View previous topic :: View next topic |
Author |
Message |
sapnesh n00b
Joined: 17 Feb 2015 Posts: 14 Location: India
|
Posted: Tue Mar 10, 2015 3:41 pm Post subject: [SOLVED] ifconfig wlo1 up/ SIOCSIFFLAGS: Input/output error |
|
|
I am unable to get my wireless interface up and running.
Code: | sudo ifconfig wlo1 up
SIOCSIFFLAGS: Input/output error |
some of the things that I did just before arriving at this error :-
1. I recompiled my kernel enabling Code: | CONFIG_TUN(for openvpn) | and I also disabled Code: | NSA SElinux support | in security options and I also disabled Code: | NFS(thought I wouldn't need it). |
2. I succesfully switched from dhcpcd to NetworkManager(and dhcpd) and installed kde frontend Network Management,
3. Initially wlo1 was softblocked ,which I unblocked and was able to get it up and use a wifi network successfully
But after the reboot the wlo1 was down and has been throwing that error ever since I tried to get it up again.
This is my wlo1
Code: | sudo ifconfig wlo1
wlo1: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 0c:84:dc:ab:39:e5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
This is the output of dmesg just after I run Code: | sudo ifconfig wlo1 up |
Code: | [ 1084.065355] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1085.166214] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1085.166219] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 1086.271067] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1087.371920] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1087.371925] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 1103.210668] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1104.311557] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1104.311563] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 1114.054135] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1115.155597] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 1115.155603] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 2281.149361] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 2282.250262] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 2282.250270] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 2345.242898] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 2346.343777] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 2346.343783] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) |
Please Help! _________________ I solemnly swear that I am upto no good.
Last edited by sapnesh on Fri Mar 13, 2015 5:16 am; edited 1 time in total |
|
Back to top |
|
|
sapnesh n00b
Joined: 17 Feb 2015 Posts: 14 Location: India
|
Posted: Wed Mar 11, 2015 3:23 pm Post subject: |
|
|
Well, I let my laptop take the yesterday night off and the issue seems to be solved this morning. When I booted it up I was able to connect to my wifi directly through KDE's Network management without doing anything else(ifconfig wlo1 up).
But I still don't know what caused the error and what solved it, as I had already tried shutting down my laptop and booting it up again.
Any insight would be really appreciated . Thanks
P.S: I'm going to wait for sometime before marking this thread SOLVED. _________________ I solemnly swear that I am upto no good. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|