Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Install Gentoo on Sun Fire v240 problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Sparc
View previous topic :: View next topic  
Author Message
yuzan
n00b
n00b


Joined: 15 Apr 2004
Posts: 4

PostPosted: Thu Apr 15, 2004 7:58 am    Post subject: Install Gentoo on Sun Fire v240 problem Reply with quote

Hi

I try install gentoo on Sun Fire v240,but have some problem.

I use LiveCD 2004.0 boot and install GRP is fine.

But,when I use "free" show the the memory size it has wrong.

The RAM total 2048MB on the machine.

When use "free" show total Memory should be 20xxxxx ,but just see total 12xxxxx.

Then I try compile and install kernel (vanilla-sources 2.4.25).....complete.

Reboot.

see SILO.

Load kernel.

see "Remapping the kernel.....done" message.

.......then it is hang.


Have anyone successful install gentoo on the Sun Fire v240 ?
Back to top
View user's profile Send private message
Weeve
Retired Dev
Retired Dev


Joined: 30 Oct 2002
Posts: 641

PostPosted: Thu Apr 15, 2004 3:26 pm    Post subject: Reply with quote

Hrm, I'm not sure as to why Linux doesn't see all of the RAM in your machine. When you get your machine up, post the output of dmesg and perhaps we'll see something.

As for not being able to boot, are you using the serial console or do you have a monitor hooked up to the machine?
Back to top
View user's profile Send private message
yuzan
n00b
n00b


Joined: 15 Apr 2004
Posts: 4

PostPosted: Fri Apr 16, 2004 9:34 am    Post subject: Reply with quote

Thanks for your response.

I direct use the LiveCD kernel.

When booting.....

serial console
Code:

boot: gentoo-2.4.24
Allocated 8 Megs of memory at 0x40000000 for kernel
Kernel doesn't support loading to high memory, relocating...done.
Loaded kernel version 2.4.24
.....
.....then it can boot into system.


Below is dmesg content.
Code:

PROMLIB: Sun IEEE Boot Prom 4.11.4 2003/07/23 08:04
Linux version 2.4.24-sparc-r2-smp (root@ayanami) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 @PV@)) #1 SMP Thu Feb 26 14:45:24 Local time zone must be set--see zic
ARCH: SUN4U
Ethernet address: 00:03:ba:58:2e:1d
On node 0 totalpages: 261209
zone(0): 8519519 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f0063280,mid=0)
Found CPU 1 (node=f0063b98,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/sda4
Console: colour dummy device 80x25
Calibrating delay loop... 666.82 BogoMIPS
Memory: 1290808k available (2248k kernel code, 568k data, 176k init) [fffff80000000000,000000103febe000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 131072 (order: 8, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
POSIX conformance testing by UNIFIX
Entering UltraSMPenguin Mode...
Calibrating delay loop... 666.82 BogoMIPS
Total of 2 processors activated (1333.65 BogoMIPS).
CPU 0: synchronized TICK with master CPU (last diff 1 cycles,maxerr 6 cycles)
Waiting on wait_init_idle (map = 0x1)
All processors have done init_idle
PCI: Probing for controllers.
TOMATILLO0 PBMB: ver[4:0], portid 1f, cregs[4000fc00000] pregs[4000ff00000]
TOMATILLO0 PBMB: PCI CFG[7f600000000] IO[7f601000000] MEM[7f700000000]
TOMATILLO0 PBMA: ver[4:0], portid 1e, cregs[4000f400000] pregs[4000f600000]
TOMATILLO0 PBMA: PCI CFG[7fe00000000] IO[7fe01000000] MEM[7ff00000000]
TOMATILLO1 PBMA: ver[4:0], portid 1c, cregs[4000e400000] pregs[4000e600000]
TOMATILLO1 PBMA: PCI CFG[7ce00000000] IO[7ce01000000] MEM[7cf00000000]
TOMATILLO1 PBMB: ver[4:0], portid 1d, cregs[4000ec00000] pregs[4000ef00000]
TOMATILLO1 PBMB: PCI CFG[7c600000000] IO[7c601000000] MEM[7c700000000]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1d]
PCI1(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[29]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[28]
PCI1(PBMA): Bus running at 66MHz
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[08]
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[09]
PCI0(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 3] slot[ 3] map[0] to INO[0c]
PCI-IRQ: Routing bus[ 3] slot[ a] map[0] to INO[27]
PCI-IRQ: Routing bus[ 3] slot[ d] map[0] to INO[18]
PCI0(PBMA): Bus running at 33MHz
isa0: [flashprom] [rtc] [i2c -> (i2c-bridge) (i2c-bridge) (motherboard-fru-prom) (chassis-fru-prom) (power-supply-fru-prom) (power-supply-fru-prom) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (rscrtc) (nvram) (idprom) (gpio) (gpio) (gpio) (gpio) (gpio) (gpio)] [power] [serial] [serial] [rmc-comm]
ebus: No EBus's found.
PCIO serial driver version 1.54
su(serial) at 0x7fe010003f8 (tty 0 irq 4,7ac) is a 16550A
su(serial) at 0x7fe010002e8 (tty 1 irq 4,7ac) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
atyfb: 3D RAGE (XL) [0x4752 rev 0x27] 8M SDRAM, 29.498928 MHz XTAL, 235 MHz PLL, 83 Mhz MCLK, 63 Mhz XCLK
Console: switching to colour frame buffer device 160x64
fb0: ATY Mach64 frame buffer device on PCI
kbd_init: Assuming USB keyboard.
pcikbd_init_hw: no 8042 found
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
tg3.c:v2.3 (November 5, 2003)
eth0: Tigon3 [partno(Sun 5704) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:58:2e:1f
eth1: Tigon3 [partno(Sun 5704) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:58:2e:20
eth2: Tigon3 [partno(Sun 5704) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:58:2e:1d
eth3: Tigon3 [partno(Sun 5704) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:58:2e:1e
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 03:0d.0
ALI15X3: chipset revision 196
ALI15X3: 100% native mode on irq 4,798
    ide0: BM-DMA at 0x7fe01000920-0x7fe01000927, BIOS settings: hda:pio, hdb:pio
ALI15X3: simplex device: DMA forced
    ide1: BM-DMA at 0x7fe01000928-0x7fe0100092f, BIOS settings: hdc:DMA, hdd:DMA
hda: CD-224E, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x7fe01000900-0x7fe01000907,0x7fe0100091a on irq 4,798
hda: attached ide-cdrom driver.
hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
sym.1.2.0: setting PCI_COMMAND_INVALIDATE.
sym.1.2.1: setting PCI_COMMAND_INVALIDATE.
sym0: <1010-66> rev 0x1 on pci bus 1 device 2 function 0 irq 4,729
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
sym1: <1010-66> rev 0x1 on pci bus 1 device 2 function 1 irq 4,728
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
scsi1 : sym-2.1.17a
  Vendor: HITACHI   Model: DK32EJ36NSUN36G   Rev: PQ0B
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: HITACHI   Model: DK32EJ36NSUN36G   Rev: PQ0B
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:0:0: tagged command queuing enabled, command queue depth 16.
sym0:1:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
Partition check:
 /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6 p7
sym0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
 /dev/scsi/host0/bus0/target1/lun0:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0x7ff01000000, IRQ 10,7a7
host/usb-ohci.c: usb-03:0a.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
hub.c: new USB device 03:0a.0-1, assigned address 2
input: USB HID v0.01 Mouse [0430:0100] on usb1:2.0
hub.c: new USB device 03:0a.0-2, assigned address 3
input: USB HID v0.01 Keyboard [0430:0005] on usb1:3.0
Adding Swap: 2068504k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,4), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is up at 100 Mbps, half duplex.
tg3: eth0: Flow control is off for TX and off for RX.
tg3: eth0: Link is down.
tg3: eth0: Link is up at 100 Mbps, half duplex.
tg3: eth0: Flow control is off for TX and off for RX.


The Sun Fire v240 have 8 memory slot.
Code:

* 512MB
* 512MB
* empty
* empty
-----------
* 512MB
* 512MB
* empty
* empty

use "free" see total memory is 1290808k.


I try to change the RAM install place.
Code:

* 512MB
* 512MB
* 512MB
* 512MB
-----------
* empty
* empty
* empty
* empty

use "free" see total memory is 1979832k.


If use my compile kernel,it is hang.
serial console
Code:

boot: gentoo-2.4.25
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.4.25
Remapping the kernel.....done

.....then it hang.
Back to top
View user's profile Send private message
yuzan
n00b
n00b


Joined: 15 Apr 2004
Posts: 4

PostPosted: Thu Aug 05, 2004 3:45 pm    Post subject: Reply with quote

I found if just use 1GB memory on sunfire v240.

Then it work fine with kernel 2.4.x or 2.6.x.

Have someone know how to solve it?
Back to top
View user's profile Send private message
19972005
n00b
n00b


Joined: 28 Mar 2005
Posts: 4

PostPosted: Mon Mar 28, 2005 11:13 am    Post subject: Sun Fire V240 gentoo hanging problem Reply with quote

[quote="yuzan"]I found if just use 1GB memory on sunfire v240.
Then it work fine with kernel 2.4.x or 2.6.x.
Have someone know how to solve it?[/quote]
I didn't understand exactly what did you do to solve the problem?
I've same hanging Gentoo w/ Sun Fire V240.
Please give more detailed explanation how to fix that bug.
Did you deinstall some memory, or changed memory position in slots or what?

--
Bye.Olli.
Back to top
View user's profile Send private message
19972005
n00b
n00b


Joined: 28 Mar 2005
Posts: 4

PostPosted: Mon Mar 28, 2005 12:41 pm    Post subject: Re: Sun Fire V240 gentoo hanging problem Reply with quote

Heh. A few minutes later I got the clue. %) I had 2Gb of memory on my Sun Fire.
After deinstalling 1 Gb I got the kernel loaded. Thanks!

--
Bye.Olli.
Back to top
View user's profile Send private message
tbart
Tux's lil' helper
Tux's lil' helper


Joined: 31 Oct 2004
Posts: 137
Location: Baden // Austria

PostPosted: Thu Apr 21, 2005 8:49 pm    Post subject: Reply with quote

same problem here, fresh ultrasparcIIIi, 2x 1,5Ghz, 2GB Ram
only see ~1,2G Ram. But i want to use the 2 Gigs!

Boot PROM sees 2Gs..


my dmesg (latest 2005.0 minimal-install-cd):

Quote:

