View previous topic :: View next topic |
Author |
Message |
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 03, 2005 6:59 pm Post subject: |
|
|
usuń ostatnie dwie linie lub przynajmniej ostatnią z pliku adsl i sprawdź _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 03, 2005 7:01 pm Post subject: |
|
|
mój config wygląda tak:
Code: | user "*******@neostrada.pl"
plugin pppoatm.so
0.35
noipdefault
usepeerdns
defaultroute
persist
noauth
nopcomp
noccp
novj |
_________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 03, 2005 7:32 pm Post subject: |
|
|
ok, zaczne od tego, ze przy starcie systemu wyspuja sie bledy z pliku /etc/modules.autoload.d/kernel-2.6 ze nie moze zaladowac modulu user, noipdefault, usepeerdns i tak do konca tego pliku, pozniej laduje recznie wszystkie potrzebne modulu, czyli uhci atm pppoatm itp itd no i przy pppd call adsl niby wszystko jest ok
Code: | Plugin pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:0.35 |
ale internet nie dziala :/ nic nie chce sie polaczyc |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 03, 2005 7:47 pm Post subject: |
|
|
pokaż:
1) zawartość /etc/modules.autoload.d/kernel-2.6
2) zawartość /etc/ppp/peer/adsl
3) wynik cat /usr/src/linux/.config | grep SPEEDTOUCH
4) zawartość /lib/firmware
próbowałeś robić wg HOWTO, do którego link podawałem? _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 03, 2005 7:53 pm Post subject: |
|
|
Ad1
Code: | cat /etc/modules.autoload.d/kernel-2.6
user "******@neostrada.pl"
plugin pppoatm.so
0.35
noipdefault
usepeerdns
defaultroute
persist
noauth
nopcomp
noccp
novj |
Ad2
Code: | cat /etc/ppp/peers/adsl
user "*****@neostrada.pl"
plugin pppoatm.so
0.35
noipdefault
usepeerdns
defaultroute
persist
noauth
nopcomp
noccp
novj |
Ad3
Code: | cat /usr/src/linux/.config | grep SPEEDTOUCH
CONFIG_USB_SPEEDTOUCH=m |
Ad4
Code: | ls /lib/firmware
speedtch-1.bin speedtch-2.bin |
Tak, robilem krok w krok wedlug twojego hwoto
Code: | lsmod
Module Size Used by
uhci_hcd 27952 0
speedtch 9896 0
usb_atm 13264 2 speedtch
pppoatm 4928 1
ppp_generic 21236 5 pppoatm
slhc 6336 1 ppp_generic
atm 34964 4 usb_atm,pppoatm |
|
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 03, 2005 7:58 pm Post subject: |
|
|
w /etc/modules.autoload.d/kernel-2.6 powinienieś mieć:
i inne rzecz - np. nvidia jeśli używasz - ale to inny temat
zmien zawartość /etc/modules.autoload.d/kernel-2.6 i zrestartuj
Quote: | Tak, robilem krok w krok wedlug twojego hwoto |
chyba niedokładnie _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 03, 2005 7:59 pm Post subject: |
|
|
hehe juz widze co do Ad2 przekopiowalem nie to co trzeba, poprawie i sprawdze |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 03, 2005 8:12 pm Post subject: |
|
|
/etc/ppp/peers/adsl masz dobrze
/etc/modules.autoload.d/kernel-2.6 masz źle _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 03, 2005 8:46 pm Post subject: |
|
|
No tak tak, oczywiscie chodzilo mi o Ad3 i oczywiscie to popralwilem no i dziala, mam jeszcze klopot z przegladarka, ale to juz napisze w innym topicu, dziekuje za pomoc |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 03, 2005 8:47 pm Post subject: |
|
|
nie za ma co _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Tue Jun 07, 2005 11:29 am Post subject: |
|
|
Mam dziwny problem ktory nei wiem jak mam rozwiazac, nawet nie wiem jak to scharakteryzowac, np dzisiaj, przez cala noc bylo wlaczone emerge i ekg (bez trybu graficznego) jak rano wstalem modem dzialal caly czas, emerge dalej cos sciagalo, wylaczylem ekg, wszedlem do trybu graficznego (fvwm) wlaczylem tam w atermie ekg i modem sie rozlaczyl, tzn wszystkie lampki zgasly i zeby uruchomic go jeszcze trzeba zrestartowac system. Nie wiem od czego tojest zalezne, czy jakos od trybu graficznego, czy od tego ze jakis program kozysta z aterma z pseudo konsoli, np teraz jestem w trybie graficznym, mam wlaczona opere i ekg w oddzielnej konsoli (nie w trybie graficznym) i jak narazie neo sie nie rozlacza, czy moze ktos wie co na to poradzic, moze czegos nie wkompilowalem w jajo ?
Pozdrawiam |
|
Back to top |
|
|
rzezioo Apprentice
Joined: 02 Nov 2004 Posts: 260 Location: Szczecin, Poland
|
Posted: Thu Jun 09, 2005 10:35 pm Post subject: |
|
|
nie. to nie powinno sie za zadne frytki zdarzyc. kompletnie lampki zgasly?? nie wiem a czy ten blad jest powtarzalny?? _________________ USE="refrigerator" emerge beer
http://fun.from.hell.pl/2003-05-27/russian_linux.jpg |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Thu Jun 09, 2005 11:43 pm Post subject: |
|
|
No nie wiem, juz mnie to do kur*** doprowadza, czasami moge pracowac przez 2h a czasami co 15m musze jeszcze raz modem wlaczac, zamiast restartu pomaga zabicie pppd, wyladowanie uhci_hcd, zaladownie uhci_hcd jeszcze raz no i pppd call ... moze to cos hardwerowego, jakies konflikty usb ? juz probowale wszystkie, przepinalem modem do innego slota usba, wyjmowalem zbedne karty ... pozatym nie widze w tym zadnej zaleznosci, jak uzywam samego kadu, wszystko jest ok, jak zaczne odpalac jakies programy, to zaczynaja sie problemy, ma ktos jakis pomysl ? |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 10, 2005 6:06 am Post subject: |
|
|
powiedziałbym, że może masz modem wetknięty w USB2.0 - ale ja tak mam i hula...
może modem trefny? wymień, pożycz, sprawdź...
a dostajesz jakis komunikaty w logu ja się to dzieje? _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 10, 2005 1:16 pm Post subject: |
|
|
Jak teraz zajrzale do dmesgf to rzeczywiscie sa tam jakies bledy zwiazane z kontrolerem usb, ale w czasie tej sesji juz kilka razy walczalem i wylaczylem neostrade, wiec nie wiem w ktorym miejscu jest ten wlasciwy blad, jak wieczorem wroce ze szkoly to sprobuje wywolac (jakos) rozlaczenie modemu i wtedy napsize co mi wyplowa |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 10, 2005 1:21 pm Post subject: |
|
|
sprawdź czy na pewno masz dobre USB wkompilowane w jajko
ale ja Ci wogóle działa to raczej tak. _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 10, 2005 6:35 pm Post subject: |
|
|
rozlaczenie
Code: | ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ADSL line is up (160 Kib/s down | 96 Kib/s up)
Machine check events logged
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
uhci_hcd 0000:00:11.2: host system error, PCI problems?
uhci_hcd 0000:00:11.2: host controller halted, very bad!
uhci_hcd 0000:00:11.2: HC died; cleaning up
usb 1-2: USB disconnect, address 2 |
ponowne laczenie sie, zalapalo chbya za 3 razem gdy wpisalem pppd call adsl po przeladowaniu modulu uhci_hcd
Code: | uhci_hcd 0000:00:11.4: remove, state 1
usb usb3: USB disconnect, address 1
uhci_hcd 0000:00:11.4: USB bus 3 deregistered
uhci_hcd 0000:00:11.3: remove, state 1
usb usb2: USB disconnect, address 1
uhci_hcd 0000:00:11.3: USB bus 2 deregistered
uhci_hcd 0000:00:11.2: remove, state 0
usb usb1: USB disconnect, address 1
uhci_hcd 0000:00:11.2: USB bus 1 deregistered
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 5, io base 0x0000d400
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:11.3: irq 5, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:11.4: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:11.4: irq 5, io base 0x0000dc00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: found stage 1 firmware speedtch-1.bin
usb 1-2: found stage 2 firmware speedtch-2.bin
ADSL line is synchronising
ADSL line is up (160 Kib/s down | 96 Kib/s up) |
|
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 10, 2005 6:43 pm Post subject: |
|
|
a pokaż
lsusb -vvv
cat /usr/linux/src/.config | grep USB _________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
Miszczu Apprentice
Joined: 12 Apr 2005 Posts: 177
|
Posted: Fri Jun 10, 2005 6:59 pm Post subject: |
|
|
lsusb -vvv
Code: | Unknown line at line 5568
Unknown line at line 5569
Unknown line at line 5570
Unknown line at line 5571
Unknown line at line 5572
Unknown line at line 5573
Unknown line at line 5574
Unknown line at line 5575
Unknown line at line 5576
Unknown line at line 5577
Unknown line at line 5578
Unknown line at line 5579
Unknown line at line 5580
Unknown line at line 5581
Unknown line at line 5582
Unknown line at line 5583
Unknown line at line 5584
Unknown line at line 5585
Unknown line at line 5586
Unknown line at line 5587
Unknown line at line 5588
Unknown line at line 5589
Unknown line at line 5590
Unknown line at line 5591
Unknown line at line 5592
Unknown line at line 5593
Unknown line at line 5594
Unknown line at line 5595
Unknown line at line 5596
Unknown line at line 5597
Unknown line at line 5598
Unknown line at line 5599
Unknown line at line 5600
Unknown line at line 5601
Unknown line at line 5602
Unknown line at line 5603
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.12-rc4-mm1 uhci_hcd
iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
iSerial 1 0000:00:11.4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.12-rc4-mm1 uhci_hcd
iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
iSerial 1 0000:00:11.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 002: ID 06b9:4061 Alcatel Telecom Speed Touch ISDN or ADSL Modem
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x06b9 Alcatel Telecom
idProduct 0x4061 Speed Touch ISDN or ADSL Modem
bcdDevice 4.00
iManufacturer 1 THOMSON
iProduct 2 Speed Touch 330
iSerial 3 000E506A89D1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 147
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 16
bInterval 50
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 640
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 960
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 8
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 8
bInterval 0
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.12-rc4-mm1 uhci_hcd
iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
iSerial 1 0000:00:11.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US) |
cat /usr/src/linux/.config | grep USB
Code: | CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_EGALAX=m
CONFIG_USB_MON=y
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m |
Zachaszowane z configa wyzej usunelem |
|
Back to top |
|
|
peka l33t
Joined: 16 Mar 2005 Posts: 773 Location: Płońsk, Poland
|
Posted: Fri Jun 10, 2005 7:13 pm Post subject: |
|
|
poza tymi unknown line wygląda OK
ja mam tak:
Code: | # USB support
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# Miscellaneous USB options
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# USB Device Class drivers
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; se
e USB_STORAGE Help for more information
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# USB Input Devices
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# USB Imaging devices
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# USB Multimedia devices
# CONFIG_USB_DABUSB is not set
# Video4Linux support is needed for USB Multimedia device support
# USB Network Adapters
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# USB port drivers
# USB Serial Converter support
# CONFIG_USB_SERIAL is not set
# USB Miscellaneous drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set
# USB ATM/DSL drivers
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# USB Gadget Support
# CONFIG_USB_GADGET is not set |
spróbuj pokombinować z jądrem. Jeśli nic nie da to może sprzęt? Ale nie chcę rozstrzygać.
bo w fstab coś takiego masz:
none /proc/bus/usb usbfs defaults 0 0
?
no i może DEV jeszczeCONFIG_USB_DEVICEFS=y
# CONFIG_USB_HIDDEV is not set
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
ale już zgaduję
_________________ p3k4
Seize the time, Meribor. Live now; make now always the most precious time. Now will never come again...
Jean-Luc Picard, Star Trek TNG - The Inner Light |
|
Back to top |
|
|
|