Hefistion Guru
Joined: 09 Feb 2003 Posts: 327 Location: España
|
Posted: Sun Feb 23, 2003 10:55 pm Post subject: ayuda con impresora usb |
|
|
Hola, estoy intentando instalar una impresora epson 480 sxu usb (es lo unico q me keda ya ) he seguido las guias doc del sitio gentoo, pero no soy capaz de configurarla, de momento en el paso en el q debo de hacer un cat "hola.txt" > /dev/usb/lp0 no hace nada. La impresora la reconoce el kernel si hag un dmesg el resultado es este:
Code: |
hub.c: USB new device connect on bus2/2, assigned device number 3
uhci.c: root-hub INT complete: port1: 588 port2: 588 data: 6
usb.c: kmalloc IF c21549c0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 3 default language ID 0x409
Manufacturer: EPSON
Product: USB Printer
SerialNumber: L84020011201217240
usb.c: unhandled interfaces on device
usb.c: USB device 3 (vend/prod 0x4b8/0x5) is not claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 04b8:0005
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 2mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 07:01:02
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 3
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: port 1, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 1 enable change, status 300
hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 2 enable change, status 300
|
en linux printing recomiendan el uso de gimp-print como filtro lo he instalado asi como gimp-print-cups pero la impresora se vuelve loca, empieza a sacar paginas en blanco hasta q la desconecto.
desde localhost:631 intento imprimir una pagina de prueba y me dice q no tengo permisos para acceder a ese recurso (habiendo entrado como root) por lo q las pruebas las haago con lp -d epson /etc/fstab
La verdad es q no se q hacer, agradeceria cualquier ayuda. |
|