Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Via K8T800 and AGP problem (SOLVED)
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64
View previous topic :: View next topic  
Author Message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri Apr 22, 2005 2:35 am    Post subject: Via K8T800 and AGP problem (SOLVED) Reply with quote

Specs:

Nvidia driver:1.0.7174
Motherboard: MSI Neo2-F (Via K8T800 chipset)
gentoo-sources: 2.6.11-gentoo-r6

If I use agp provided by kernel, I only get 4x. The readme with the nvidia drivers says K8T800 chipsets are supported by the nvidia AGP.

So I go into make menuconfig and the under device, this is all I get for AGP features:
Code:
Ftape, the floppy tape device driver  --->
--- /dev/agpgart (AGP Support)
  < >   Intel i865 chipset support
< > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)

So it looks like kernel AGP isn't enabled.

So I make the kernel, install modules and re0emerge nvidia-kernel and when I reboot the new kernel says AGPGART from kernel is enabled so can't use NvAGP.

So I check .config in /usr/src/linux and see:
Code:
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set

So I try both, changing each to n and also commenting each line out.

I immediately run make and then check .config again and both are enabled. (y)
Something as changed the entries. Possibly another kernel option?

Any ideas for suggestions.

Yes I copied tje new kernel to /boot before rebooting :-)


Last edited by Headrush on Sat Jul 02, 2005 4:33 am; edited 1 time in total
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri Apr 22, 2005 5:00 am    Post subject: Reply with quote

Found the problem!

IOMMC must be disabled in the Processor section for the AGP options to appear and be selectable.
Back to top
View user's profile Send private message
agent_jdh
Veteran
Veteran


Joined: 08 Aug 2002
Posts: 1776
Location: Scotland

PostPosted: Fri Apr 22, 2005 11:31 am    Post subject: Reply with quote

Headrush wrote:
Found the problem!

IOMMC must be disabled in the Processor section for the AGP options to appear and be selectable.


That appears to be for x86_64 only btw.
_________________
Jingle Jangle Jewellery
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri Apr 22, 2005 1:53 pm    Post subject: Reply with quote

agent_jdh wrote:
Headrush wrote:
Found the problem!

IOMMC must be disabled in the Processor section for the AGP options to appear and be selectable.


That appears to be for x86_64 only btw.

Weird because the help mentions the K8.
Code:
CONFIG_GART_IOMMU:
  │
  │ Support the K8 IOMMU. Needed to run systems with more than 4GB of memory
  │ properly with 32-bit PCI devices that do not support DAC (Double Address
  │ Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter.
  │ Normally the kernel will take the right choice by itself.
  │ If unsure, say Y.
  │
  │ Symbol: GART_IOMMU [=n]
  │ Prompt: IOMMU support
  │   Defined at arch/x86_64/Kconfig:312
  │   Depends on: PCI
  │   Location:
  │     -> Processor type and features


After disabling kernel agp and switching to NvAGP I get symbol unresolved errors whenever I have Load "glx" in my xorg.org.
I have recompiled both nvidia-kernel and nvidia-glx and run opengl-update nvidia.

So I'm staying with the kernel AGP, seems fast enough, but I'm unable to set 8x transfers. If I compile agp and amd64_agp as modules is there an option I can pass to modprobe to start at 8x?
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Thu May 12, 2005 5:47 pm    Post subject: Reply with quote

Can someone with a K8T800PRO chipset based motherboard post their output from lspci?

This is the VIA based chipset for Athlon 64s, the PRO chipset.
Back to top
View user's profile Send private message
plastikman187
Apprentice
Apprentice


Joined: 15 Mar 2005
Posts: 233

PostPosted: Thu May 12, 2005 11:46 pm    Post subject: Reply with quote

I do not have the Pro version here is the non pro
Code:

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit Ethernet Controller (rev 13)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]
0000:01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri May 13, 2005 12:30 am    Post subject: Reply with quote

Looking for K8T800 PRO, not K8T800. Anyone?
Back to top
View user's profile Send private message
prymitive
Apprentice
Apprentice


Joined: 13 Jun 2004
Posts: 260

PostPosted: Fri May 13, 2005 3:39 pm    Post subject: Reply with quote

Headrush wrote:
Looking for K8T800 PRO, not K8T800. Anyone?


MSI K8T Neo2-F (K8T800PRO):
Code:

gremlin prymitive # lspci -v
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0282
        Subsystem: VIA Technologies, Inc.: Unknown device 3282
        Flags: bus master, 66Mhz, medium devsel, latency 8
        Memory at d0000000 (32-bit, prefetchable)
        Capabilities: [80] AGP version 3.0
        Capabilities: [50] Power Management version 2
        Capabilities: [60] #08 [0060]
        Capabilities: [58] #08 [8001]

0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1282
        Flags: bus master, medium devsel, latency 0

0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2282
        Flags: bus master, medium devsel, latency 0

0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
        Flags: bus master, medium devsel, latency 0

0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
        Flags: bus master, medium devsel, latency 0

0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
        Flags: bus master, medium devsel, latency 0

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South] (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: cbe00000-cfefffff
        Prefetchable memory behind bridge: abd00000-cbcfffff
        Secondary status: SERR
        Capabilities: [80] Power Management version 2

0000:00:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
        Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
        Flags: bus master, slow devsel, latency 64, IRQ 185
        I/O ports at e800
        Capabilities: [dc] Power Management version 1

0000:00:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
        Subsystem: Creative Labs: Unknown device 100a
        Flags: bus master, medium devsel, latency 64, IRQ 177
        I/O ports at e400
        Capabilities: [dc] Power Management version 1

0000:00:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
        Subsystem: Creative Labs Gameport Joystick
        Flags: bus master, medium devsel, latency 64
        I/O ports at ec00
        Capabilities: [dc] Power Management version 1

0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at d400 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at e000 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 193
        Memory at cffffe00 (32-bit, non-prefetchable)
        Capabilities: [80] Power Management version 2

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800 South]
        Subsystem: VIA Technologies, Inc. DFI KT600-AL Motherboard
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] #08 [2101]

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2) (prog-if 00 [VGA])
        Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 201
        Memory at ce000000 (32-bit, non-prefetchable) [size=cfee0000]
        Memory at b0000000 (32-bit, prefetchable) [size=256M]
        Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0


can't get AGP8X btw.
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri May 13, 2005 3:44 pm    Post subject: Reply with quote

Thank you prymitive.
I have the same board and the same output and the problem with 8x AGP.

Someone tried telling me it was because I misconfigured my kernel, but I didn't think so.
Back to top
View user's profile Send private message
prymitive
Apprentice
Apprentice


Joined: 13 Jun 2004
Posts: 260

PostPosted: Fri May 13, 2005 3:57 pm    Post subject: Reply with quote

Headrush wrote:
Thank you prymitive.
I have the same board and the same output and the problem with 8x AGP.

Someone tried telling me it was because I misconfigured my kernel, but I didn't think so.


are You getting the same messages in Your logs?
Code:
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: X passes broken AGP3 flags (1f00000c). Fixed.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: X passes broken AGP3 flags (1f00000c). Fixed.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode


I googled for those errors and I found few threads whit this problem, it's not just K8T800 problem
http://lkml.org/lkml/2005/3/10/306
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri May 13, 2005 9:05 pm    Post subject: Reply with quote

I have an identical output.

I'll look into that patch. Seems the date of message is Mar 2005, but not sure about the reference to linux-2.5.
I'll try it out anyways and see how it goes.
Back to top
View user's profile Send private message
Big Jim Slade
Apprentice
Apprentice


Joined: 04 May 2005
Posts: 197
Location: Washington State

PostPosted: Sat May 14, 2005 1:10 am    Post subject: Reply with quote

I have the ASUS A8V Deluxe (K8T800 PRO) and I get 8x AGP us AGPGART and AMD64_AGP (not NvAGP) according to dmesg... can't post my lspci output at the moment, but perhaps there's something specific that you are looking for that I can check? Let me know and/or I'll post my lspci later tonight
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Sat May 14, 2005 10:25 pm    Post subject: Reply with quote

It just seems that this board (Neo2-F) isn't properly identifying the north bridge chipset. (At least not yet)
Back to top
View user's profile Send private message
Big Jim Slade
Apprentice
Apprentice


Joined: 04 May 2005
Posts: 197
Location: Washington State

PostPosted: Sun May 15, 2005 8:14 am    Post subject: Reply with quote

Here's my lspci output -- verbose and non -- in case it's of any help

Code:
deepthought linux # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
0000:00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:00:08.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
0000:00:0c.0 Multimedia controller: Philips Semiconductors SAA713X Audio+video broadcast decoder (rev 10)
0000:00:0e.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:00:0e.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
0000:00:0e.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 GT] (rev a1)


