| View previous topic :: View next topic |
| Author |
Message |
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
 Posted: Sun Jan 02, 2005 8:53 pm Post subject: i've messed up with KDE and NVidia |
 |
|
 I had a great KDE install. Worked just about perfectly with my Nvidia card, followed the how to's they were great, of course. Had openGL working. I can still run kde/kdm but , for instance, when I run KDM: the NVidia pic comes up as usual, but then when the login screen appears, most of the images used to create the window are still being covered up by the initial NVidia pic. now, the clock DOES work. as well as the text boxes, aside from being half unreadable.
Therefore, I can still log in, but KDE still has the look about it that it can't load the images necessary. So, its pretty screwed, but i'm sure its something I did. Well, I'm positive. I was fixing a small extension in opengl, when i was told to re-emerge nvidia-glx. not a good idea. As i'm not quite sure whats going on, I don't know which files to post. but I can provide you with this very entertaining screenshot of what happens. 
http://homepage.mac.com/vati49/snapshot1.png
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
 |
fireflymantis
n00b
Joined: 02 Jan 2005
Posts: 43
Location: Edmonton, Alberta, Canada
|
| Posted: Sun Jan 02, 2005 9:01 pm Post subject: Well. I've never seen that before :D |
|
|
could you please explain exactly what you did to modify that openGL extention. something about the X11 redraw is seriously whacked.
by extention. do you mean in your XFree/xorg config file?
does openGL still work?
if you switch back to X's video driver (using opengl-update & changing config to nv driver vs nvidia) make the problem go away?
could you also supply the output of glxinfo (If openGL is still working)
_________________
I'm Bored. Give me Ideas. feed my brain. w/e. marty@pixelalmighty.com
Sanguine Happiness |
|
| Back to top |
|
|
kill
Apprentice
Joined: 24 Dec 2004
Posts: 179
|
| Posted: Sun Jan 02, 2005 9:31 pm Post subject: |
|
|
| What kind of graphis card are you using? There are issues with the latest Nvidia drivers and Geforce 4 cards. |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Sun Jan 02, 2005 9:34 pm Post subject: |
|
|
| Quote: | could you please explain exactly what you did to modify that openGL extention. something about the X11 redraw is seriously whacked.
|
well, I re-emerged the nvidia-glx package entirely. I got this idea so that I might be able to install the "GL_ARB_vertex_program" GLX extension. i needed this to be able to play my silly little game (Battlefield 1942). it requires the use of vertex shaders.
| Quote: | | does openGL still work? |
OpenGL does seem to work. I can not post the output from "glxinfo" tho. Can't read it. Although, I can blindly open a terminal and run glxgears. And surprisingly, it does work.
| Quote: | if you switch back to X's video driver (using opengl-update & changing config to nv driver vs nvidia) make the problem go away?
|
nope.
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
fireflymantis
n00b
Joined: 02 Jan 2005
Posts: 43
Location: Edmonton, Alberta, Canada
|
| Posted: Sun Jan 02, 2005 10:00 pm Post subject: bloop |
|
|
hmmm. that is really weird. first of all, i do not directly see how changes to openGL librarys would change the behavoir of x window updates. check to see if the problem persists in all of X, or just kde. try running in TWM or something ugly like that and see if the problem persists. may be Kde's use of the XRender extension.
also, you should be able to pull off glxinfo from a true consol using -display
btw. i'm listning to you podcasts. i share your loathing for the ubiquiness of advertising.
_________________
I'm Bored. Give me Ideas. feed my brain. w/e. marty@pixelalmighty.com
Sanguine Happiness |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Sun Jan 02, 2005 10:29 pm Post subject: |
|
|
whew, after some digging. Here you go.
GLXINFO
| Code: |
sh-2.05b$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.3
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce4 MX 4000/PCI/SSE2
OpenGL version string: 1.5.2 NVIDIA 66.29
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr,
GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object,
GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shared_texture_palette,
GL_EXT_stencil_wrap, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_fence,
GL_NV_fog_distance, GL_NV_light_max_exponent, GL_NV_packed_depth_stencil,
GL_NV_pixel_data_range, GL_NV_point_sprite, GL_NV_register_combiners,
GL_NV_texgen_reflection, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_vertex_array_range,
GL_NV_vertex_array_range2, GL_NV_vertex_program, GL_NV_vertex_program1_1,
GL_SGIS_generate_mipmap, GL_SGIS_multitexture, GL_SGIS_texture_lod,
GL_SUN_slice_accum
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x23 24 tc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x25 24 tc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x2a 24 tc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x2b 24 tc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x2c 24 tc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x2d 24 tc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x2e 24 dc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x2f 24 dc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x31 24 dc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x32 24 dc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x33 24 dc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x34 24 dc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x35 24 dc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x36 24 dc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x37 24 dc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x38 24 dc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
|
As for the issues between GeForce cards and Drivers, it worked beautifully just before this, i don't think its that. it must be the XRender. As for now, i'm off to try TWM.
podcast: haha, thats awesome! I hope you enjoy it. I haven't done one in SOO long. I'll be starting it back up again once school starts. (Tomorrow. )[/b]
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
fireflymantis
n00b
Joined: 02 Jan 2005
Posts: 43
Location: Edmonton, Alberta, Canada
|
| Posted: Fri Jan 07, 2005 7:39 pm Post subject: |
|
|
Just checking to see if you have made any leeway. in getting you system back up.
i thought of some things that you might want to try in your x config file
in the module section, make sure you have:
| Code: | SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection |
else nvidia cards are apt to do weird things.
also, if X is running in single buffer mode, it could be causing the problems you have. make sure you have the line
| Code: |
Load "dbe" # Double buffer extension |
in the module section.
also, because you are using the nvidia drivers, make sure you do NOT have this line:
If the problem is with the Xrender extension, it may be having some hiccups working with the nvidia driver. try adding this line to your device section for your video card.
| Code: |
Option "RenderAccel" "true" |
_________________
I'm Bored. Give me Ideas. feed my brain. w/e. marty@pixelalmighty.com
Sanguine Happiness |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Fri Jan 07, 2005 11:00 pm Post subject: |
|
|
Yup, that is all true. i've done everything i know to do. Although I haven't had much time this week. First week back in school :-/
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Sun Jan 16, 2005 11:42 pm Post subject: Still Nothing |
|
|
Well, I'm coming back around on my three day weekend. I still don't know what in the world is going on.
Should i try to reemerge XWindows?
There must be another way...
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Sat Apr 02, 2005 7:05 pm Post subject: back |
|
|
okay, after a fair amount of time, I'm back with direct rendering enabled. I re-emerged nvidia-kernel and nvidia-glx. It still has the odd UI. Here is the updated glxinfo. I can use the "nv" drivers, which is what I am using now. From the looks of glxinfo, It isn't something wrong with the nvidia drivers.... 
| Code: |
sh-2.05b$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.3
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce4 MX 4000/PCI/SSE2
OpenGL version string: 1.5.2 NVIDIA 66.29
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr,
GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object,
GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shared_texture_palette,
GL_EXT_stencil_wrap, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_fence,
GL_NV_fog_distance, GL_NV_light_max_exponent, GL_NV_packed_depth_stencil,
GL_NV_pixel_data_range, GL_NV_point_sprite, GL_NV_register_combiners,
GL_NV_texgen_reflection, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_vertex_array_range,
GL_NV_vertex_array_range2, GL_NV_vertex_program, GL_NV_vertex_program1_1,
GL_SGIS_generate_mipmap, GL_SGIS_multitexture, GL_SGIS_texture_lod,
GL_SUN_slice_accum
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x23 24 tc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x25 24 tc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x2a 24 tc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x2b 24 tc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x2c 24 tc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x2d 24 tc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x2e 24 dc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x2f 24 dc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x31 24 dc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x32 24 dc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x33 24 dc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x34 24 dc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x35 24 dc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x36 24 dc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x37 24 dc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x38 24 dc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
|
here is the log created by startx when testing the nvidia driver.
| Code: |
This is a pre-release version of the The X.Org Foundation X11.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the The X.Org Foundation "monolithic tree" CVS
repository hosted at http://www.freedesktop.org/Software/xorg/
X Window System Version 6.8.1.902 (6.8.2 RC 2)
Release Date: 12 January 2005
X Protocol Version 11, Revision 0, Release 6.8.1.902
Build Operating System: Linux 2.4.26-gentoo-r14 i686 [ELF]
Current Operating System: Linux Naboo 2.4.26-gentoo-r14 #1 Wed Dec 29 08:51:58 CST 2004 i686
Build Date: 24 January 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 2 17:23:06 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "SyncMaster"
(**) | |-->Device "NVidia GeForce MX 4000"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2560 card 1028,0147 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2562 card 1028,0147 rev 03 class 03,80,00 hdr 00
(II) PCI: 00:1d:0: chip 8086,24c2 card 1028,0147 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1028,0147 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1028,0147 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1028,0147 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1028,0147 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1028,0147 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1028,0147 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:04:0: chip 10de,0185 card 0000,0000 rev c1 class 03,00,00 hdr 00
(II) PCI: 01:05:0: chip 104c,8024 card 9005,0030 rev 00 class 0c,00,10 hdr 00
(II) PCI: 01:09:0: chip 14e4,4401 card 1028,8127 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe6ffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI: (0:2:0) Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device rev 3, Mem @ 0xd0000000/27, 0xe7000000/19
(--) PCI:*(1:4:0) nVidia Corporation unknown chipset (0x0185) rev 193, Mem @ 0xe4000000/24, 0xd8000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe6004000 - 0xe6005fff (0x2000) MX[B]
[1] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B]
[2] -1 0 0xe6006000 - 0xe60067ff (0x800) MX[B]
[3] -1 0 0xe7082000 - 0xe70820ff (0x100) MX[B]
[4] -1 0 0xe7081000 - 0xe70811ff (0x200) MX[B]
[5] -1 0 0x3ff00000 - 0x3ff003ff (0x400) MX[B]
[6] -1 0 0xe7080000 - 0xe70803ff (0x400) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[10] -1 0 0xe7000000 - 0xe707ffff (0x80000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[14] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[15] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe6004000 - 0xe6005fff (0x2000) MX[B]
[1] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B]
[2] -1 0 0xe6006000 - 0xe60067ff (0x800) MX[B]
[3] -1 0 0xe7082000 - 0xe70820ff (0x100) MX[B]
[4] -1 0 0xe7081000 - 0xe70811ff (0x200) MX[B]
[5] -1 0 0x3ff00000 - 0x3ff003ff (0x400) MX[B]
[6] -1 0 0xe7080000 - 0xe70803ff (0x400) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[10] -1 0 0xe7000000 - 0xe707ffff (0x80000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[14] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[15] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6004000 - 0xe6005fff (0x2000) MX[B]
[6] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B]
[7] -1 0 0xe6006000 - 0xe60067ff (0x800) MX[B]
[8] -1 0 0xe7082000 - 0xe70820ff (0x100) MX[B]
[9] -1 0 0xe7081000 - 0xe70811ff (0x200) MX[B]
[10] -1 0 0x3ff00000 - 0x3ff003ff (0x400) MX[B]
[11] -1 0 0xe7080000 - 0xe70803ff (0x400) MX[B]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[15] -1 0 0xe7000000 - 0xe707ffff (0x80000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[21] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[25] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.1.902, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nv"
(II) Loading /usr/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
0x0211, 0x021D, 0x021E
(II) Primary Device is: PCI 01:04:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce4 MX 4000 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6004000 - 0xe6005fff (0x2000) MX[B]
[6] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B]
[7] -1 0 0xe6006000 - 0xe60067ff (0x800) MX[B]
[8] -1 0 0xe7082000 - 0xe70820ff (0x100) MX[B]
[9] -1 0 0xe7081000 - 0xe70811ff (0x200) MX[B]
[10] -1 0 0x3ff00000 - 0x3ff003ff (0x400) MX[B]
[11] -1 0 0xe7080000 - 0xe70803ff (0x400) MX[B]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[15] -1 0 0xe7000000 - 0xe707ffff (0x80000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[21] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[25] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6004000 - 0xe6005fff (0x2000) MX[B]
[6] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B]
[7] -1 0 0xe6006000 - 0xe60067ff (0x800) MX[B]
[8] -1 0 0xe7082000 - 0xe70820ff (0x100) MX[B]
[9] -1 0 0xe7081000 - 0xe70811ff (0x200) MX[B]
[10] -1 0 0x3ff00000 - 0x3ff003ff (0x400) MX[B]
[11] -1 0 0xe7080000 - 0xe70803ff (0x400) MX[B]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[15] -1 0 0xe7000000 - 0xe707ffff (0x80000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[23] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[24] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[27] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[28] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce4 MX 4000"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD8000000
(--) NV(0): MMIO registers at 0xE4000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...found one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM Model: a3 Serial#: 1197027639
(II) NV(0): Year: 2003 Week: 50
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite
(II) NV(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.633 redY: 0.351 greenX: 0.298 greenY: 0.592
(II) NV(0): blueX: 0.143 blueY: 0.092 whiteX: 0.316 whiteY: 0.337
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) NV(0): #1: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #2: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NV(0): Monitor name: SyncMaster
(II) NV(0): Serial No: HCHWC01416
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) NV(0): config file vrefresh range 50-90Hz not within DDC vrefresh ranges.
(II) NV(0): SyncMaster: Using hsync range of 31.50-64.30 kHz
(II) NV(0): SyncMaster: Using vrefresh range of 50.00-90.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) NV(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) NV(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) NV(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) NV(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) NV(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) NV(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) NV(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) NV(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) NV(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) NV(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) NV(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) NV(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) NV(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) NV(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) NV(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) NV(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) NV(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) NV(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) NV(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) NV(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) NV(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(--) NV(0): Display dimensions: (340, 270) mm
(--) NV(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.1.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[1] 0 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe6004000 - 0xe6005fff (0x2000) MX[B]
[8] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B]
[9] -1 0 0xe6006000 - 0xe60067ff (0x800) MX[B]
[10] -1 0 0xe7082000 - 0xe70820ff (0x100) MX[B]
[11] -1 0 0xe7081000 - 0xe70811ff (0x200) MX[B]
[12] -1 0 0x3ff00000 - 0x3ff003ff (0x400) MX[B]
[13] -1 0 0xe7080000 - 0xe70803ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[16] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[17] -1 0 0xe7000000 - 0xe707ffff (0x80000) MX[B](B)
[18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[25] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[26] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[28] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[30] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xd8000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ImPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 8
(II) 3rd Button detected: disabling emulate3Button
|
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Sat Apr 02, 2005 7:13 pm Post subject: |
|
|
| Code: |
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
|
and there we have it. It can't find the nvidia x driver.... any ideas?
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Mon May 30, 2005 4:49 pm Post subject: back again |
|
|
lol, after another two months I come back to this. It's really time now that I get this working so I can play some Battlefield 1942, or soon it will be Battlefield 2.  I haven't changed a thing since that last post. I've just survived not playing games while using the "nv" driver for functionality's sake. It wasn't that bad without them, actually.  but still, I'm really stuck as to what to do next, so any insight would be much appreciated. Thank you,
-AgtSkippy |
|
| Back to top |
|
|
Nez
n00b
Joined: 30 Jan 2005
Posts: 10
|
| Posted: Sun Jun 05, 2005 3:06 am Post subject: |
|
|
Post your xorg.conf if you don't mind.
I have an nvidia card and mine contains the following snippets
| Code: |
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "glx"
Load "bitmap" # bitmap-fonts
#Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
|
| Code: |
Section "Device"
Option "hw_cursor"
Identifier "Geforce"
Option "NoLogo" "1"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
|
I suggest making yours equivalent to that above and then doing the following:
| Code: | emerge nvidia
emerge nvidia-glx #I'd say this is what you were missing atleast
emerge nvidia-kernel
echo "nvidia" >> /etc/modules.autoload.d/kernel-2.6 #Assuming it's the 2.6 kernel
modprobe nvidia
modules-update
opengl-update nvidia |
Hope that helps |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Sun Jun 05, 2005 12:07 pm Post subject: thanks |
|
|
I'm about to leave for a quick vacation, but I'll be able to SSH in and give that a try, as well as post my xorg.conf. I'll get back to you when I'm through. Thank you.
-Skippy |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Mon Jun 06, 2005 1:58 pm Post subject: |
|
|
Here's my current xorg.conf. I'm about to make those changes you suggested.
| Code: |
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
# FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "SyncMaster"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "NVidia GeForce MX 4000"
Driver "nv"
# Option "RenderAccel" "true"
VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NVidia GeForce MX 4000"
Monitor "SyncMaster"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
[/code] |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Mon Jun 06, 2005 7:03 pm Post subject: |
|
|
Well, after a little trouble getting a successfull ssh-tunnel with vnc, I was able to log in and use the nvidia driver without it crapping on me! no more wacky darwing problems! although, I'm working with it all over VNC. so, Im not completely sure if the problem has dissappeared. A quick lsmod/lspci/dmesg all showed that the nvidia driver/card was being used. I'm not going to celebrate yet until I get back home (only a couple of days). Thank you so much, man. hopefully I'll be playin' battlefield 1942 on linux in a couple of days. I'll let you all know how this thing turns out.
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Mon Jun 06, 2005 7:03 pm Post subject: |
|
|
Well, after a little trouble getting a successfull ssh-tunnel with vnc, I was able to log in and use the nvidia driver without it crapping on me! no more wacky darwing problems! although, I'm working with it all over VNC. so, Im not completely sure if the problem has dissappeared. A quick lsmod/lspci/dmesg all showed that the nvidia driver/card was being used. I'm not going to celebrate yet until I get back home (only a couple of days). Thank you so much, man. hopefully I'll be playin' battlefield 1942 on linux in a couple of days. I'll let you all know how this thing turns out.
_________________
Linux is not the answer, it is the question. The answer is yes... |
|
| Back to top |
|
|
AgtSkippy
n00b
Joined: 10 Aug 2003
Posts: 39
|
| Posted: Mon Jun 13, 2005 11:46 pm Post subject: |
|
|
okay, after a surprise trip last weekend, I'm back in action. What you suggested did not work. I'm still using the nv driver. so, I have two options: 1. emerge -C kde/xwindows/anythinggraphical and start from scratch. OR 2. Hope that a new video card will change things. <-- no, that won't help, but I have to get a new video card anyway so I can play Battlefield 2. I'm guessing I'll just start over with any GUI once I get the new card. Thank you all for the help. I hope no one else has this problem, it's been a real pain.
-Skippy |
|
| Back to top |
|
|
plz.help.me
n00b
Joined: 11 Nov 2005
Posts: 1
|
| Posted: Fri Nov 11, 2005 4:47 am Post subject: plz guys.... help me... |
|
|
| Uh... I'm interested in this discussion... but can someone explain to me how to upgrade an NVIDIA GeForce 2 MX/MX 400?? I realllllly need to update the Open Gl (I switched from an older VGA which does not support Open Gl)... it seems that you guys know how to update the hardware... so can some one plz tell me how to do this?? |
|
| Back to top |
|
|
deepfritz
n00b
Joined: 20 Nov 2005
Posts: 13
|
| Posted: Sun Nov 20, 2005 2:15 pm Post subject: |
|
|
I had the same problem and even worse with this card.
I saw that you use the 66.29 version of driver(same as me before).
I downgrade to 61.11 and i dont have this problem anymore...
But i have another:When i start kde or the default x window manager everything seems ok,but after a little the entire system blocks and only thing functioning is the mouse pointer(even keyboard is blocked).
If someone have knows something i would preciate it.
p.s.I have 2.6.9 kernel version because i get errors when try to compile nvidia-kernel-1.0.6111 whith next kernel versions. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
