View previous topic :: View next topic |
Author |
Message |
needlern1 Guru
Joined: 16 Jul 2002 Posts: 376 Location: Marietta, Ga 30068
|
Posted: Fri Oct 25, 2002 10:34 pm Post subject: mplayer won't start |
|
|
Several months back I did an emerge on mplayer and some version installed. I did a cli for mplayer and it fired right up. Did not config anything.
I recently did an rsync and an emerge on the most recent ebuild of mplayer. Nothing I did would do anything. Which is still the case. I unmerged the the update and have installed an older version (seen below).
When I enter the command mplayer from an xterm and hit enter, zip happens. I have tried configuring /etc/mplayer.conf with vo=xv and sla with the same results.
I've searched google and this list; read the mplayer FAQ and manual ( the parts I had a chance of understanding )
I'm running gentoo 1.2, gcc 2.95.3.
It would be a big help if someone would point me to a plain english howto or to a typical config file.
On entering the command 'mplayer' with or without anything following it, I get the following:
MPlayer 0.90pre6-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
CPU: Advanced Micro Devices Duron SF Spitfire (Family: 6, Stepping: 1)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
/usr/share/mplayer/mplayer.conf(65): option without parameter
TIA, Bill |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Fri Oct 25, 2002 10:50 pm Post subject: |
|
|
Have you had a look at the config file it mentions? The 65 looks like a line number, so try commenting out or changing whatever is on that line and run mplayer again. |
|
Back to top |
|
|
needlern1 Guru
Joined: 16 Jul 2002 Posts: 376 Location: Marietta, Ga 30068
|
Posted: Sat Oct 26, 2002 10:12 am Post subject: |
|
|
Sorry, Wedge_. Yes I had. Line 65 is in the languages section and is specifically:
Code: | ##
## Multiple languages are available :)
##
## Hungarian igen nem
English yes no
## German ja nein
## Spanish si no
## Binary 1 0
##
## You can also use spaces and/or tabs.
##
|
the English line, which I uncommented. Thanks, Bill
Edit - 10/29: I just emereged the latest edition, did:
Code: | mv /etc/._cfg0000_mplayer.conf mplayer.conf |
From cli ran "mplayer". Nothing. Edited ~/.mplayer.config with addition of:
From cli ran "mplayer" and it fired right up. The difference from my initial post was I did not try to configure anything in the /etc/mplayer.conf file, only the ~/.mplayer.config file. Bill |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|