| View previous topic :: View next topic |
| Author |
Message |
LLuC
n00b
Joined: 18 Jul 2004
Posts: 50
Location: Barcelona, (Catalunya)
|
 Posted: Wed Jun 15, 2005 1:15 pm Post subject: [CDR] No funciona la grabadora usb (abierto) |
 |
|
Tengo una grabadora ide conuna caja usb 2.0, la reconoce perfectamente pero cuando intento grabar un cd sale esto: | Code: | Devices
-----------------------
HL-DT-ST DVDRAM GSA-4120B A102 (/dev/sr0, ) at /mnt/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R16; RAW/R96P; RAW/R96R]
TOSHIBA DVD-ROM SD-R2412 1015 (/dev/hdc, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; RAW/R96R]
System
-----------------------
K3b Version: 0.11.23
KDE Version: 3.3.2
QT Version: 3.3.4
Kernel: 2.6.11-gentoo-r9
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.11-gentoo-r9
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.32
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4120B'
Revision : 'A102'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 11750 kB/s 66x CD 8x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 116 MB
Total size: 133 MB (13:15.61) = 59671 sectors
Lout start: 134 MB (13:17/46) = 59671 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 300178
Starting to write CD/DVD at speed 40 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 0 of 116 MB written.
Track 01: 1 of 116 MB written (fifo 100%) [buf 98%] 1.4x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1079296 bytes
Writing time: 11.758s
Average write speed 68.0x.
Min drive buffer fill was 98%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 17.283s
/usr/bin/cdrecord: fifo had 81 puts and 18 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 6 times full, min fill was 90%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=40 -tao -dummy driveropts=burnfree -eject -xa -tsize=59669s -
mkisofs
-----------------------
59669
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
0.86% done, estimate finish Wed Jun 15 15:16:31 2005
1.69% done, estimate finish Wed Jun 15 15:14:37 2005
2.52% done, estimate finish Wed Jun 15 15:13:58 2005
3.37% done, estimate finish Wed Jun 15 15:13:38 2005
4.20% done, estimate finish Wed Jun 15 15:16:13 2005
|
_________________
Linux User: #357544
JabberID: lluccruset@jabber.org |
|
| Back to top |
|
 |
Sertinell
Guru
Joined: 19 May 2004
Posts: 582
|
| Posted: Wed Jun 15, 2005 1:41 pm Post subject: |
|
|
Eso es K3b ??
El error es muy posible qe provenga de CDRECORD, prueba a utilizar CDRDAO ( tienes la opcion en preferencias ).
un saludo y suerte  |
|
| Back to top |
|
|
LLuC
n00b
Joined: 18 Jul 2004
Posts: 50
Location: Barcelona, (Catalunya)
|
| Posted: Wed Jun 15, 2005 2:04 pm Post subject: |
|
|
que va, sique sin grabar nada....
| Code: | Devices
-----------------------
HL-DT-ST DVDRAM GSA-4120B A102 (/dev/sr0, ) at /mnt/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R16; RAW/R96P; RAW/R96R]
TOSHIBA DVD-ROM SD-R2412 1015 (/dev/scd1, ) at /media/cdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; RAW/R96R]
System
-----------------------
K3b Version: 0.11.23
KDE Version: 3.3.2
QT Version: 3.3.4
Kernel: 2.6.11-gentoo-r9
cdrdao
-----------------------
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
3,0,0: HL-DT-ST DVDRAM GSA-4120B Rev: A102
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)
Burning entire 79 mins disc.
Starting write simulation at speed 40...
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
?: Input/output error. : scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 180s
ERROR: Write data failed.
ERROR: Simulation failed.
cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device 3,0,0 --driver generic-mmc:0x00000010 --speed 40 --simulate --overburn -n -v 2 --force --eject --remote 12 /tmp/kde-root/k3b4poKmctoc
mkisofs
-----------------------
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
21362
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
2.40% done, estimate finish Wed Jun 15 16:04:23 2005
4.72% done, estimate finish Wed Jun 15 16:03:42 2005
7.04% done, estimate finish Wed Jun 15 16:03:28 2005
9.40% done, estimate finish Wed Jun 15 16:03:21 2005
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1 |
_________________
Linux User: #357544
JabberID: lluccruset@jabber.org |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Spanish