livecd root # dmesg
PROMLIB: Sun IEEE Boot Prom 4.16.2 2004/10/04 18:22
Linux version 2.4.29-sparc-smp (root@ayanami) (gcc version 3.3.5 (Gentoo Linux 3.3.5)) #1 SMP Tue Mar 15 21:35:41 UTC 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:c4:30:45
On node 0 totalpages: 261215
zone(0): 8519509 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f0065270,mid=0)
Found CPU 1 (node=f0065af0,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/livecd.squashfs noudev devfs cdroot
Calibrating delay loop... 999.42 BogoMIPS
Memory: 1290872k available (2136k kernel code, 704k data, 176k init) [fffff80000000000,000000103feaa000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 131072 (order: 8, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
POSIX conformance testing by UNIFIX
Entering UltraSMPenguin Mode...
Calibrating delay loop... 999.42 BogoMIPS
Total of 2 processors activated (1998.84 BogoMIPS).
CPU 0: synchronized TICK with master CPU (last diff 0 cycles,maxerr 5 cycles)
Waiting on wait_init_idle (map = 0x1)
All processors have done init_idle
PCI: Probing for controllers.
TOMATILLO0 PBMB: ver[4:0], portid 1f, cregs[4000fc00000] pregs[4000ff00000]
TOMATILLO0 PBMB: PCI CFG[7f600000000] IO[7f601000000] MEM[7f700000000]
TOMATILLO0 PBMA: ver[4:0], portid 1e, cregs[4000f400000] pregs[4000f600000]
TOMATILLO0 PBMA: PCI CFG[7fe00000000] IO[7fe01000000] MEM[7ff00000000]
TOMATILLO1 PBMA: ver[4:0], portid 1c, cregs[4000e400000] pregs[4000e600000]
TOMATILLO1 PBMA: PCI CFG[7ce00000000] IO[7ce01000000] MEM[7cf00000000]
TOMATILLO1 PBMB: ver[4:0], portid 1d, cregs[4000ec00000] pregs[4000ef00000]
TOMATILLO1 PBMB: PCI CFG[7c600000000] IO[7c601000000] MEM[7c700000000]
PCI-IRQ: Routing bus[ 0] slot[ 1] map[0] to INO[04]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1d]
PCI1(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[29]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[28]
PCI1(PBMA): Bus running at 66MHz
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[08]
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[09]
PCI0(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 3] slot[ a] map[0] to INO[27]
PCI-IRQ: Routing bus[ 3] slot[ d] map[0] to INO[18]
PCI0(PBMA): Bus running at 33MHz
isa0: [flashprom] [rtc] [i2c -> (i2c-bridge) (i2c-bridge) (motherboard-fru-prom) (chassis-fru-prom) (power-supply-fru-prom) (power-supply-fru-prom) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (rscrtc) (nvram) (idprom) (gpio) (gpio) (gpio) (gpio) (gpio) (gpio)] [power] [serial] [serial] [rmc-comm]
ebus: No EBus's found.
PCIO serial driver version 1.54
su(serial) at 0x7fe010003f8 (tty 0 irq 4,7ac) is a 16550A
su(serial) at 0x7fe010002e8 (tty 1 irq 4,7ac) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
radeonfb: ref_clk=2700, ref_div=67, xclk=16600 defaults
Console: switching to frame buffer device
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
tg3.c:v3.15 (January 6, 2005)
eth0: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:c4:30:47
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth1: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:c4:30:48
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth2: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:c4:30:45
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth3: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:c4:30:46
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 03:0d.0
ALI15X3: chipset revision 196
ALI15X3: 100% native mode on irq 4,798
ide0: BM-DMA at 0x7fe01000920-0x7fe01000927, BIOS settings: hda:pio, hdb:pio
ALI15X3: simplex device: DMA forced
ide1: BM-DMA at 0x7fe01000928-0x7fe0100092f, BIOS settings: hdc:DMA, hdd:DMA
hda: DV-28E-C, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x7fe01000900-0x7fe01000907,0x7fe0100091a on irq 4,798
hda: attached ide-cdrom driver.
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
sym.1.2.0: setting PCI_COMMAND_INVALIDATE.
sym.1.2.1: setting PCI_COMMAND_INVALIDATE.
sym0: <1010-66> rev 0x1 on pci bus 1 device 2 function 0 irq 4,729
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
sym1: <1010-66> rev 0x1 on pci bus 1 device 2 function 1 irq 4,728
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
scsi1 : sym-2.1.17a
Vendor: FUJITSU Model: MAT3073N SUN72G Rev: 0602
Type: Direct-Access ANSI SCSI revision: 04
Vendor: FUJITSU Model: MAT3073N SUN72G Rev: 0602
Type: Direct-Access ANSI SCSI revision: 04
sym0:0:0: tagged command queuing enabled, command queue depth 16.
sym0:1:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p6 p8
sym0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p7
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0x7ff01000000, IRQ 10,7a7
host/usb-ohci.c: usb-03:0a.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 917k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
scsi singledevice 0 0 0 0
VFS: Can't find ext2 filesystem on dev ide0(3,0).
ISO 9660 Extensions: RRIP_1991A
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 22:35:24 Mar 15 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
TOMATILLO1 PBMB: PCI Error, primary error type[Excessive Retries]
TOMATILLO1 PBMB: bytemask[0000] was_block(0) space(Config)
TOMATILLO1 PBMB: PCI AFAR [0000000000002084]
TOMATILLO1 PBMB: PCI Secondary errors [(none)]
tg3: eth0: Link is up at 10 Mbps, half duplex.
tg3: eth0: Flow control is off for TX and off for RX.
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5
Adding Swap: 3907568k swap-space (priority -1)
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is down.
tg3: eth0: Link is up at 10 Mbps, half duplex.
tg3: eth0: Flow control is off for TX and off for RX


Hope ne1 can help me...

Maybe I have to config HIGHMEM in my new kernel? Or is this just for 2.6.x kernels (like on my desktop)?

i didn't see nething like that in /etc/kernels/kernel-config-sparc64-2.4.29-sparc-smp, so i guess 2.4 doesn't have that.

but lots of people here are having 2Gs apparently with no probs...

the machine is emerging system right now, seems ok (not crashing when compiling like mentioned by 19972005 in the above posts)

(and - my god - this thing is FAST...)

please help!

th
_________________
Microsoft is not the answer.
Microsoft is the question, and the answer is no.
Back to top
View user's profile Send private message
squash
Tux's lil' helper
Tux's lil' helper


Joined: 22 Jun 2002
Posts: 79

PostPosted: Mon May 02, 2005 3:11 pm    Post subject: Reply with quote

Hello,

The problem seems to be that the dual memory controller setup is not really working well under linux. Move all your memory to a single CPU and it will run well. If you split it, you will crash under high load. See the other V240 thread for more info.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Sparc All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum