Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Ati 9600 mobile pro @ 1680x1050, 3d support
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
fabi@allstuff.de
Tux's lil' helper
Tux's lil' helper


Joined: 14 Feb 2005
Posts: 140

PostPosted: Wed Apr 06, 2005 5:45 pm    Post subject: Ati 9600 mobile pro @ 1680x1050, 3d support Reply with quote

Hallo,
Versuche gerade unter meinem Dell Inspiron 8600, Auflösung 1680x1050, den Ati- Treiber zum laufen zu bringen.
Ein Xorg config habe ich im Internet gefunden, leider weiß ich nicht, wie ich sie einbinden soll, und wo.
_________________
Mit freundlichen Grüßen,
Fabi
Back to top
View user's profile Send private message
gordon001
n00b
n00b


Joined: 28 Mar 2005
Posts: 18
Location: Bremen

PostPosted: Wed Apr 06, 2005 10:34 pm    Post subject: Reply with quote

hi,
wenn die xorg.conf sonst auch stimmig ist, leg' die unter /etc/x11/xorg.conf ab.

hast du die auflösung auch in deinem framebuffer ? wenn ja, ich suche schon länger ein
vga-statement, mit dem ich eine 1440x900 res auf meinen framebuffer münzen kann.
hast du einen tip?

gruss gordon
Back to top
View user's profile Send private message
fabi@allstuff.de
Tux's lil' helper
Tux's lil' helper


Joined: 14 Feb 2005
Posts: 140

PostPosted: Thu Apr 07, 2005 11:42 am    Post subject: Reply with quote

Danke für die Anwort.
_________________
Mit freundlichen Grüßen,
Fabi


Last edited by fabi@allstuff.de on Thu Apr 07, 2005 7:30 pm; edited 1 time in total
Back to top
View user's profile Send private message
Roller
Tux's lil' helper
Tux's lil' helper


Joined: 22 Jan 2005
Posts: 114
Location: Esslingen/Germany

PostPosted: Thu Apr 07, 2005 11:51 am    Post subject: Reply with quote

Hallo,
hast du dir das schon mal durchgelesen?
Das hat mir geholfen. Ich habe hier ein HP nx7000 mit dieser Auflösung, 3D und den aktuellen ATI-Treibern laufen. Allerdings habe ich eine Radeon 9200.
Back to top
View user's profile Send private message
toralf
Advocate
Advocate


Joined: 01 Feb 2004
Posts: 2713
Location: Hamburg/Germany

PostPosted: Thu Apr 07, 2005 2:12 pm    Post subject: Reply with quote

Die hier funktioniert mit x11-base/xorg-x11-6.8.2-r1:
Code:

nhh221 ~ # cat /etc/X11/xorg.conf
Section "dri"
    Mode 0666
EndSection

Section "Module"
        Load  "record"
        Load  "extmod"
        Load  "dbe"
        Load  "dri"
        Load  "xtrap"
        Load  "glx"
        Load  "freetype"
        Load  "type1"
EndSection

Section "Files"
        RgbPath "/usr/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"

        FontPath        "unix/:-1"
EndSection

Section "ServerFlags"
        Option      "blank time"    "10"    # 10 minutes
        Option      "standby time"  "15"
        Option      "suspend time"  "20"
        Option      "off time"      "25
        Option "AllowMouseOpenFail"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option "XkbModel"       "pc105"
        Option "XkbLayout"      "de"
        Option "XkbVariant"     "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/misc/psaux"
        Option      "Emulate3Buttons"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "ImPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZaxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        DisplaySize   330 206 # mm
        VendorName   "SEC"
        ModelName    "3150"
        HorizSync    28.0 - 96.0
        VertRefresh  50.0 - 75.0
        Option       "DPMS" "true"
EndSection

Section "Device"
        Identifier  "Device0"
        Driver      "ati"
        VendorName  "ATI Technologies Inc"
        BoardName   "RV350 [Mobility Radeon 9600 M10]"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier  "Screen0"
        Device      "Device0"
        Monitor     "Monitor0"
        DefaultDepth 24

        SubSection "Display"
                Viewport   0 0
                Depth     1
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     4
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     8
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     15
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier     "Server Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0"      "CorePointer"
        InputDevice    "Mouse1"     "SendCoreEvents"
        InputDevice    "Keyboard0"   "CoreKeyboard"
EndSection


### EOF ###


Und hier das diff für die at-driver:
Code:

nhh221 ~ # diff /etc/X11/xorg.conf.fglrx /etc/X11/xorg.conf
6,7c6,7
<       #Load  "record"
<       #Load  "extmod"
---
>       Load  "record"
>       Load  "extmod"
9,11d8
<       SubSection  "extmod"
<               Option    "omit xfree86-dga"   # don't initialise the DGA extension
<       EndSubSection
13c10
<       #Load  "xtrap"
---
>       Load  "xtrap"
31c28
<       Option      "AllowMouseOpenFail"
---
>       Option "AllowMouseOpenFail"
70c67
<       Driver      "fglrx"
---
>       Driver      "ati"
127,129d123
< #Section "Extensions"
< #     Option "Composite" "True"
< #EndSection
Back to top
View user's profile Send private message
fabi@allstuff.de
Tux's lil' helper
Tux's lil' helper


Joined: 14 Feb 2005
Posts: 140

PostPosted: Thu Apr 07, 2005 2:44 pm    Post subject: Reply with quote

ok, vielen Dank. So etwas habe ich gesucht.
Leider weiß ich nicht, was ich mit deiner 2. Conf Datei machen soll?
_________________
Mit freundlichen Grüßen,
Fabi
Back to top
View user's profile Send private message
toralf
Advocate
Advocate


Joined: 01 Feb 2004
Posts: 2713
Location: Hamburg/Germany

PostPosted: Thu Apr 07, 2005 3:18 pm    Post subject: Reply with quote

Ok, hier die vollständige Datei. Dazu mußt Du aber ati-drivers* emergen und 'opengl-update ati' ausführen.

Code:

nhh221 ~ # cat /etc/X11/xorg.conf.fglrx
Section "dri"
    Mode 0666
EndSection

Section "Module"
        #Load  "record"
        #Load  "extmod"
        Load  "dbe"
        SubSection  "extmod"
                Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
        Load  "dri"
        #Load  "xtrap"
        Load  "glx"
        Load  "freetype"
        Load  "type1"
EndSection

Section "Files"
        RgbPath "/usr/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"

        FontPath        "unix/:-1"
EndSection

Section "ServerFlags"
        Option      "blank time"    "10"    # 10 minutes
        Option      "standby time"  "15"
        Option      "suspend time"  "20"
        Option      "off time"      "25
        Option      "AllowMouseOpenFail"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option "XkbModel"       "pc105"
        Option "XkbLayout"      "de"
        Option "XkbVariant"     "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/misc/psaux"
        Option      "Emulate3Buttons"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "ImPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZaxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        DisplaySize   330 206 # mm
        VendorName   "SEC"
        ModelName    "3150"
        HorizSync    28.0 - 96.0
        VertRefresh  50.0 - 75.0
        Option       "DPMS" "true"
EndSection

Section "Device"
        Identifier  "Device0"
        Driver      "fglrx"
        VendorName  "ATI Technologies Inc"
        BoardName   "RV350 [Mobility Radeon 9600 M10]"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier  "Screen0"
        Device      "Device0"
        Monitor     "Monitor0"
        DefaultDepth 24

        SubSection "Display"
                Viewport   0 0
                Depth     1
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     4
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     8
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     15
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes     "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier     "Server Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0"      "CorePointer"
        InputDevice    "Mouse1"     "SendCoreEvents"
        InputDevice    "Keyboard0"   "CoreKeyboard"
EndSection

#Section "Extensions"
#       Option "Composite" "True"
#EndSection

### EOF ###

Back to top
View user's profile Send private message
fabi@allstuff.de
Tux's lil' helper
Tux's lil' helper


Joined: 14 Feb 2005
Posts: 140

PostPosted: Thu Apr 07, 2005 4:51 pm    Post subject: Reply with quote

Habe es endlich geschafft,die ati treiber zu installieren.
Aber anscheinend wird nicht geladen: dmesg gibt aus:

Linux agpgart interface v0.100 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERM ANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[fglrx:firegl_stub_register] *ERROR* Unable to the open some already present DRM kernel module!

Kann mir da jemand weiterhelfen?
_________________
Mit freundlichen Grüßen,
Fabi
Back to top
View user's profile Send private message
fabi@allstuff.de
Tux's lil' helper
Tux's lil' helper


Joined: 14 Feb 2005
Posts: 140

PostPosted: Thu Apr 07, 2005 5:24 pm    Post subject: Reply with quote

Es hilft vielleicht weiter: Meine jetztige Xorg.conf

Section "dri"
Mode 0666
EndSection

Section "Module"

Load "dbe" # Double buffer extension

SubSection "extmod"

EndSubSection


Load "type1"
Load "freetype"


Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection


Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

Section "ServerFlags"


EndSection


Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "dell101"
Option "XkbLayout" "de"

EndSection


Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "GlidePointPS/2"
Option "Device" "/dev/input/mice"

EndSection

Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
Option "DPMS"


EndSection


Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"



Driver "vga"

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e50
Screen 0
EndSection


Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

Section "ServerLayout"

Identifier "Server Layout"

Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
_________________
Mit freundlichen Grüßen,
Fabi
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum