View previous topic :: View next topic |
Author |
Message |
sparhawk37 n00b
Joined: 20 Jun 2004 Posts: 24
|
Posted: Thu Sep 02, 2004 1:26 pm Post subject: |
|
|
It looks like the MBR on your original CDRW still had grub/lilo from the official 2004.2 cd. I would recommend completely eraseing the cdrw before burning anything else on it.
Maybe the software you use to burn is not fully erasing the CDRW. |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 1:41 pm Post subject: |
|
|
Master One wrote: | Looks like I got happy too soon, it's not booting, when starting hotplugging, it can't load module aic79xx (using an ADAPTEC 19160 SCSI-adapter).
Can you please add this module in V1.3?
BTW As it didn't go futher, I don't know if it is already integrated, but can you please check, if the libata module for Sata Sil is included, as well as support for msdos filesystem and floppy support (I remember the love-livecd missing floppy support)? |
Floppy support: ok
MSDOS support: ok
SCSI is completely supported as modules: so >> modprobe aic79xx
CONFIG_SCSI_SATA: y >> so libata is ok _________________ http://www.sabayon.org |
|
Back to top |
|
|
giuseppe Tux's lil' helper
Joined: 25 Apr 2004 Posts: 78
|
Posted: Thu Sep 02, 2004 1:42 pm Post subject: |
|
|
Ho una Broadcom Corporation BCM4401 100Base-T, quando avvio il CD non mi viene caricato
il modulo b44 anche se mi viene riconosciuta la scheda. Quando tento con modprobe b44, mi
il sistema risponde che il modulo non esiste. Why? _________________ "Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor |
|
Back to top |
|
|
Master One l33t
Joined: 25 Aug 2003 Posts: 754 Location: Austria
|
Posted: Thu Sep 02, 2004 1:47 pm Post subject: |
|
|
@lxnay
I see, but strangely I can not get that far, as when starting hotplugging, it can't load module aic79xx and then the systems simply hangs... (also I can see the module in /lib/modules/2.6.9-rc-mm2, there has to be something wrong as hotplug can't load it, not sure about that). _________________ Las torturas mentales de la CIA |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 1:50 pm Post subject: |
|
|
Master One wrote: | @lxnay
I see, but strangely I can not get that far, as when starting hotplugging, it can't load module aic79xx and then the systems simply hangs... (also I can see the module in /lib/modules/2.6.9-rc-mm2, there has to be something wrong as hotplug can't load it, not sure about that). |
try at boot this string:
gentoo nohotplug _________________ http://www.sabayon.org |
|
Back to top |
|
|
masterbrian Guru
Joined: 13 Feb 2004 Posts: 461
|
Posted: Thu Sep 02, 2004 1:55 pm Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
lxnay wrote: | masterbrian wrote: | lxnay wrote: | non mi sono mai interessato di dmcrypt e cryptotools, |
E non potersti includerli nella prossima release? |
ok vedo che posso fare, sto completando la prima parte della ricompilazione del LiveCD lo inserirò nella parte finale del build se riesco
Hai qualche modulo del kernel che devo inserire in particolare oltre a dm-crypt? |
Si magari ecco l'elenco:
Cryptographic options -> <M> MD5 digest algorithm
<M> SHA1 digest algorithm
<M> SHA256 digest algorithm
<M> SHA384 and SHA512 digest algorithms
<M> DES and Triple DES EDE cipher algorithms
<M> Blowfish cipher algorithm
<M> AES cipher algorithms (i586)
Code maturity level options --->
<*> Prompt for development and/or incomplete code/drivers
Device Drivers ---> Generic Driver Options --->
<M> Hotplug firmware loading support
Device Drivers ---> Multi-device support (RAID and LVM) --->
<M> Device mapper support
<M> Crypt target support
Poi sarebbe indispensabile l'ultimo cryptsetup il cui ebuild (overlay) si trova qui
E farebbe comodo pam-usb
Se chiedo troppo sorry
Grazie per la tua disponibilita'! |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 3:18 pm Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
masterbrian wrote: | lxnay wrote: | masterbrian wrote: | lxnay wrote: | non mi sono mai interessato di dmcrypt e cryptotools, |
E non potersti includerli nella prossima release? |
ok vedo che posso fare, sto completando la prima parte della ricompilazione del LiveCD lo inserirò nella parte finale del build se riesco
Hai qualche modulo del kernel che devo inserire in particolare oltre a dm-crypt? |
Si magari ecco l'elenco:
Cryptographic options -> <M> MD5 digest algorithm
<M> SHA1 digest algorithm
<M> SHA256 digest algorithm
<M> SHA384 and SHA512 digest algorithms
<M> DES and Triple DES EDE cipher algorithms
<M> Blowfish cipher algorithm
<M> AES cipher algorithms (i586)
Code maturity level options --->
<*> Prompt for development and/or incomplete code/drivers
Device Drivers ---> Generic Driver Options --->
<M> Hotplug firmware loading support
Device Drivers ---> Multi-device support (RAID and LVM) --->
<M> Device mapper support
<M> Crypt target support
Poi sarebbe indispensabile l'ultimo cryptsetup il cui ebuild (overlay) si trova qui
E farebbe comodo pam-usb
Se chiedo troppo sorry
Grazie per la tua disponibilita'! |
C'è tutto tranne cryptsetup e pam-usb, ho inserito cryptoapi perché pensavo fosse quello che contenesse cryptotools (che non esiste?).
Purtroppo il tuo post è arrivato un po' in ritardo La prossima versione includerà cryptsetup e forse pam-usb (mi farò aiutare da scox ) _________________ http://www.sabayon.org |
|
Back to top |
|
|
Master One l33t
Joined: 25 Aug 2003 Posts: 754 Location: Austria
|
Posted: Thu Sep 02, 2004 3:22 pm Post subject: |
|
|
Thank's, lxnay, the option nousb and nohotplug did it, but I run into more problems.
At first, there are no /dev/md* devices created, I had to do it with mknod manually. Then mdadm was not found, so I tried it with mkraid, but I only got the following error msg: Code: | ~ # mkraid
cannot determine md version: 6. |
And finally my ssh connection was terminated, on the console output I could see the following: Code: | eth0: Too much work at interrupt!
livecd NETDEV WATCHDOG: eth0: transmit timed out
livecd eth0: TX Timeout
livecd eth0: no Rx buffer allocated
livecd eth0: no Rx buffer allocated
.
.
.
livecd eth0: Too much work at interrupt! |
After that the system hang, and I had to do a hardreboot.
No idea what that is about. I am using a gigabit lan adapter with RTL8169S.
You seem to have compiled this module into the kernel, as it didn't get loaded during boot, also my network adapter was correctly initalized.
Either this is a kernel problem with 2.6.9-rc1-mm2, or something went wrong with the RTL8169 support.
Can you check this please? _________________ Las torturas mentales de la CIA |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 3:22 pm Post subject: |
|
|
per quanto riguarda cryptsetup, potresti darmi direttamente il bugzilla, xché altrimenti x me è un casino. _________________ http://www.sabayon.org |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 3:26 pm Post subject: |
|
|
Master One wrote: | Thank's, lxnay, the option nousb and nohotplug did it, but I run into more problems.
At first, there are no /dev/md* devices created, I had to do it with mknod manually. Then mdadm was not found, so I tried it with mkraid, but I only got the following error msg: Code: | ~ # mkraid
cannot determine md version: 6. |
And finally my ssh connection was terminated, on the console output I could see the following: Code: | eth0: Too much work at interrupt!
livecd NETDEV WATCHDOG: eth0: transmit timed out
livecd eth0: TX Timeout
livecd eth0: no Rx buffer allocated
livecd eth0: no Rx buffer allocated
.
.
.
livecd eth0: Too much work at interrupt! |
After that the system hang, and I had to do a hardreboot.
No idea what that is about. I am using a gigabit lan adapter with RTL8169S.
You seem to have compiled this module into the kernel, as it didn't get loaded during boot, also my network adapter was correctly initalized.
Either this is a kernel problem with 2.6.9-rc1-mm2, or something went wrong with the RTL8169 support.
Can you check this please? |
RAID will work with upcoming 1.3 version
Ethernet drivers problems are solved in 1.3 by modularizing everything, so you'll have to modprobe it (if hotplug is disabled) _________________ http://www.sabayon.org |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 3:29 pm Post subject: |
|
|
giuseppe wrote: | Ho una Broadcom Corporation BCM4401 100Base-T, quando avvio il CD non mi viene caricato
il modulo b44 anche se mi viene riconosciuta la scheda. Quando tento con modprobe b44, mi
il sistema risponde che il modulo non esiste. Why? |
ora controllo...
update: la versione 1.2 ha tutti i driver ethernet integrati nel kernel, la 1.3 li avrà come moduli. Quindi la tua ethernet al momento attuale viene riconosciuta, basta che dai un "ifconfig eth0 up" (o eth1 boh) per farla vedere in ifconfig.
Ricordati che nella futura 1.3 dovrai dare modprobe b44 se hotplug nn te la carica (certo che hotplug ha un po' di problemi eh) _________________ http://www.sabayon.org
Last edited by lxnay on Thu Sep 02, 2004 3:49 pm; edited 1 time in total |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 3:35 pm Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
masterbrian wrote: |
Poi sarebbe indispensabile l'ultimo cryptsetup il cui ebuild (overlay) si trova qui
E farebbe comodo pam-usb
Se chiedo troppo sorry
Grazie per la tua disponibilita'! |
1.3 Delayed, perché?
1. sto aggiungendo pam_usb e cryptsetup e rimediando ad un problemino con SYSLINUX e gli script schifosi con cui devo combattere
Fra qualche ora sarà disponibile _________________ http://www.sabayon.org |
|
Back to top |
|
|
masterbrian Guru
Joined: 13 Feb 2004 Posts: 461
|
Posted: Thu Sep 02, 2004 3:35 pm Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
lxnay wrote: |
C'è tutto tranne cryptsetup e pam-usb, ho inserito cryptoapi perché pensavo fosse quello che contenesse cryptotools (che non esiste?).
Purtroppo il tuo post è arrivato un po' in ritardo La prossima versione includerà cryptsetup e forse pam-usb (mi farò aiutare da scox ) |
Si hai ragione, cryptotools non esiste, era cryptosetup, grazie cmq. Aspettero' la prossima release, con impazienza |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 3:51 pm Post subject: |
|
|
qualche mod potrebbe mettere questo thread come sticky ?
@masterbrian: la 1.3 farà x te _________________ http://www.sabayon.org |
|
Back to top |
|
|
Merlink Tux's lil' helper
Joined: 01 Sep 2004 Posts: 104 Location: Agrigento, Italy
|
Posted: Thu Sep 02, 2004 5:30 pm Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
lxnay wrote: | masterbrian wrote: |
Poi sarebbe indispensabile l'ultimo cryptsetup il cui ebuild (overlay) si trova qui
E farebbe comodo pam-usb
Se chiedo troppo sorry
Grazie per la tua disponibilita'! |
1.3 Delayed, perché?
1. sto aggiungendo pam_usb e cryptsetup e rimediando ad un problemino con SYSLINUX e gli script schifosi con cui devo combattere
Fra qualche ora sarà disponibile |
Pam_usb?
che utilizzo puo' avere in un livecd il cui uso primario e' quello di permettere un boot per lo stageX?
Secondo me e' inutile, ammenoche' non punti a creare un livecd a la knoppix...
Saluti
(still waiting for the LVM ^_^ ) |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 5:44 pm Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
Merlink wrote: |
(still waiting for the LVM ^_^ ) |
Ho risolto anche l'ultimo problema con gli script di build della ISO, ho creato uno script che fa tutto in AUTO, compreso l'upload Con la prossima versione lo script aggiornerà pure index.html del miror scarlet.nl
Beh, comunque, io torno per le undici e mezza, a quell'ora mi basterà cambiare il primo post con 1.3 e aggiungere l'md5 sum nuovo.
Tranquillo, LVM funzionerà _________________ http://www.sabayon.org |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 9:46 pm Post subject: |
|
|
Rilasciata versione 1.3 Enjoy it ! _________________ http://www.sabayon.org |
|
Back to top |
|
|
abaddon83 Guru
Joined: 17 Jan 2004 Posts: 494
|
Posted: Thu Sep 02, 2004 9:59 pm Post subject: |
|
|
scusate nella 1.3 il raid1 è implementato? _________________ Abaddon's House
Jabber account: abaddon@jabber.linux.it |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Thu Sep 02, 2004 10:20 pm Post subject: |
|
|
abaddon83 wrote: | scusate nella 1.3 il raid1 è implementato? |
si integrato nel kernel _________________ http://www.sabayon.org |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Fri Sep 03, 2004 6:41 am Post subject: Re: update |
|
|
aggiorna a 1.3 _________________ http://www.sabayon.org |
|
Back to top |
|
|
masterbrian Guru
Joined: 13 Feb 2004 Posts: 461
|
Posted: Fri Sep 03, 2004 7:44 am Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
Merlink wrote: | Pam_usb?
che utilizzo puo' avere in un livecd il cui uso primario e' quello di permettere un boot per lo stageX?
Secondo me e' inutile, ammenoche' non punti a creare un livecd a la knoppix... |
se lo usi per fare forense e' utile |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Fri Sep 03, 2004 7:50 am Post subject: Re: [REISER4] reiser4 livecd ready !! |
|
|
masterbrian wrote: | Merlink wrote: | Pam_usb?
che utilizzo puo' avere in un livecd il cui uso primario e' quello di permettere un boot per lo stageX?
Secondo me e' inutile, ammenoche' non punti a creare un livecd a la knoppix... |
se lo usi per fare forense e' utile |
are you happy now ? _________________ http://www.sabayon.org |
|
Back to top |
|
|
giuseppe Tux's lil' helper
Joined: 25 Apr 2004 Posts: 78
|
Posted: Fri Sep 03, 2004 8:49 am Post subject: |
|
|
Grazie lxnay! Avevo dato per scontato che le schede di rete fossero state inserite come
moduli; così non ho provato a richiamarla direttamente dal kernel. Le abitudini sono pessime
consigliere.
Ti ringrazio per aver fatto questo live, è veramente utile. _________________ "Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor |
|
Back to top |
|
|
lxnay Retired Dev
Joined: 09 Apr 2004 Posts: 661 Location: Italy
|
Posted: Fri Sep 03, 2004 9:16 am Post subject: |
|
|
giuseppe wrote: | Grazie lxnay! Avevo dato per scontato che le schede di rete fossero state inserite come
moduli; così non ho provato a richiamarla direttamente dal kernel. Le abitudini sono pessime
consigliere.
Ti ringrazio per aver fatto questo live, è veramente utile. |
grazie a te per averlo provato! La versione 1.3 ha il driver b44 come modulo, quindi occhio che se hotplug non lo vede devi fare modprobe b44 a manina _________________ http://www.sabayon.org |
|
Back to top |
|
|
giuseppe Tux's lil' helper
Joined: 25 Apr 2004 Posts: 78
|
Posted: Fri Sep 03, 2004 10:42 am Post subject: |
|
|
lxnay ho tentato con la versione 1.3, non ho incontrato alcun problema con l'hardware.
Ma non riesco a usare l'opzione cdcache senza problemi. All'atto di fare la cache su ram, il
sistema mi dice, dopo un po', che sta avendo problemi in lettura/scrittura (input/output error) e poi mi dà una sfilza di messaggi di errore che dicono che non c'è spazio on disc. Quindi prosegue
così ad infinitum.
Il live 1.2, invece, si bloccava del tutto al cdcache.
Solo aggiungo che la ram non ha problemi al test. _________________ "Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor |
|
Back to top |
|
|
|