Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Linux on UltraSparc III+ SunFire 280R
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Sparc
View previous topic :: View next topic  
Author Message
bartaj
n00b
n00b


Joined: 18 Apr 2005
Posts: 10
Location: Europe/Hungary

PostPosted: Mon Apr 18, 2005 2:48 pm    Post subject: Linux on UltraSparc III+ SunFire 280R Reply with quote

Hello!

I have a problem with the Gentoo install (sparc64 -> 2005.0/).
I tried to install it on the SunFire 280R (with ultrasparcIII+ proc) hw, but it didn't work.

Can You help me?[/b]
Thanks,
Jani

boot: gentoo-2.4-smp
Loading initial ramdisk....

bootmem_init: Scan sp_banks, init_bootmem(min[0], bootmap[1fc], max[3ff79])
free_bootmem(sp_banks:0): base[0] size[7effe000]
free_bootmem(sp_banks:1): base[7f000000] size[ef2000]
reserve_bootmem(initrd): base[7fdee000] size[e53c9]
reserve_bootmem(initrd): base[7fdee000] size[7fed33c9]
reserve_bootmem(kernel): base[0] size[3f6e90]
reserve_bootmem(bootmap): base[3f8000] size[7ff0]
Remapping the kernel... done.
Booting Linux...
mem_init: Calling free_all_bootmem().
Starting CPU 1... OK
PROMLIB: Sun IEEE Boot Prom 4.5.10 2002/02/11 10:39
Linux version 2.4.29-sparc-smp (root@ayanami) (gcc version 3.3.5 (Gentoo Linux 3.3.5)) #1 SMP Tue Mar 15 18:31:17 UTC 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:16:bf:64
On node 0 totalpages: 261381
zone(0): 262009 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f006e2f0,mid=0)
Found CPU 1 (node=f006ec58,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/livecd.squashfs noudev devfs cdroot
Calibrating delay loop... 79.87 BogoMIPS
Memory: 2066416k available (2136k kernel code, 704k data, 176k init) [fffff80000000000,000000007fef2000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 131072 (order: 8, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
POSIX conformance testing by UNIFIX
Entering UltraSMPenguin Mode...
Calibrating delay loop... 599.65 BogoMIPS
Total of 2 processors activated (679.52 BogoMIPS).
CPU 1: synchronized TICK with master CPU (last diff 0 cycles,maxerr 5 cycles)
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: Probing for controllers.
SCHIZO0 PBMB: ver[5:0], portid 8, cregs[40004400000] pregs[40004700000]
SCHIZO0 PBMB: PCI CFG[7ffee000000] IO[7ffef000000] MEM[7fe00000000]
SCHIZO0 PBMA: ver[5:0], portid 8, cregs[40004400000] pregs[40004600000]
SCHIZO0 PBMA: PCI CFG[7ffec000000] IO[7ffed000000] MEM[7fd00000000]
PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1d]
PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1f]
PCI-IRQ: Routing bus[ 0] slot[ 6] map[0] to INO[18]
PCI-IRQ: Routing bus[ 0] slot[ 6] map[0] to INO[19]
PCI0(PBMB): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[00]
PCI-IRQ: Routing bus[ 1] slot[ 4] map[0] to INO[04]
PCI0(PBMA): Bus running at 33MHz
ebus0: [flashprom] [bbc] [power] [i2c -> (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (nvram) (idprom)] [i2c -> (cpu-fru) (temperature) (cpu-fru) (temperature) (fan-control) (motherboard-fru) (ioexp) (ioexp) (ioexp) (fcal-backplane) (remote-system-console) (power-distribution-board) (power-supply) (power-supply) (rscrtc)] [beep] [rtc] [gpio] [pmc] [parallel] [rsc-control] [rsc-console] [serial]
SAB82532 serial driver version 1.65
ttyS00 at 0x7fe7e400000 (irq = 12,222) is a SAB82532 V3.2
ttyS01 at 0x7fe7e400040 (irq = 12,222) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000007fe7e30002e ... not using powerd.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
chmc0: US3 memory controller at 0000040000400000 [ACTIVE]
chmc1: US3 memory controller at 0000040000c00000 [INACTIVE]
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
ERROR(1): Cheetah error trap taken afsr[0010080000000000] afar[000007ffed0003c0] TL1(0)
ERROR(1): TPC[0000000000538800] TNPC[0000000000538804] TSTATE[0000001180009603]
ERROR(1): M_SYND(0), E_SYND(0), Privileged
ERROR(1): Highest priority error (0000080000000000) "Bus error response from system bus"
ERROR(1): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000]
ERROR(1): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
ERROR(1): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[0000000000000000]
ERROR(1): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000]
ERROR(1): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000]
ERROR(1): E-cache idx[ed0003c0] tag[0000000001000000]
ERROR(1): E-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
Kernel panic: Irrecoverable deferred error trap.

Press L1-A to return to the boot prom
[b]
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Sparc All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum