| View previous topic :: View next topic |
| Author |
Message |
doublehp
Guru
Joined: 11 Apr 2005
Posts: 398
Location: FRANCE
|
 Posted: Wed Jun 08, 2005 3:10 am Post subject: [SOLVED] can not read ACPI sensors :((( |
 |
|
my computer IS ACPI compilant, since the BIOS shows up an option:
"is system ACPI compialnt"
which I ticked to YES.
I compiled my kernel with ACPI support:
| Code: | root@mercure:~# cat /usr/src/mercure_03_vs | grep ACPI
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_PNPACPI=y
# CONFIG_SERIAL_8250_ACPI is not set
|
on the following hardware:
root@mercure:/proc# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:09.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64)
0000:00:0d.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
0000:00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 11)
but the command ACPI produces the following output:
| Code: | root@mercure:/proc# acpi -V
No support for device type: thermal
|
I really do not know what to do to be able to read ACPI devices (temperature and so on ..)
Maybe the sensors lay on the SMBus, but I did not find which driver to use for that one.
| Code: | # uname -a
Linux mercure 2.6.11.10-vs2.0-rc2_mercure_03_vs #2 Tue Jun 7 18:22:27 BST 2005 i686 AMD Athlon(tm) 4 Processor AuthenticAMD GNU/Linux
|
Any idea ?
_________________
DEMAINE Benoît-Pierre (aka DoubleHP ) http://www.demaine.info/
>o_/ Coin coin coin \_o<
to contact me (MSN,ICQ, JABBER, Skype ... ) http://benoit.demaine.info/contact.png
Last edited by doublehp on Sat May 17, 2008 12:01 am; edited 2 times in total |
|
| Back to top |
|
 |
peka
l33t
Joined: 16 Mar 2005
Posts: 773
Location: Płońsk, Poland
|
| Posted: Wed Jun 08, 2005 6:45 am Post subject: |
|
|
did you try to emerge lm_sensors?
_________________
p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
| Back to top |
|
|
doublehp
Guru
Joined: 11 Apr 2005
Posts: 398
Location: FRANCE
|
| Posted: Wed Jun 08, 2005 12:01 pm Post subject: |
|
|
lm_sensor should NOT be required: I use true ACPI ... and on my laptop, I could read sensors using ONLY ACPI for 2 years, WITHOUT lm_sensors on both Debian and Gentoo, 2.4 and 2.6 ...
if the command acpi requires lm_sensor to work properly, there should be a dependency !!!
_________________
DEMAINE Benoît-Pierre (aka DoubleHP ) http://www.demaine.info/
>o_/ Coin coin coin \_o<
to contact me (MSN,ICQ, JABBER, Skype ... ) http://benoit.demaine.info/contact.png |
|
| Back to top |
|
|
doublehp
Guru
Joined: 11 Apr 2005
Posts: 398
Location: FRANCE
|
|
| Back to top |
|
|
doublehp
Guru
Joined: 11 Apr 2005
Posts: 398
Location: FRANCE
|
| Posted: Fri Jun 10, 2005 6:16 am Post subject: |
|
|
SOLVED
on my board, the sensors are not TRUE ACPI, but dedicated i2c chip ... what mean the standard command ACPI can NOT read them, but it is required to use sensord + sensor commands.
_________________
DEMAINE Benoît-Pierre (aka DoubleHP ) http://www.demaine.info/
>o_/ Coin coin coin \_o<
to contact me (MSN,ICQ, JABBER, Skype ... ) http://benoit.demaine.info/contact.png |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
