| View previous topic :: View next topic |
| Author |
Message |
Shewty
n00b
Joined: 29 Dec 2004
Posts: 8
|
 Posted: Fri Jan 14, 2005 1:06 pm Post subject: Warcraft3 problem[SOLVED] |
 |
|
so I got wc3 working through wine (nocd-crack) but there is still one big problem :E
when I launch war3.exe , the start menu comes where is single palyer etc, but it's veryvery slow. 
I have wine 20041019
and here is my config:
| Code: | WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
;; NOTICE: Uncomment and modify the drives you want to use.
;;[Drive A]
;;"Path" = "/mnt/fd0"
;;"Type" = "floppy"
;;"Label" = "Floppy"
;;"Filesystem" = "win95"
;;"Serial" = "87654321"
;;"Device" = "/dev/fd0"
[Drive C]
"Path" = "/home/shewty.wine/fake_windows"
"Type" = "hd"
"Label" = "/home/shewty/.wine/fake_windows"
"Filesystem" = "win95"
;;[Drive D]
;;"Path" = "/path/to/drive_d"
;;"Type" = "hd"
;;"Label" = "LABEL"
;;"Filesystem" = "win95"
[Drive E]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
"Device" = "/dev/cdroms/cdrom0"
;;[Drive F]
;;"Path" = "tmp"
;;"Type" = "hd"
;;"Label" = "Label"
;;"Filesystem" = "win95"
[Drive H]
"Path" = "../"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[Drive Z]
"Path" = "/"
"Type" = "network"
"Label" = "Root"
"Filesystem" = "win95"
[wine]
"Windows" = "c:\\Windows"
"System" = "c:\\Windows\\System"
"Temp" = "f:\\"
"Path" = "c:\\Windows;c:\\Windows\\System;f:\\;h:\\;z:\\"
"Profile" = "c:\\Windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"
# <wineconf>
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)" },
"Windows" = "win2k"
; DOS version to imitate
"DOS" = "6.22"
; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
"rpcrt4" = "builtin, native"
"oleaut32" = "builtin, native"
"ole32" = "builtin, native"
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"
; you can specify applications too
"notepad.exe" = "native, builtin"
; default for all other dlls
"*" = "native, builtin"
[AppDefaults\\msimn.exe\\DllOverrides]
; For ie6
"*comctl32" = "builtin"
; For Outlook97
"mapi" = "native, builtin"
"mapi32" = "native, builtin"
; Native dlls needed for various parts of the install
"ole32" = "native, builtin"
"compobj" = "native, builtin"
"ole2" = "native, builtin"
"ole2nls" = "native, builtin"
"ole2conv" = "native, builtin"
"ole2prox" = "native, builtin"
"ole2thk" = "native, builtin"
"storage" = "native, builtin"
"olepro32" = "native, builtin"
"rpcrt4" = "native, builtin"
"oleaut32" = "native, builtin"
"msvcrt" = "native, builtin"
"wininet" = "native, builtin"
; for the ie runonce
"setupapi" = "native, builtin"
"devenum" = "native, builtin"
"quartz" = "native, builtin"
"urlmon" = "native"
"shdocvw" = "native, builtin"
"jscript" = "native, builtin"
"wintrust" = "native, builtin"
"shlwapi" = "native, builtin"
"secur32" = "native, builtin"
"crypt32" = "native, builtin"
"ddraw" = "native, builtin"
; allow launching user.exe (for Remedy)
"*user.exe" = "native,builtin"
; default for all other dlls
"*" = "builtin, native"
[AppDefaults\\IEXPLORE.EXE\\DllOverrides]
; For ie6
"*comctl32" = "builtin"
; For Outlook97
"mapi" = "native, builtin"
"mapi32" = "native, builtin"
; Native dlls needed for various parts of the install
"ole32" = "native, builtin"
"compobj" = "native, builtin"
"ole2" = "native, builtin"
"ole2nls" = "native, builtin"
"ole2conv" = "native, builtin"
"ole2prox" = "native, builtin"
"ole2thk" = "native, builtin"
"storage" = "native, builtin"
"olepro32" = "native, builtin"
"rpcrt4" = "native, builtin"
"oleaut32" = "native, builtin"
"msvcrt" = "native, builtin"
"wininet" = "native, builtin"
; for the ie runonce
"setupapi" = "native, builtin"
"devenum" = "native, builtin"
"quartz" = "native, builtin""urlmon" = "native"
"shdocvw" = "native, builtin"
"jscript" = "native, builtin"
"wintrust" = "native, builtin"
"shlwapi" = "native, builtin"
"secur32" = "native, builtin"
"crypt32" = "native, builtin"
"ddraw" = "native, builtin"
; allow launching user.exe (for Remedy)
"*user.exe" = "native,builtin"
; default for all other dlls
"*" = "builtin, native"
[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "Y"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;;"Synchronous" = "Y"
[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-bitstream-bitstream vera sans-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-bitstream-bitstream vera serif-"
"DefaultSansSerif" = "-bitstream-bitstream vera sans-"
;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"
; the TrueType font dirs you want to make accessible to wine
[FontDirs]
;"dir1" = "/usr/X11R6/lib/X11/fonts/TrueType"
;"dir2" = "/usr/share/fonts/truetype"
;"dir3" = "/usr/X11R6/lib/X11/fonts/TT"
;"dir4" = "/usr/share/fonts/TT"
"dir1" = "/usr/share/fonts/ttf-bitstream-vera"
"dir2" = "/usr/share/fonts/corefonts"
[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"
[parallelports]
"Lpt1" = "/dev/lp0"
[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"
[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"
[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
;"write" = "0x779,0x379,0x280-0x2a0"
[Debug]
;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"RelayInclude" = "user32.CreateWindowA"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"
[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"
[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Win95"
[Console]
;"Drivers" = "tty"
;"XtermProg" = "nxterm"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"
[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"
; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/a2ps/afm"
"3" = "/usr/share/enscript"
"4" = "/usr/X11R6/lib/X11/fonts/Type1"
[WinMM]
"Drivers" = "wineoss.drv"
#"Drivers" = "winearts.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"
[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"
;; sample AppDefaults entries
;[AppDefaults\\iexplore.exe\\DllOverrides]
;"shlwapi" = "native"
;"rpcrt4" = "native"
;"ole32" = "native"
;"shdocvw" = "native"
;"wininet" = "native"
;"shfolder" = "native"
;"shell32" = "native"
;"shell" = "native"
;"comctl32" = "native"
;
;[AppDefaults\\setup.exe\\x11drv]
;"Desktop" = "800x600"
;
;[AppDefaults\\sol.exe\\Version]
;"Windows" = "nt40"
;
;; Some games (Quake 2, UT) refuse to accept emulated dsound devices.
;; You can add an AppDefault entry like this for such cases.
;[AppDefaults\\pickygame.exe\\dsound]
;"EmulDriver" = "N"
;; Kazaa Lite
[AppDefaults\\KazaaLite.kpp\\DllOverrides]
"*" = "builtin, native, so"
;"shdoclc" = "native"
"shdocvw" = "native"
"shlwapi" = "native"
"commctrl" = "native"
;"comdlg32" = "native"
"oleaut32" = "native"
"ole32" = "native"
[AppDefaults\\DCPlusPlus.exe\\DllOverrides]
"*" = "builtin, native"
"comctl32" = "native"
"commctrl" = "native"
"comdlg32" = "native"
"riched20" = "native"
[AppDefaults\\war3.exe\\x11drv]
;"Desktop" = "1024x768"
"Managed" = "N"
"Desktop" = "800x600"
# </wineconf> |
Anyone knows how to solve this problem? :/
_________________
Baka.
Last edited by Shewty on Tue Jan 18, 2005 8:01 pm; edited 1 time in total |
|
| Back to top |
|
 |
Tuna
Guru
Joined: 19 Jul 2002
Posts: 485
Location: Berlin
|
| Posted: Fri Jan 14, 2005 1:51 pm Post subject: |
|
|
| did you by chance have a nvidia card and enabled antialising with the nvidia-settings menu (or enabled it by any other way)? try to disable it then. warcraft3 or wine dont really like that performance wise. |
|
| Back to top |
|
|
Shewty
n00b
Joined: 29 Dec 2004
Posts: 8
|
| Posted: Fri Jan 14, 2005 2:50 pm Post subject: |
|
|
hmh I have ati radeon 9600 xt and I dont know shit about X because new in linux. (hmh linux on my computer about 2 months)
_________________
Baka. |
|
| Back to top |
|
|
BlackEdder
Advocate
Joined: 26 Apr 2004
Posts: 2588
Location: Dutch enclave in Egham, UK
|
| Posted: Fri Jan 14, 2005 3:01 pm Post subject: |
|
|
what is the output of glxinfo | grep direct??
Did you install the ati-drivers and are they working. A short howto for ati-drivers:
| Code: | emerge ati-drivers
backup your /etc/X11/xorg.conf
fglrxconfig
opengl-update ati
and restart x |
|
|
| Back to top |
|
|
eNTi
Veteran
Joined: 20 Oct 2002
Posts: 1011
Location: Salzburg, Austria
|
| Posted: Sat Jan 15, 2005 2:30 pm Post subject: |
|
|
ati and wine generally don't go along very well. ati drivers for linux are not the best one's out there, but yes, it could also because, you have mesa installed or something.
_________________
If you fall off a cliff, you might as well try to fly. After all, you got nothing to lose.
-- John Sheridan - Babylon 5, Season 4 |
|
| Back to top |
|
|
Dais
l33t
Joined: 05 Aug 2004
Posts: 977
Location: Québec
|
| Posted: Sat Jan 15, 2005 4:47 pm Post subject: |
|
|
Also, in the X11drv section, try to change to
_________________
Tout ce que je suis n'est que cause
Tout ce que je suis n'est que conséquence
Pourquoi s'attacher à toutes ces choses
Pourquoi continuer dans la souffrance ?
-
Shiki Soku Ze Ku, Ku Soku Ze Shiki |
|
| Back to top |
|
|
hackerError
Guru
Joined: 14 Mar 2003
Posts: 342
Location: Reston, VA, USA
|
| Posted: Sat Jan 15, 2005 5:00 pm Post subject: |
|
|
Have you tried:
wine -- path\to\warcraft\FrozenThrone.exe -opengl
the -opengl flag passed to warcraft NOT wine (note the --) makes it use opengl rather than emulating directX
And WINE used to stand for WINdowsEmulator, for you Wine Is Not an Emulator zealots
_________________
Before you insult someone, it is often best to walk a mile in their shoes.
That way when you insult them you're already a mile away and have their shoes. |
|
| Back to top |
|
|
Shewty
n00b
Joined: 29 Dec 2004
Posts: 8
|
| Posted: Tue Jan 18, 2005 8:00 pm Post subject: |
|
|
Thanks a lot to BlackEdder  and thanks to others who posted too :>
_________________
Baka. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gamers & Players
