View previous topic :: View next topic |
Author |
Message |
Neo Guest
|
Posted: Sat May 11, 2002 3:47 pm Post subject: Help with lm_sensors |
|
|
Hi,
When I type " sensors-detect" I get these messages:
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 00:07.4: VIA Technologies VT82C686 Apollo ACPI
Use driver `i2c-riva' for device 01:00.0: GeForce2 MX
Probe succesfully concluded
We will now try to load each adapter module in turn.
Load `i2c-viapro' (say NO if built into your kernel)? (YES/no):
modprobe: Can't locate module i2c-viapro
Loading failed ()... skipping.
My question is where can I get this module? I went to /lib/modules/ 2.4.19-r1/kernel/drivers/i2c/ and I found none "i2c-viapro.o".
Thanks for your help. |
|
Back to top |
|
|
Psychephylax n00b
Joined: 10 May 2002 Posts: 44 Location: Smithtown, NY
|
Posted: Sat May 11, 2002 3:56 pm Post subject: |
|
|
I found this on a different board using Google about the missing module
Try 'depmod'. Then 'modprobe -l' and make sure i2c-viapro is listed.
Hope that helps _________________ Stupidity, like hydrogen, is one of the basic building blocks of the Universe. |
|
Back to top |
|
|
Neo Guest
|
Posted: Sat May 11, 2002 4:31 pm Post subject: |
|
|
Hi,
I did what you said "depmod" then "modprobe -l" but i2c-viapro is still not listed. I only get these lines:
...
...
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-algo-bit.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-algo-pcf.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-core.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-dev.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-elektor.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-elv.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-philips-par.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-proc.o
/lib/modules/2.4.19-r1/kernel/drivers/i2c/i2c-velleman.o
/lib/modules/2.4.19-r1/kernel/drivers/net/dummy.o
...
...
...
Psychephylax wrote: | I found this on a different board using Google about the missing module
Try 'depmod'. Then 'modprobe -l' and make sure i2c-viapro is listed.
Hope that helps |
|
|
Back to top |
|
|
rogue Tux's lil' helper
Joined: 15 May 2002 Posts: 99 Location: Falls Church, VA
|
Posted: Wed May 15, 2002 3:44 am Post subject: i had the same problem |
|
|
i had the same problem as you (different chipset though), but i think i found the solution. When you emerge lm_sensors, if you don't have i2c support in your kernel, then it doesn't create the i2c-**** modules needed for your chipsets. Make modules for i2c in the kernel (it's in character devices->i2c or something like that), and then re-emerge lm_sensors, and then you can run sensors-detect and it should be able to tell you what you need to add to your modules.autoload and modules.d/aliases file. This worked for me, hope it works for you. _________________ (rob) |
|
Back to top |
|
|
|