View previous topic :: View next topic |
Author |
Message |
wmorris n00b
Joined: 09 Aug 2005 Posts: 3 Location: Cincinnati
|
Posted: Tue Aug 09, 2005 8:19 pm Post subject: Inconsistant Console |
|
|
When i try and load an image with SILO i get the following
boot:gentoo-2.4-smp
loading inistal ramdisk....
Inconsistent Console: input 1, output 0
Program Terminated
{0} ok
I'm tring to install gentoo on a Sunfire V210, and need help.
Thanks in advance _________________ William Morris |
|
Back to top |
|
|
gust4voz Retired Dev
Joined: 09 Sep 2003 Posts: 373 Location: Buenos Aires, Argentina
|
Posted: Tue Aug 09, 2005 10:26 pm Post subject: |
|
|
Are you trying to use LOM/ALOM?
Because you can't, you must use the real serial port for it to work (or a supported fb card). _________________ Gustavo Zacarias
Gentoo/SPARC monkey |
|
Back to top |
|
|
wmorris n00b
Joined: 09 Aug 2005 Posts: 3 Location: Cincinnati
|
Posted: Wed Aug 10, 2005 2:40 am Post subject: |
|
|
I'm not sure it's an RJ45 plug labled seriel mangment. _________________ William Morris |
|
Back to top |
|
|
gust4voz Retired Dev
Joined: 09 Sep 2003 Posts: 373 Location: Buenos Aires, Argentina
|
Posted: Wed Aug 10, 2005 12:38 pm Post subject: |
|
|
Exactly, that won't work.
Blame Sun, they don't release documentation.
You NEED to use serial A. _________________ Gustavo Zacarias
Gentoo/SPARC monkey |
|
Back to top |
|
|
wmorris n00b
Joined: 09 Aug 2005 Posts: 3 Location: Cincinnati
|
Posted: Thu Aug 11, 2005 12:21 pm Post subject: |
|
|
Forgive me for my ignorance, but do i need to change setting in openboot to use serial A. The only port i get response from is the port labeled serial management.
William _________________ William Morris |
|
Back to top |
|
|
gust4voz Retired Dev
Joined: 09 Sep 2003 Posts: 373 Location: Buenos Aires, Argentina
|
Posted: Thu Aug 11, 2005 1:29 pm Post subject: |
|
|
Yes, that's very likely, input-device and output-device to ttya i think. _________________ Gustavo Zacarias
Gentoo/SPARC monkey |
|
Back to top |
|
|
|