Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Adsl baut Verbindung auf,aber nix geht:-(
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Udo
Tux's lil' helper
Tux's lil' helper


Joined: 31 Jul 2002
Posts: 105
Location: Dortmund

PostPosted: Sun Aug 04, 2002 2:53 pm    Post subject: Adsl baut Verbindung auf,aber nix geht:-( Reply with quote

Hallo,ich bin am verzweifeln.
Vielleicht weiß hier ja jemand Rat.

Ich hatte emerge --update world gemacht und dabei den 2.4.19 Kernel bekommen.
Danach hatte ich ihn mit der alten Configdatei kompiliert und noch nvidia und alsa emergt.
Zuletzt habe ich noch ein emerge -c ausgeführt.

Nach dem Reboot habe ich auch wieder KDE und Sound wie gewohnt,aber wenn ich adsl-start eingebe, bekomme ich ab und zu ein Time out oder wenn Connect dort steht,bekomme ich nix aus dem Netz. Also auch nichts mit emerge runtergesaugt und auch lynx lässt sich nicht bewegen eine Seite anzuzeigen.

Das System verhält sich als wenn kein Nameserver richtig wär,aber die sind wie vorher eingetragen.
Ich dachte es liegt am Kernel,aber selbst der 2.4.18 der vorher benutz wurde hat jetzt die gleichen macken.
Also eine Verbindung wird aufgebaut,aber ich bekomme kein Seite(z.b.www.Gentoo.de) geladen.
Lag es am emerge -c?
Nach den Dokus habe ich alle Einstellungen richtig
Alle DNS sind korrekt eingetragen.
iconfig gibt normale werte wie vorher aus,also eht0 ist aktiv und pppoe auch.
Adsl Status sagt das eine verbindung besteht,aber trotzdem geht nix.
Auch ein neues Einrichten mit adsl-setup hat nix gebracht.
Hat hier jemand ne Ahnung wo der Hacken steckt?
Wär echt dankbar.
Gruß Udo
_________________
Aller Anfang ist schwer,aber nur für Anfänger.
Back to top
View user's profile Send private message
mglauche
Retired Dev
Retired Dev


Joined: 25 Apr 2002
Posts: 564
Location: Germany

PostPosted: Sun Aug 04, 2002 3:00 pm    Post subject: Reply with quote

Hmm, schau mal in die logfiles: /var/log/ppp.log /var/log/messages

Was auch geht: adsl-connect aufrufen, dort gibts mehr informationen, wenn und ob etwas abgeht.

"ifconfig" aufrufen, und schauen, ob ppp0 da ist

wenn ppp0 da, aber immer noch kein inet, dann poste bitte mal die zeilen von ifconfig ppp0 und route -n
Back to top
View user's profile Send private message
Udo
Tux's lil' helper
Tux's lil' helper


Joined: 31 Jul 2002
Posts: 105
Location: Dortmund

PostPosted: Sun Aug 04, 2002 3:45 pm    Post subject: Noch keine lösung Reply with quote

Also,ich habe auf meinen System leider unter var/log... keine Dateien namens ppp.log oder messages aus machen können.
Bei Suse hab ich sie dort auch immer gefunden.
wer weis warum diese nicht unter Gentoo generiert wurden.

ich habe mal ifconfig und route -n ausgeführt und das bekommen:
Ich kann da leider nix entdecken.

localhost root # ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:7D:7D:61:11
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:545 (545.0 b) TX bytes:540 (540.0 b)
Interrupt:5 Base address:0xf000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200 (200.0 b) TX bytes:200 (200.0 b)

ppp0 Link encap:Point-to-Point Protocol
inet addr:195.138.42.50 P-t-P:10.1.1.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:30 (30.0 b) TX bytes:30 (30.0 b)

Localhost root # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.1.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 1 0 0 eth0
lo

Danke schon einmal für deine Antwort
Gruß Udo
_________________
Aller Anfang ist schwer,aber nur für Anfänger.
Back to top
View user's profile Send private message
Tharkun
Tux's lil' helper
Tux's lil' helper


Joined: 02 May 2002
Posts: 106

PostPosted: Sun Aug 04, 2002 5:37 pm    Post subject: Reply with quote

Du sollst dem Interface, welches zu deinem DSL Modem führt ja auch eigentlich keine IP geben. Und wo kommt diese komische default route her ? Die default route hat auf das ppp0 interface zu zeigen.

Hast du einen syslogger installiert ? (sysklogd, syslog-ng oder metalog ?) Wenn ja, hast du sie richtig eingestellt ? Wenn nicht ist klar wieso du keine logs hast :)
Back to top
View user's profile Send private message
Udo
Tux's lil' helper
Tux's lil' helper


Joined: 31 Jul 2002
Posts: 105
Location: Dortmund

PostPosted: Sun Aug 04, 2002 6:02 pm    Post subject: Jo Reply with quote

Also ich habe Metalog genommen,weil es im bei der Installation so vorgeschlagen wurde.Nur war mir nicht klar,das ich da was einrichten mussste.
Wenn meine einstellungen nicht richtig sind,weiss ich nicht warum.
Bei den Schritten in der Installationsanleitung habe ich nichts ausgelassen und da funktionierte es,ohne Probleme.
Warum jetzt alles falsch ist kann ich nicht nachvolziehen.

Ich habe mal Testweise ein ping zu meinem Laptop geschickt,das geht.
Nur wenn ich eine Adresse außerhalb pinge,geht es nicht.
Ich bin nochmal die Docu durchgegeangen und habe irgendwie nicht verstanden,was dazu führen konnte das meine routing sache nicht mehr richtig ist.
Das einzig fatale war wohl doch der emerge -c,der muss alles versaut haben.

Wo und was an configs muss ich denn nu wieder ändern das ich Erfolg habe?
Links zu den Passenden Dokus währe hilfreich.
Grus Udo und danke
_________________
Aller Anfang ist schwer,aber nur für Anfänger.
Back to top
View user's profile Send private message
mglauche
Retired Dev
Retired Dev


Joined: 25 Apr 2002
Posts: 564
Location: Germany

PostPosted: Mon Aug 05, 2002 5:34 pm    Post subject: Reply with quote

das problem ist, das deine default route ins lokale netzwerk zeigt. mach mal "route del default" bevor du asdl-start aufrufst.
Back to top
View user's profile Send private message
Udo
Tux's lil' helper
Tux's lil' helper


Joined: 31 Jul 2002
Posts: 105
Location: Dortmund

PostPosted: Tue Aug 06, 2002 8:34 am    Post subject: Hat geklappt Reply with quote

ja,danke,das war es.
War kurz davor alles mit adsl neu zu holen,aber jetzt geht es.
Grus udo
_________________
Aller Anfang ist schwer,aber nur für Anfänger.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum