Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[solved]iMon Remote has stopped working after system upgrade
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Multimedia
View previous topic :: View next topic  
Author Message
musv
Advocate
Advocate


Joined: 01 Dec 2002
Posts: 3333
Location: de

PostPosted: Wed Nov 26, 2014 11:38 pm    Post subject: [solved]iMon Remote has stopped working after system upgrade Reply with quote

Good evening,

recently I've updated my HTPC.

Kernel 3.13 -> 3.17

and my remote control has stopped working. The kernel config is exactly the same:

3.17.3:
dmes | grep imon :
[    1.894086] imon 3-2:1.0: imon_set_display_type: overriding display type to 2 via modparam
[    1.920063] Registered IR keymap rc-imon-pad
[    1.946271] imon 3-2:1.0: iMON device (15c2:0036, intf0) on usb<3:2> initialized
[    1.946338] imon 3-2:1.1: iMON device (15c2:0036, intf1) on usb<3:2> initialized
[    1.946410] usbcore: registered new interface driver imon
[    1.961042] imon 3-2:1.0: Looks like you're trying to use an IR protocol this device does not support
[    1.961051] imon 3-2:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol


cat /proc/bus/input/devices:
I: Bus=0003 Vendor=15c2 Product=0036 Version=0002
N: Name="iMON Panel, Knob and Mouse(15c2:0036)"
P: Phys=usb-0000:00:1d.1-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
U: Uniq=
H: Handlers=kbd mouse0 event2
B: PROP=0
B: EV=100007
B: KEY=10800100 200000000 30000 400010000 411000000801 e168000000000 10000002
B: REL=103

I: Bus=0003 Vendor=15c2 Product=0036 Version=0002
N: Name="iMON Remote (15c2:0036)"
P: Phys=usb-0000:00:1d.1-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/rc/rc0/input6
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 4400000108c0320 2d5008000000000 30000 400119000 418614000801 809e168000000000 200000010004002
B: MSC=10


ir-keytable:
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
   Driver imon, table rc-imon-pad
   Supported protocols: RC-6 other
   Enabled protocols: other
   Name: iMON Remote (15c2:0036)
   bus: 3, vendor/product: 15c2:0036, version: 0x0002
   Repeat delay = 500 ms, repeat period = 125 ms


No output with irw.

3.13.6
dmes | grep imon :
[    2.068094] imon 3-2:1.0: imon_set_display_type: overriding display type to 2 via modparam
[    2.094060] Registered IR keymap rc-imon-pad
[    2.120600] imon 3-2:1.0: iMON device (15c2:0036, intf0) on usb<3:2> initialized
[    2.120692] imon 3-2:1.1: iMON device (15c2:0036, intf1) on usb<3:2> initialized
[    2.123772] usbcore: registered new interface driver imon
[    2.145288] imon 3-2:1.0: Looks like you're trying to use an IR protocol this device does not support
[    2.145302] imon 3-2:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol



cat /proc/bus/input/devices:
I: Bus=0003 Vendor=15c2 Product=0036 Version=0002
N: Name="iMON Panel, Knob and Mouse(15c2:0036)"
P: Phys=usb-0000:00:1d.1-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
U: Uniq=
H: Handlers=kbd mouse0 event2
B: PROP=0
B: EV=100007
B: KEY=10800320 200000200000000 30000 400110000 411000000801 e168000000000 10000002
B: REL=103

I: Bus=0003 Vendor=15c2 Product=0036 Version=0002
N: Name="iMON Remote (15c2:0036)"
P: Phys=usb-0000:00:1d.1-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/rc/rc0/input6
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 4400000108c0320 2d5008000000000 30000 400119000 418614000801 809e168000000000 200000010004002
B: MSC=10


ir-keytable:
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
   Driver imon, table rc-imon-pad
   Supported protocols: RC-6 other
   Enabled protocols: other
   Name: iMON Remote (15c2:0036)
   bus: 3, vendor/product: 15c2:0036, version: 0x0002
   Repeat delay = 500 ms, repeat period = 125 ms


irw:
cf 0 KEY_PLAY irremote
cf 0 KEY_PLAY irremote
e 0 KEY_BACKSPACE irremote
e 0 KEY_BACKSPACE irremote
77 0 KEY_PAUSE irremote
cf 0 KEY_PLAY irremote
e 0 KEY_BACKSPACE irremote


Any ideas, how to get the remote working in 3.17.x?


Last edited by musv on Sun Nov 30, 2014 10:05 am; edited 1 time in total
Back to top
View user's profile Send private message
musv
Advocate
Advocate


Joined: 01 Dec 2002
Posts: 3333
Location: de

PostPosted: Sun Nov 30, 2014 10:05 am    Post subject: Reply with quote

Got the problem. Was a trial and error process, which took quite a big amount of time.

As my tv-card I'm using a Cine S2. There's a driver in the kernel, but that driver isn't working properly. The correct driver can be found in the VDR-Portal.

This driver package includes also the keymaps and the remote controller drivers. I didn't check the menu options and just compiled the whole package. So I had a couple of remote controller drivers twice in the /lib/modules folder. I guess, this messed up the whole thing and confused the kernel.

After deactivating the 2nd remote controller drivers, it worked as expected.

Unfortunately I didn't get any error messages by the kernel. :(
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Multimedia All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum