View previous topic :: View next topic |
Author |
Message |
blursmurf n00b
Joined: 06 Jan 2003 Posts: 45
|
Posted: Wed Sep 22, 2004 3:16 pm Post subject: |
|
|
hi there... need some help... i compiled xorg 6.7... haven been hanging out in forums and thus missed 6.8... anywayz... if i enable (dri/drm ??? forgot or was it mtrr) under xorg.conf to enable 3d accelaration, my x server will USUALLY hang when i kill it or shut it down... if it's disabled, then nother bad will happen..... anywayz, i'm using an ati radeon 9700 mobility card and the fglrx drivers.... also using the radeon framebuffer.... help please =) thanks in advance |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Wed Sep 22, 2004 3:24 pm Post subject: |
|
|
@blursmurf: Does the driver actually recognise your card (check the Xorg log)? I thought the Mobility 9700 still wasn't supported. In addition, the radeon framebuffer will often conflict with the fglrx driver, causing lockups when shutting down X or switching to a console with CTRL-ALT-F1 etc. Try using the VESA framebuffer instead.
@SirPreme: try setting "UseInternalAGPGART" to "no" then. This makes it use the kernel AGP support rather than the drivers, which has always been a bit iffy on KT400s. As I said earlier, you might want to try a 2.6 kernel as well, it has more up to date AGP support than 2.4.
Quote: | Is there any possibility to scale down the frequency or something like that? What can I do? |
There's an option in the kernel config to enable the PowerNow! functionality for XP-M processors (at least in 2.6, I don't know about 2.4), and you can then emerge a daemon to control CPU speed (powernowd is one, there are others) or do it manually via a /proc entry. I don't know how much help this would be though, because it would typically switch to the highest frequency anyway when you started a game. _________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
vord n00b
Joined: 15 Nov 2003 Posts: 31
|
Posted: Wed Sep 22, 2004 3:27 pm Post subject: |
|
|
i followed this https://forums.gentoo.org/viewtopic.php?p=1566763 other guide, and posted my problem with it at the end of the thread.
subsequently i tried the guide you mentioned and my problem with it is as follows:
Code: | X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux uranium 2.4.27 #13 Wed Sep 22 13:23:54 CDT 2004 i686
Build Date: 22 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 22 13:49:42 2004
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 7
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
|
again this is with 6.8.0-r1, as it seems that the ati-binary drivers will fix nothing, therefore there is no reason to rollback. however, if someone doesnt respond to this in the next few hours, i will likely try it anyway.
here is xorg.conf, per your request:
Code: | Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
Load "dri"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons"
EndSection
Section "Monitor"
Identifier "My Monitor"
HorizSync 28-96
VertRefresh 50-62
EndSection
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
/var/log/Xorg.0.log available here: http://vord.rsc.cx/Xorg.0.log _________________ --vordhosbn |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Wed Sep 22, 2004 4:31 pm Post subject: |
|
|
Quote: | drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed |
That's from your Xorg logfile. I'm not as familiar with the "radeon" driver as with the "fglrx" driver, but that usually indicates a problem, even though the third open attempt succeeds. How is your kernel AGP support configured? Are the correct modules loaded etc? Are there any AGP related errors in your "dmesg" output? Does setting any of the options listed in "man radeon" make a difference? Have you compiled Xorg with your non-hardened gcc? _________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
kassah n00b
Joined: 26 Jun 2003 Posts: 12 Location: Portland, OR
|
Posted: Wed Sep 22, 2004 4:42 pm Post subject: |
|
|
Here's the problem I have... Used to be if I did startx with root... or ran gdm from root (not init script)... it wouldn't do this... but then I ran fglrxconfig script and now it does it all the time.
(II) fglrx(0): PCI bus 1 card 0 func 0
(EE) fglrx(0): Given depth ( is not supported by fglrx driver
(EE) fglrx(0): PreInitVisual failed
(EE) fglrx(0): R200PreInit failed
(II) fglrx(0): === [R200PreInit] === end
(II) UnloadModule: "fglrx"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
my conf is a very simple conf... made by Xorg -configure and edited to have fglrx where ati was. |
|
Back to top |
|
|
giannifive n00b
Joined: 29 Jan 2004 Posts: 50 Location: Chicago, IL
|
Posted: Wed Sep 22, 2004 5:02 pm Post subject: |
|
|
vord: Your signal 11 problem looks similar to the problems jfbilodeau and I are having: there is no clear error reported in Xorg.0.log, then the server segmentation faults.
Your Xorg.0.log file is very short, though, and it looks like the server crashes before fglrx loads. So perhaps your problem is a bit different.
In any case, I would like to get to the bottom of this "xorg + ati-drivers" segfault issue... |
|
Back to top |
|
|
vord n00b
Joined: 15 Nov 2003 Posts: 31
|
Posted: Wed Sep 22, 2004 7:16 pm Post subject: |
|
|
i wasnt aware that a segfault was occuring ... where is this indicated? _________________ --vordhosbn |
|
Back to top |
|
|
giannifive n00b
Joined: 29 Jan 2004 Posts: 50 Location: Chicago, IL
|
Posted: Wed Sep 22, 2004 7:57 pm Post subject: |
|
|
vord: It says signal 11. According to "kill -l":
Code: | 1) SIGHUP 2) SIGINT 3) SIGQUIT 4) SIGILL
5) SIGTRAP 6) SIGABRT 7) SIGBUS 8) SIGFPE
9) SIGKILL 10) SIGUSR1 11) SIGSEGV 12) SIGUSR2
13) SIGPIPE 14) SIGALRM 15) SIGTERM 17) SIGCHLD
18) SIGCONT 19) SIGSTOP 20) SIGTSTP 21) SIGTTIN
22) SIGTTOU 23) SIGURG 24) SIGXCPU 25) SIGXFSZ
26) SIGVTALRM 27) SIGPROF 28) SIGWINCH 29) SIGIO
30) SIGPWR 31) SIGSYS 35) SIGRTMIN 36) SIGRTMIN+1
37) SIGRTMIN+2 38) SIGRTMIN+3 39) SIGRTMIN+4 40) SIGRTMIN+5
41) SIGRTMIN+6 42) SIGRTMIN+7 43) SIGRTMIN+8 44) SIGRTMIN+9
45) SIGRTMIN+10 46) SIGRTMIN+11 47) SIGRTMIN+12 48) SIGRTMIN+13
49) SIGRTMIN+14 50) SIGRTMAX-14 51) SIGRTMAX-13 52) SIGRTMAX-12
53) SIGRTMAX-11 54) SIGRTMAX-10 55) SIGRTMAX-9 56) SIGRTMAX-8
57) SIGRTMAX-7 58) SIGRTMAX-6 59) SIGRTMAX-5 60) SIGRTMAX-4
61) SIGRTMAX-3 62) SIGRTMAX-2 63) SIGRTMAX-1 64) SIGRTMAX |
that's "SIGSEGV" or segmentation violation. |
|
Back to top |
|
|
vord n00b
Joined: 15 Nov 2003 Posts: 31
|
Posted: Wed Sep 22, 2004 8:30 pm Post subject: |
|
|
i see. _________________ --vordhosbn |
|
Back to top |
|
|
jfbilodeau n00b
Joined: 12 Sep 2004 Posts: 39 Location: Ottawa, Canada
|
Posted: Wed Sep 22, 2004 10:49 pm Post subject: Woo hoo! I found an error! |
|
|
Hey all,
I finally manage to get X.org.0.log to cough up an error while turning UserInternalAGPGART to 'yes'. Here it is:
Code: |
[...]
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
[...]
|
Does that give anyone a clue as to why I'm getting unresolved symbols for glX? (No, I haven't disable OpenGL in my Make.conf...).
Thanks!
J-F |
|
Back to top |
|
|
sr20seth n00b
Joined: 04 Nov 2003 Posts: 55 Location: Carrollton, VA
|
Posted: Wed Sep 22, 2004 11:33 pm Post subject: |
|
|
I had trouble with X/ATI/unresolved symbols when compiling with 3.4. I ran gcc-config 1, then emerge xorg-x11 ati-drivers.
After that everything was peachy again. |
|
Back to top |
|
|
amulius n00b
Joined: 21 Sep 2004 Posts: 5
|
Posted: Thu Sep 23, 2004 1:51 am Post subject: |
|
|
vord wrote: | if someone has a way of getting xorg-x11-6.8.0-r1 to work with radeon mobility m6 in 2.4.27, id like to hear it. |
Try this
Rage3d.com/board is always a good place to seek help for radeon linux help.
Edit: Nevermind what I said, i was tired when i posted this.
both of you seem to be having compiling problems in some way or another =p |
|
Back to top |
|
|
jfbilodeau n00b
Joined: 12 Sep 2004 Posts: 39 Location: Ottawa, Canada
|
Posted: Thu Sep 23, 2004 10:10 am Post subject: I think we're onto something now... |
|
|
sr20seth: Thanks for the suggestion. I think we're onto something now.
I still can't start X with GLX. However, after running 'gcc-config 1', I can now compile ati-drivers-3.9.0-r1. Originally, I could only compile ati-drivers-3.12.0 in the unstable tree.
I've recompiled xorg-x11, ati-drivers and the kernel (since the new module would not load). Is there something else I should look at recompiling?
Also, what does gcc-config do exactly?
Thanks. I think we'll get GLX working eventually! |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Thu Sep 23, 2004 10:19 am Post subject: |
|
|
gcc-config just switches between different major versions of gcc that you might have installed. If you run gcc-config -l, it'll show you which versions the numbers correspond to. Eg; Code: | [1] i686-pc-linux-gnu-3.3.4
[2] i686-pc-linux-gnu-3.4.2 |
_________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
jfbilodeau n00b
Joined: 12 Sep 2004 Posts: 39 Location: Ottawa, Canada
|
Posted: Thu Sep 23, 2004 10:55 am Post subject: |
|
|
Is there an actually OpenGL library (ie: Mesa), or does the ATI driver provide that library?
I'm trying to figure out which lib I might be missing |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Thu Sep 23, 2004 11:25 am Post subject: |
|
|
The libraries for the ATI driver should be stored under /usr/lib/opengl/ati/lib. I can't think why they wouldn't be there. Were there any other errors in that log you posted? _________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
VisionD Apprentice
Joined: 21 Aug 2003 Posts: 198 Location: Cologne/Germany
|
Posted: Thu Sep 23, 2004 11:35 am Post subject: |
|
|
Hi there,
i hope i am right in this thread because my problem isn´t excactly about the driver.
I am having problems with my mobile 9600 and i want to try some configurations with my xorg.conf.
What would be an easy (hopefully automatic) way to figure out the modelines i could use for my widescreen display (using a DELL Inspiron 8600).
There are some modelines in the forum but none of them worked correctly for me.
Thx in advance.
Greetz
VisonD _________________ My systems:
1. Athlon XP 2,4 GHz, 512 MB RAM, Radeon 9700 Pro GraCa
2. Dell Inspiron 8600, 1.5GHz Centrino, 512 MB RAM, Radeon 9600 Mobile GraCa |
|
Back to top |
|
|
jfbilodeau n00b
Joined: 12 Sep 2004 Posts: 39 Location: Ottawa, Canada
|
Posted: Thu Sep 23, 2004 11:39 am Post subject: |
|
|
Thanks again for your help Wedge_.
Wedge_ wrote: | The libraries for the ATI driver should be stored under /usr/lib/opengl/ati/lib. I can't think why they wouldn't be there. Were there any other errors in that log you posted? |
I couldn't find any other errors. The ATI GL libs are there.
The only thing I can see is that I did not compile a package properly, and I'm trying to determine which. Is there something that would disable OpenGL in either xorg or the ATI drivers? |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Thu Sep 23, 2004 11:47 am Post subject: |
|
|
Quote: | The only thing I can see is that I did not compile a package properly, and I'm trying to determine which. Is there something that would disable OpenGL in either xorg or the ATI drivers? |
I can't think of anything that would do that. It's possibly down to the compiler you're using as you mentioned above, or it may be something to do with your USE flags. _________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
criis n00b
Joined: 07 Sep 2004 Posts: 49 Location: Copenhagen, Denmark
|
Posted: Thu Sep 23, 2004 12:11 pm Post subject: |
|
|
vord wrote: | rolling back only makes sense for those people who have a card supported by the binary drivers, if i understand correctly. |
Hmm. Seems I didn't really think before I posted. Sorry about that. |
|
Back to top |
|
|
SirPreme n00b
Joined: 19 Aug 2004 Posts: 25
|
Posted: Thu Sep 23, 2004 1:32 pm Post subject: |
|
|
"@SirPreme: try setting "UseInternalAGPGART" to "no" then. This makes it use the kernel AGP support rather than the drivers, which has always been a bit iffy on KT400s. As I said earlier, you might want to try a 2.6 kernel as well, it has more up to date AGP support than 2.4.
Quote:
"Is there any possibility to scale down the frequency or something like that? What can I do?"
There's an option in the kernel config to enable the PowerNow! functionality for XP-M processors (at least in 2.6, I don't know about 2.4), and you can then emerge a daemon to control CPU speed (powernowd is one, there are others) or do it manually via a /proc entry. I don't know how much help this would be though, because it would typically switch to the highest frequency anyway when you started a game."
This is what I did:
1) I changed to kernel 2.6
2) I used cpuspeedy and set the cpu frequency to the lowest avaible option.
Result:
I had the same problems.
What I really meant was if I could scale the frequency of the GPU. ??
I will try to use the external AGPGART modules soon.
One more think that seemed important for me: If I have a hangup in i. e. tuxracer, the music plays on without any problems. |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Thu Sep 23, 2004 2:05 pm Post subject: |
|
|
Quote: | What I really meant was if I could scale the frequency of the GPU. ?? |
Nope, there aren't any clocking tools for Radeons under Linux, as far as I know anyway. _________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
SirPreme n00b
Joined: 19 Aug 2004 Posts: 25
|
Posted: Thu Sep 23, 2004 8:27 pm Post subject: |
|
|
I set UseInternalAGPGART to NO, but it didn't help... |
|
Back to top |
|
|
jfbilodeau n00b
Joined: 12 Sep 2004 Posts: 39 Location: Ottawa, Canada
|
Posted: Thu Sep 23, 2004 9:50 pm Post subject: |
|
|
Hum.... I tried to disable DRI and enable GLX, and now, it works. It seems that fglrx will work either with DRI or GLX enabled, but not both.
However, with GLX enable, I get terrible performance with glxgears.
Scanning the log, I've found further 'unresolved symbols'. Here are some interesting lines in Xorg.0.log:
Code: |
[...]
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xf0000000 FBMappedSize: 0x04000000
(==) fglrx(0): Write-combining range (0xf0000000,0x4000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 7419
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMalloc from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMalloc from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMalloc from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMalloc from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmFree from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMalloc from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol drmMalloc from module /usr/X11R6/lib/modules/linux/libfglrxdrm.a is unresolved!
Symbol DRIGetDrawableInfo from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpBase from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpSize from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpEnable from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpRelease from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpDeviceId from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpVendorId from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpGetMode from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol DRIGetDeviceInfo from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
(II) Setting vga for screen 0.
[...]
|
Note that I don't get these errors if I enable DRI but not GLX. Also, I don't have the file /usr/X11R6/lib/modules/drivers/fglrx_drv.o. Why would that be? I'm getting terribly confused with all this...
And further ideas?
Thanks again for your help on this!
edit: I have option "no_accel" and "no_dri" set to "no"
Last edited by jfbilodeau on Thu Sep 23, 2004 10:08 pm; edited 1 time in total |
|
Back to top |
|
|
sr20seth n00b
Joined: 04 Nov 2003 Posts: 55 Location: Carrollton, VA
|
Posted: Thu Sep 23, 2004 10:05 pm Post subject: |
|
|
sorry I forgot to mention that i had to recompile the kernel with gcc 3.3.x also. I believe that was all i had to recompile. |
|
Back to top |
|
|
|