Code:
deepthought linux # lspci -v
0000:00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Subsystem: ASUSTeK Computer Inc.: Unknown device 80a3
        Flags: bus master, 66Mhz, medium devsel, latency 64
        Memory at d8000000 (32-bit, prefetchable)
        Capabilities: [80] AGP version 3.0
        Capabilities: [50] Power Management version 2
        Capabilities: [60] #08 [0060]
        Capabilities: [58] #08 [8001]

0000:00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

0000:00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

0000:00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

0000:00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

0000:00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: f9f00000-fbffffff
        Prefetchable memory behind bridge: e0000000-f8ffffff
        Capabilities: [80] Power Management version 2

0000:00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc.: Unknown device 808a
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at f9500000 (32-bit, non-prefetchable)
        I/O ports at 9800 [size=128]
        Capabilities: [50] Power Management version 2

0000:00:08.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)
        Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe motherboard
        Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 5
        I/O ports at a800
        I/O ports at a400 [size=16]
        I/O ports at a000 [size=128]
        Memory at f9700000 (32-bit, non-prefetchable) [size=4K]
        Memory at f9600000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: [60] Power Management version 2

0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
        Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 17
        Memory at f9900000 (32-bit, non-prefetchable) [size=f9800000]
        I/O ports at b000 [size=256]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data

0000:00:0c.0 Multimedia controller: Philips Semiconductors SAA713X Audio+video broadcast decoder (rev 10)
        Subsystem: Unknown device 185b:c100
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at f9a00000 (32-bit, non-prefetchable)
        Capabilities: [40] Power Management version 2

0000:00:0e.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
        Subsystem: Creative Labs: Unknown device 1002
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at b400
        Capabilities: [dc] Power Management version 2

0000:00:0e.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
        Subsystem: Creative Labs: Unknown device 0060
        Flags: bus master, medium devsel, latency 64
        I/O ports at b800
        Capabilities: [dc] Power Management version 2

0000:00:0e.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) (prog-if 10 [OHCI])
        Subsystem: Creative Labs SB Audigy FireWire Port
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at f9c00000 (32-bit, non-prefetchable)
        Memory at f9b00000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 20
        I/O ports at d800
        I/O ports at d400 [size=4]
        I/O ports at d000 [size=8]
        I/O ports at c800 [size=4]
        I/O ports at c400 [size=16]
        I/O ports at c000 [size=256]
        Capabilities: [c0] Power Management version 2

0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at e000 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at e400 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at e800 [size=32]
        Capabilities: [80] Power Management version 2

0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        Memory at f9e00000 (32-bit, non-prefetchable)
        Capabilities: [80] Power Management version 2

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
        Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] #08 [2101]

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 GT] (rev a1) (prog-if 00 [VGA])
        Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
        Memory at fb000000 (32-bit, non-prefetchable) [size=f9f00000]
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Tue May 17, 2005 7:01 am    Post subject: Reply with quote

Similar output to both prymitive and myself. I'm at a lose as to why 8x isn't working.
Back to top
View user's profile Send private message
ackward
Apprentice
Apprentice


Joined: 06 Sep 2002
Posts: 192

PostPosted: Tue May 17, 2005 7:36 am    Post subject: Reply with quote

Big Jim Slade wrote:
I have the ASUS A8V Deluxe (K8T800 PRO) and I get 8x AGP us AGPGART and AMD64_AGP (not NvAGP) according to dmesg... can't post my lspci output at the moment, but perhaps there's something specific that you are looking for that I can check? Let me know and/or I'll post my lspci later tonight


Same board and same configuration. latest nvidia drivers and using kernel agpgart (nvidia agp driver gives me worse performance). 8X and playing wow better than in windows.
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Tue May 17, 2005 8:19 am    Post subject: Reply with quote

To fix the unknown entries in lspci, just run this as root
Code:
update-pciids

That's assuming you have pciutils emerged.

This will update the pci device database to the latest version which has K8T800 Pro support.

Still searching for AGP 8x fix :?
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Thu Jun 16, 2005 8:54 pm    Post subject: Reply with quote

Still have this problem.

dmesg:
Code:
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: X passes broken AGP3 flags (1f00021c). Fixed.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: X passes broken AGP3 flags (1f00021c). Fixed.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode

cat /proc/drivers/nvidia/agp/card:
Code:
Fast Writes:     Supported
SBA:             Supported
AGP Rates:       8x 4x
Registers:       0x1f000e1b:0x1f000311

cat /proc/drivers/nvidia/agp/host-bridge
Code:
Host Bridge:     PCI device 1106:0282 (VIA Technologies, Inc.)
Fast Writes:     Supported
SBA:             Supported
AGP Rates:       8x 4x
Registers:       0x1f000a1f:0x00000b11

Revelevant section of /var/log/Xorg.0.log
Code:
(**) NVIDIA(0): Use of AGPGART requested
(--) NVIDIA(0): Linear framebuffer at 0xC0000000
(--) NVIDIA(0): MMIO registers at 0xCE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5900
(--) NVIDIA(0): VideoBIOS: 04.35.20.36.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): DFP-0: maximum pixel clock: 165 MHz
(--) NVIDIA(0): DFP-0: External Dual Link TMDS
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Sat Jul 02, 2005 4:34 am    Post subject: Reply with quote

MSI just released BIOS V9.1 that fixes the 8x AGP issue and adds support for dual core Athlon 64s.
Back to top
View user's profile Send private message
prymitive
Apprentice
Apprentice


Joined: 13 Jun 2004
Posts: 260

PostPosted: Sat Jul 02, 2005 9:47 am    Post subject: Reply with quote

Headrush wrote:
MSI just released BIOS V9.1 that fixes the 8x AGP issue and adds support for dual core Athlon 64s.


And seems to break cool'nquiet. ;)
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Sat Jul 02, 2005 12:47 pm    Post subject: Reply with quote

prymitive wrote:
Headrush wrote:
MSI just released BIOS V9.1 that fixes the 8x AGP issue and adds support for dual core Athlon 64s.


And seems to break cool'nquiet. ;)

Updating to this version resets the BIOS values, hence why they say to save your values.
You have to enable Cool N' Quiet in the BIOS again, among other things.
Back to top
View user's profile Send private message
prymitive
Apprentice
Apprentice


Joined: 13 Jun 2004
Posts: 260

PostPosted: Sat Jul 02, 2005 1:11 pm    Post subject: Reply with quote

Headrush wrote:
prymitive wrote:
Headrush wrote:
MSI just released BIOS V9.1 that fixes the 8x AGP issue and adds support for dual core Athlon 64s.


And seems to break cool'nquiet. ;)

Updating to this version resets the BIOS values, hence why they say to save your values.
You have to enable Cool N' Quiet in the BIOS again, among other things.


I know, but after upgrading bios and resetting it my system lock's up after boot, disabling cool'n'quiet fixed it, I said it "seems" becouse it's maybe something else broken that couses cool'n'quiet to lock my system, I didn't had time to play eith that.
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Sat Jul 02, 2005 1:36 pm    Post subject: Reply with quote

prymitive wrote:
I know, but after upgrading bios and resetting it my system lock's up after boot, disabling cool'n'quiet fixed it, I said it "seems" becouse it's maybe something else broken that couses cool'n'quiet to lock my system, I didn't had time to play eith that.

Well, just for reference Cool N' Quiet works perfectly here with the V9.1 BIOS. Good Luck.
Back to top
View user's profile Send private message
prymitive
Apprentice
Apprentice


Joined: 13 Jun 2004
Posts: 260

PostPosted: Sat Jul 02, 2005 3:09 pm    Post subject: Reply with quote

Headrush wrote:
prymitive wrote:
I know, but after upgrading bios and resetting it my system lock's up after boot, disabling cool'n'quiet fixed it, I said it "seems" becouse it's maybe something else broken that couses cool'n'quiet to lock my system, I didn't had time to play eith that.

Well, just for reference Cool N' Quiet works perfectly here with the V9.1 BIOS. Good Luck.


Cool'n'quiet freezes my systems (gentoo and winxp) and makes my floppy wan't to read something ;) and also it made my lm_sensors show only eeprom data, I can read them in windows without problems. Does Your lm_sensors are working?
Back to top
View user's profile Send private message
crazycat
l33t
l33t


Joined: 26 Aug 2003
Posts: 838
Location: Hamburg, Germany

PostPosted: Sat Jul 02, 2005 4:11 pm    Post subject: Reply with quote

What are exact steps which make your system freeze? Check if you compiled it in kernel and if you can read temperature data from /sys filesystem.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64 All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum