View previous topic :: View next topic |
Author |
Message |
Deever Veteran
Joined: 06 Jul 2002 Posts: 1354 Location: Zürich / Switzerland
|
Posted: Wed Aug 07, 2002 11:17 pm Post subject: sound und fernsehen... |
|
|
Hey Amigos, wie geht's?
Also der sound und die tv-karte funzen immer noch net unter gentoo.
Alsa liefert mir seit neustem net mal mehr fehlermeldungen, nur wenn ich den rechner runterfahre, meldet er rot: Alsa driver not loaded.
Und beim start von kde meckert der wie bisher: Can't open /dev/dsp undso weiter.
Wenn ich fernsehen will, egal ob als user oder root, krieg ich folgende meldung: Code: | This is xawtv-3.73, running on Linux/i686 (2.4.18.gentoo)
can't open /dev/v4l/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/v4l/video0: No such file or directory
v4l: open /dev/v4l/video0: No such file or directory
no video grabber device available |
Ich vermute, das liegt an der /etc/modules.conf, aber ich steig da net wirklich durch!
Meinen kernel hab ich nach lektüre einiger postings ohne oss kompiliert, um alsa nutzen zu können. Auch hab ich mir alsa-driver (und sogar die andere alsa pakete) nach dem neubacken des kernels neu geemerget. Das will aber trotzdem net funzen. ;(
Hier meine /etc/modules.conf: Code: | ### update-modules: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.$
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
### update-modules: end processing /etc/modules.d/alsa |
Die /etc/modules.d/alsa hab ich soweit ich konnte modifiziert, aber ich hab eigentlich kein plan davon!!
Die soundkarte verwendet nen via vt82c686 chipsatz, hab ich im kernel aktiviert.
Zur fernsehkarte hab ich mal was aus nem forum eingetragen, das hat aber net gefunzt!
Meine tvkarte ist eine pctv pro von pinnacle systems.
Bitte helft mir...
Vielen Dank
dev |
|
Back to top |
|
|
Deever Veteran
Joined: 06 Jul 2002 Posts: 1354 Location: Zürich / Switzerland
|
Posted: Thu Aug 08, 2002 2:15 pm Post subject: |
|
|
Naja, war wohl schon nen bisschen spät gestern...ich hab die /etc/modules.d/alsa einfach mit ._cfg0000_alsa überschrieben! So bringts die configfile protection natürlich auch wieder nicht, wenn ein idiot vorm pc sitzt!!
Anyway, die alte alsa hat sowieso net gefunzt, egal was ich da geändert hab, habt ihr das hingekriegt?
dev |
|
Back to top |
|
|
Deever Veteran
Joined: 06 Jul 2002 Posts: 1354 Location: Zürich / Switzerland
|
Posted: Thu Aug 08, 2002 3:35 pm Post subject: |
|
|
Also mit freundlicher unterstützung eines kumpels (den ich hier zu seinem wohl net nennen möchte) habe ich die modules.d/alsa nun bearbeiten können. Es sollte nun eigentlich alles funzen, aber ich hab immer noch kein saund!!!
Code: | sh-2.05a# /sbin/lsmod
Module Size Used by Not tainted
snd-pcm-oss 37988 1
snd-via686 7908 2
snd-ac97-codec 27748 0 [snd-via686]
snd-pcm 54976 0 [snd-pcm-oss snd-via686]
snd-timer 11264 0 [snd-pcm]
snd-mpu401-uart 3248 0 [snd-via686]
snd-rawmidi 13984 0 [snd-mpu401-uart]
snd-seq-device 4396 0 [snd-rawmidi]
snd-mixer-oss 11168 1 (autoclean) [snd-pcm-oss]
snd 27720 0 (autoclean) [snd-pcm-oss snd-via686 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd-mixer-oss]
3c59x 27656 1
sh-2.05a# ls /dev/sound/dsp
/dev/sound/dsp
sh-2.05a# ??? |
Dem arts hab ich das /dev/sound/dsp gerät vertraut gemacht. Auch hab ich das arts ausgabe plugin beim xmms aktiviert, aber kein sound. Und wenn ich "stop" drücke oder der song fertig ist, kackts mit nem segfault ab!!!
Auch der mplayer hat keinen sound, kann also net an xmms liegen die prob mit dem sound!
Habt ihr sonst noch plan/pläne, was ich anstellen könnte? Ich hab (noch) net so plan davon!!
thx
dev |
|
Back to top |
|
|
thor n00b
Joined: 18 Jul 2002 Posts: 25 Location: m-ger
|
Posted: Thu Aug 08, 2002 6:33 pm Post subject: |
|
|
maalzeit
vielleicht ne doofe frage, aber stehen die soundmodule bei dir in der /etc/modules.autoload drinnen?
was sagt denn 'lsmod' oder 'cat /proc/modules'? _________________ good things come to those who ....................... wait |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|