View previous topic :: View next topic |
Author |
Message |
bläk-kahr n00b
Joined: 19 Sep 2002 Posts: 8
|
Posted: Thu Oct 10, 2002 5:03 pm Post subject: Sharp Zaurus usbdnet |
|
|
Hallo
Is anyone able to help with setting ethernet over USB to my Zaurus?
I have followed the instructions at
http://www.ruault.com/Zaurus/ethernet-over-usb-howto.html
in order to set up an ethernet over USB connection between my Zaurus and my gentoo box. (vanilla-sources for 2.4.19 and corresponding usbdnet patch)
It doesn't work for me. I plug my Zaurus in and nothing. I don't know how to debug this and hope that someone can see a problem somewhere and help:
loaded modules
------------------
Module Size Used by Tainted: P
usbdnet 15196 0 (unused)
usb-uhci 23276 0 (unused)
usbcore 61952 1 [usbdnet usb-uhci]
dmesg:
-------
usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
v0.4b sl@lineo.com, tbr@lineo.com
usbdnet.c: v0.4b sl@lineo.com, tbr@lineo.com
usbdnet.c: USB Host to Device Network - for Linux USB Devices using MDLM/CDC
usb.c: registered new driver usbdnet
and when I plug my camera in:
-----------------------------------
hub.c: USB new device connect on bus2/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x4a9/0x3048) is not claimed by any active driver.
But as I said, with the Zaurus he doesn't want to know?
Does anyone have any ideas how to debug this, to find out what's wrong?
Thanks
--Ben |
|
Back to top |
|
|
llornkcor n00b
Joined: 11 Oct 2002 Posts: 3
|
Posted: Fri Oct 11, 2002 1:27 pm Post subject: |
|
|
what does ifconifg -a tell you?
did you run something this?
ifconfig usb0 192.168.129.200 netmask 255.255.255.0 broadcast 192.168.129.255 up
route add 192.168.129.201 usb0 |
|
Back to top |
|
|
bläk-kahr n00b
Joined: 19 Sep 2002 Posts: 8
|
Posted: Sat Oct 12, 2002 11:53 am Post subject: |
|
|
llornkcor wrote: | what does ifconifg -a tell you?
did you run something this?
ifconfig usb0 192.168.129.200 netmask 255.255.255.0 broadcast 192.168.129.255 up
route add 192.168.129.201 usb0 |
The usb ethernet device isn't listed. There is no mention of the Zaurus in the logs when I put it in the cradle.
--Ben |
|
Back to top |
|
|
PorkySpine n00b
Joined: 31 Jan 2003 Posts: 13 Location: Portugal
|
|
Back to top |
|
|
|