View previous topic :: View next topic |
Author |
Message |
Deever Veteran
Joined: 06 Jul 2002 Posts: 1354 Location: Zürich / Switzerland
|
Posted: Sun Aug 04, 2002 11:08 am Post subject: gentoo und fernsehen... |
|
|
Hey Amigos, wie geht's?
Also um es gleich zu sagen, ich benutze den vanilla kernel, weil die gentoo kernels bei mir nie richtig gefunzt haben!
Jetzt will ich meine schon reichlich verstaubte tv-karte auch unter gentoo nutzen, habe mit daher auch diverse doquus gezogen, blick da aber doch net ganz durch! Die bttv treiber (die ich a.d. auch unter suse nutzte) sind nicht (mehr) standardmässig beim kernel dabei. Also muss ich mir die saugen. Das klappt auch, aber wenn ich den tarball nun auspacke, weiss ich nicht wohin mit den treiber(n)!?
Mit dem kompiliern solltes dann wieder keine schwierigkeiten geben, das hab ich schon einige hundert mal gemacht!
Gruss
dev |
|
Back to top |
|
|
mglauche Retired Dev
Joined: 25 Apr 2002 Posts: 564 Location: Germany
|
Posted: Sun Aug 04, 2002 2:55 pm Post subject: |
|
|
hmm .. bttv ist (immer) im standard-kernel. du musst aber erst das i2c interface unter character devices aktiviern damit du es sehen kannst *warte auf den neuen kbuild in kernel 2.5* |
|
Back to top |
|
|
Deever Veteran
Joined: 06 Jul 2002 Posts: 1354 Location: Zürich / Switzerland
|
Posted: Sun Aug 04, 2002 9:30 pm Post subject: |
|
|
Na was sagt man dazu! Überall hab ich gelesen, der treiber sei net dabei...aber egal!
Ich hab den kernel jetzt mit entsprechender unterstützung neu kompiliert, einmal als modul, und jetzt fest in den kernel. Das funzt aber so oder so nicht! zb 'emerge kwintv' bricht wie immer ab mit: Code: | ...
v4lxif.h:124: `V4L_DEVICE' was not declared in this scope
v4lxif.h:236: `V4L_DEVICE' was not declared in this scope
make[4]: *** [dsp.o] Error 1
make[4]: *** Waiting for unfinished jobs....
In file included from /usr/include/g++-v31/backward/iostream.h:31,
from channel.h:26,
from wintvscreen.h:39,
from rcfile.cpp:29:
/usr/include/g++-v31/backward/backward_warning.h:32:2: warning: #warning This file includes at least one deprecated or antiquated header. Please consider using one of the 32 headers found in section 17.4.1.2 of the C++ standard. Examples include substituting the <X> header for the <X.h> header for C++ includes, or <sstream> instead of the deprecated header <strstream.h>. To disable this warning use -Wno-deprecated.
In file included from videoclip.h:6,
from wintvscreen.h:40,
from rcfile.cpp:29:
v4lxif.h:124: `V4L_DEVICE' was not declared in this scope
v4lxif.h:236: `V4L_DEVICE' was not declared in this scope
In file included from rcfile.cpp:29:
wintvscreen.h:60: `V4L_DEVICE' was not declared in this scope
rcfile.cpp: In constructor `rcfile::rcfile()':
rcfile.cpp:70: `V4L_DEVICE' undeclared (first use this function)
rcfile.cpp:70: (Each undeclared identifier is reported only once for each function it appears in.)
make[4]: *** [rcfile.o] Error 1
make[4]: Leaving directory `/var/tmp/portage/kwintv-0.8.11/work/kwintv-0.8.11/kwintv/kwintv'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/kwintv-0.8.11/work/kwintv-0.8.11/kwintv/kwintv'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/kwintv-0.8.11/work/kwintv-0.8.11/kwintv'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/kwintv-0.8.11/work/kwintv-0.8.11'
make: *** [all-recursive-am] Error 2
!!! ERROR: The ebuild did not complete successfully.
!!! Function kde_src_compile, Line -4754, Exitcode 2
!!! died running emake, kde_src_compile:make
!!! emerge aborting on /usr/portage/media-video/kwintv/kwintv-0.8.11.ebuild . |
Und als ichs mir halt so gesaugt hab und händisch installieren wollte: Code: | ...
checking for Video4Linux device...
configure: error: Oops! No Video4Linux device (/dev/video) found! |
Dazu ist zu sagen, dass bei mir auch der sound net funzt, wäre also nicht das einzige, was nicht rennt!!
Quote: | *warte auf den neuen kbuild in kernel 2.5* |
Hmmm...warum benutzt du denn nen entwicklerkernel?!
dev |
|
Back to top |
|
|
mglauche Retired Dev
Joined: 25 Apr 2002 Posts: 564 Location: Germany
|
Posted: Mon Aug 05, 2002 5:39 pm Post subject: |
|
|
benutze ihn nicht habe aber ähnlich probleme mit einer sehr neuen video karte (saa71irgentwas)
tut es xawtv ? das ist so das simpelste programm für linux tv... (aber /dev/video sollte da sein!)
für bttv .. besser als modul, dann kann man einfacher parameter übergeben (machmal nötig !)
Der entwicker des bttv und saa-treibers findest du unter:
http://bytesex.org/bttv/
Quote: | bttv 0.7.x and kernel 2.4.x are in sync now (beside some experimental stuff which isn't in the standard kernel yet). |
|
|
Back to top |
|
|
Deever Veteran
Joined: 06 Jul 2002 Posts: 1354 Location: Zürich / Switzerland
|
Posted: Mon Aug 05, 2002 7:43 pm Post subject: |
|
|
Tia...xawtv liess sich zwar fehlerlos emergen, aber dafür beim aufruf:
Code: | deever@deever deever $ xawtv
This is xawtv-3.73, running on Linux/i686 (2.4.18.gentoo)
can't open /dev/v4l/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/v4l/video0: No such file or directory
v4l: open /dev/v4l/video0: No such file or directory
no video grabber device available |
???
Btw, kannst du mal deine kernel .config posten, irgendwie hab ich das gefühl, dass ich da wa net supportet hab, was ich sollte, hab aber kein plan was! Hier hab ich meine
Code: | ...
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
CONFIG_I2C_PARPORT=m
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set
... |
Die karte ist eine pctv pro von pinnacle systems...
Danke für deine hilfe!
dev
PS: Sorry!! Gerade noch eingefallen!
Code: | ...
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_ACPI is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=y
CONFIG_I2C_VELLEMAN=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ELEKTOR=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PROC=y
... |
|
|
Back to top |
|
|
mglauche Retired Dev
Joined: 25 Apr 2002 Posts: 564 Location: Germany
|
Posted: Sat Aug 10, 2002 9:57 am Post subject: |
|
|
ok, hab tv bei mir ans laufen gebracht (mit 2.4.19+v4l2 patch, und ein paar anpassungern
aber .. der bttv treiber sollte so direkt laufen.
Mach mal: modprobe bttv
und danach "dmesg", und schau dir mal die meldungen an, die bttv
von sich gibt.
Es kann nämlich sein, das deine karte nicht automatisch erkannt wird, dann sollten dort info's stehen.
Auch /usr/src/linux/Documentation/video4linux/bttv/* lesen insbesondere die Dateien Insmod-options und CARDLIST
hoffe das hilft erst mal |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|