd0,0)
grub > setup (hd0)
grub > kernel (hd0,0)/boot/bzImage

Error 15: File not found


I would then boot from the CD again, mount the necessary drives, chroot into /mnt/gentoo and check the contents of /boot:
Code:
#ls /boot
bzImage   grub   lost+found


- give me a break, this makes no sense

MY CONCLUSION:
---------------------

As I am approaching my 23 hour at the helm, I am going to bed. I hope I have provided all necessary info. If I'm missing something, please let me know ASAP - I'll have it up almost immediately.


Last edited by BAMacek on Sun Feb 01, 2004 5:35 pm; edited 2 times in total
Back to top
View user's profile Send private message
idoneus
Apprentice
Apprentice


Joined: 26 Mar 2003
Posts: 243
Location: Graz, Austria

PostPosted: Sun Feb 01, 2004 3:45 pm    Post subject: Reply with quote

BAMacek: not sure if I'm stating the obvious. Your listing of /boot does not show any boot symlink. Thus kernel (hd0,0)/boot/bzImage can't be found.

Let me elaborate a little bit. On (AFAIK most) Gentoo systems there exists a boot -> ./ symbolic link on the /boot partition. Thus it does not mather if you are using a seperate boot partition, or not. You can always specify /boot/... however since your symbolic link is missing, grub can't find your boot directory.

I hope this solves your problem.
_________________
Join the adopt an unanswered post initiative today
Back to top
View user's profile Send private message
BAMacek
n00b
n00b


Joined: 27 Jan 2004
Posts: 15
Location: Waco, TX (for school, not because its a fun place to live)

PostPosted: Sun Feb 01, 2004 7:43 pm    Post subject: I do not understand Reply with quote

I tried looking around on the net and on this forum and cant figure out what you're talking about - ENTER THE SUPER NOOB.

Quote:
BAMacek: not sure if I'm stating the obvious. Your listing of /boot does not show any boot symlink. Thus kernel (hd0,0)/boot/bzImage can't be found.

Let me elaborate a little bit. On (AFAIK most) Gentoo systems there exists a boot -> ./ symbolic link on the /boot partition. Thus it does not mather if you are using a seperate boot partition, or not. You can always specify /boot/... however since your symbolic link is missing, grub can't find your boot directory.

I hope this solves your problem.


Please, explain to me which command I need to run to fix this problem and give an example. The whole symbolic link thing is pretty new to me.
Back to top
View user's profile Send private message
Earthwings
Administrator
Administrator


Joined: 14 Apr 2003
Posts: 7751
Location: Karlsruhe, Germany

PostPosted: Sun Feb 01, 2004 7:47 pm    Post subject: Re: Current Grub 0.93.20031222 fails on new installations+up Reply with quote

Pergamon wrote:
Updating an existing machine leads to booting into Grub console.
Both can be fixed by masking this version of grub:
Code:

cd /usr/portage/profiles
nano -w package.mask
(search for grub and add the following line:)
=sys-boot/grub-0.93.20031222
(save and exit and)
emerge grub

This downgrades Grub and did fix both boxes for me.

This works, but has an ugly side effect if you do an 'emerge sync' and update world. 'emerge sync' overrides package.mask in /usr/portage/profiles, so your changes get lost and the buggy version of grub gets installed again (if you don't pay attention).

a better way to do individual masking is /etc/portage/package.mask
Code:

echo "=sys-boot/grub-0.93.20031222" >> /etc/portage/package.mask
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Goto page Previous  1, 2, 3, 4 ... 22, 23, 24  Next
Page 3 of 24

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum