Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
svgalib ..
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish)
View previous topic :: View next topic  
Author Message
zytek
Apprentice
Apprentice


Joined: 06 Feb 2004
Posts: 233
Location: Poland, Ostrów Wlkp.

PostPosted: Sat Feb 21, 2004 8:50 am    Post subject: svgalib .. Reply with quote

No ekstra. Świerza instalacja gentoo, emerge system, emerge kde:

Code:

gcc -shared -Wl,-soname,libvga.so.1 \
-Xlinker --retain-symbols-file -Xlinker ../src/exports \
  -o libvga.so.1.9.17 vga.o vgaio.o vgadraw.o vgaclear.o vgaline.o vgapix.o vgapal.o vgacol.o vgamodesel.o vgamisc.o vgadump.o vgaconvplanar.o vgaaccel.o timing.o vgaregs.o interface.o accel.o vgapci.o vga_helper.o vga_console.o vgarelvgaio.o vgammvgaio.o vgacursor.o vganullio.o mouse/mouse.o joystick/joystick.o keyboard/keyboard.o ramdac/ramdac.o ramdac/normal.o ramdac/attdacs.o ramdac/sierra.o ramdac/icw.o ramdac/s3dacs.o ramdac/IBMRGB52x.o ramdac/ics_gendac.o clockchip/icd2061a.o vgadrv.o regextr.o modetab.o drivers/cirrus.o drivers/tvga8900.o drivers/trident.o drivers/s3.o drivers/ark.o drivers/ali.o drivers/chips.o drivers/apm.o drivers/vesa.o lrmi.o drivers/nv3.o drivers/savage.o drivers/g400.o drivers/pm2.o drivers/millennium.o drivers/r128.o drivers/mx.o drivers/paradise.o drivers/rage.o drivers/banshee.o drivers/sis.o drivers/i740.o drivers/i810.o drivers/laguna.o drivers/et6000.o drivers/neo.o drivers/fbdev.o drivers/rendition.o -lm
make: Leaving directory `/var/tmp/portage/svgalib-1.9.17-r3/work/svgalib-1.9.17/src'
make: Entering directory `/var/tmp/portage/svgalib-1.9.17-r3/work/svgalib-1.9.17/threeDKit'
rm -f lib3dkit.a
ar rcs lib3dkit.a
make: Leaving directory `/var/tmp/portage/svgalib-1.9.17-r3/work/svgalib-1.9.17/threeDKit'
make: Entering directory `/var/tmp/portage/svgalib-1.9.17-r3/work/svgalib-1.9.17/kernel/svgalib_helper'
Makefile:10: *** INCLUDEDIR is not set up correctly.  Stop.
make: Leaving directory `/var/tmp/portage/svgalib-1.9.17-r3/work/svgalib-1.9.17/kernel/svgalib_helper'

!!! ERROR: media-libs/svgalib-1.9.17-r3 failed.
!!! Function src_compile, Line 59, Exitcode 2
!!! Failed to build kernel module!


No i leżę. Any hints?
Back to top
View user's profile Send private message
zytek
Apprentice
Apprentice


Joined: 06 Feb 2004
Posts: 233
Location: Poland, Ostrów Wlkp.

PostPosted: Sat Feb 21, 2004 8:54 am    Post subject: Reply with quote

Eh, ten shit wymaga chyba zbudowanego kernela odpowiadającego uname -r, ja stawiam system z chroota więc się wysypało.
Back to top
View user's profile Send private message
RaStro
n00b
n00b


Joined: 15 Feb 2004
Posts: 6

PostPosted: Sat Feb 21, 2004 12:37 pm    Post subject: Re: svgalib .. Reply with quote

zytek wrote:


!!! ERROR: media-libs/svgalib-1.9.17-r3 failed.
!!! Function src_compile, Line 59, Exitcode 2
!!! Failed to build kernel module!
[/code]


No i leżę. Any hints?

sprubuj tak:
Code:

export USE="build"
emerge svgalib


U mnie pomogło.
pzdr.
Back to top
View user's profile Send private message
zytek
Apprentice
Apprentice


Joined: 06 Feb 2004
Posts: 233
Location: Poland, Ostrów Wlkp.

PostPosted: Sat Feb 21, 2004 1:37 pm    Post subject: Reply with quote

mhm. za późno. ;)
olałem to, USE="-svga" i jazda.

ale dzięki, zapamiętam na przyszłość.
Back to top
View user's profile Send private message
ezman
n00b
n00b


Joined: 22 Jan 2004
Posts: 9
Location: NorthWestern U.S.

PostPosted: Mon Feb 23, 2004 12:30 am    Post subject: Reply with quote

Quote:
sprubuj tak:

Code:



export USE="build"
emerge svgalib



U mnie pomogło.


Ten sam klopot i to mi dzialalo, bardzo dziekuje.
A co ten "build" robi? Czytalem ze nie musi sie to ustawiac bo jest uzyte w biegu "bootstrap"
_________________
Happy Gentoo Convert :)
Back to top
View user's profile Send private message
zytek
Apprentice
Apprentice


Joined: 06 Feb 2004
Posts: 233
Location: Poland, Ostrów Wlkp.

PostPosted: Mon Feb 23, 2004 12:53 am    Post subject: Reply with quote

Warto by było zgłosić tego buga, jeśli jeszcze nikt tego nie zrobił.
Back to top
View user's profile Send private message
meteo
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2003
Posts: 136
Location: Warsaw, Poland

PostPosted: Wed Feb 25, 2004 8:43 am    Post subject: Reply with quote

a u mnie też się wywalało (nie z chroota), więc najpierw olałem
Code:
USE="-svga" emerge mplayer
no i poszło (bez obslugi libsvga w mplayerze, ale co tam), później jednak, po dzisiejszym porannym
Code:
emerge sync
poszło bez gadania
_________________
.m
Back to top
View user's profile Send private message
btower
n00b
n00b


Joined: 31 Jul 2003
Posts: 70
Location: Poland

PostPosted: Wed Feb 25, 2004 12:29 pm    Post subject: Re: svgalib .. Reply with quote

RaStro wrote:
zytek wrote:


!!! ERROR: media-libs/svgalib-1.9.17-r3 failed.
!!! Function src_compile, Line 59, Exitcode 2
!!! Failed to build kernel module!
[/code]


No i leżę. Any hints?

sprubuj tak:
Code:

export USE="build"
emerge svgalib


U mnie pomogło.
pzdr.


Code:


grep build /usr/portage/profiles/use.desc
build - !!internal use only!! DO NOT SET THIS FLAG YOURSELF!, used for creating build images and the first half of bootstrapping.
...


no comment.

https://forums.gentoo.org/viewtopic.php?t=130166&highlight=error+medialibs+svgalib1+9+17r3+failed
Back to top
View user's profile Send private message
no4b
Bodhisattva
Bodhisattva


Joined: 18 Jan 2004
Posts: 774
Location: Tarnów, Poland

PostPosted: Wed Feb 25, 2004 5:26 pm    Post subject: Reply with quote

Code:
usr/src/linux/include/linux/pci.h:500: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:522: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:524: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:590: error: syntax error before "class"
/usr/src/linux/include/linux/pci.h:617: error: syntax error before "u8"
/usr/src/linux/include/linux/pci.h:618: error: syntax error before "u16"
/usr/src/linux/include/linux/pci.h:619: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:620: error: syntax error before "u8"
/usr/src/linux/include/linux/pci.h:621: error: syntax error before "u16"
/usr/src/linux/include/linux/pci.h:622: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:624: error: syntax error before "u8"
/usr/src/linux/include/linux/pci.h: In function `pci_read_config_byte':
/usr/src/linux/include/linux/pci.h:626: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:626: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:626: error: `where' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h:626: error: `val' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:628: error: syntax error before "u16"
/usr/src/linux/include/linux/pci.h: In function `pci_read_config_word':
/usr/src/linux/include/linux/pci.h:630: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:630: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:630: error: `where' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h:630: error: `val' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:632: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h: In function `pci_read_config_dword':
/usr/src/linux/include/linux/pci.h:634: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:634: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:634: error: `where' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h:634: error: `val' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:636: error: syntax error before "u8"
/usr/src/linux/include/linux/pci.h: In function `pci_write_config_byte':
/usr/src/linux/include/linux/pci.h:638: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:638: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:638: error: `where' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h:638: error: `val' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:640: error: syntax error before "u16"
/usr/src/linux/include/linux/pci.h: In function `pci_write_config_word':
/usr/src/linux/include/linux/pci.h:642: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:642: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:642: error: `where' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h:642: error: `val' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:644: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h: In function `pci_write_config_dword':
/usr/src/linux/include/linux/pci.h:646: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:646: error: invalid type argument of `->'
/usr/src/linux/include/linux/pci.h:646: error: `where' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h:646: error: `val' undeclared (first use in this function)
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:656: error: syntax error before "u64"
/usr/src/linux/include/linux/pci.h:657: error: syntax error before "u64"
/usr/src/linux/include/linux/pci.h:658: error: syntax error before "u64"
/usr/src/linux/include/linux/pci.h:662: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:663: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:665: error: syntax error before "u32"
/usr/src/linux/include/linux/pci.h:674: error: syntax error before '(' token
/usr/src/linux/include/linux/pci.h:674: error: syntax error before "u8"
/usr/src/linux/include/linux/pci.h:674: error: `pci_fixup_irqs' declared as function returning a function
In file included from /usr/src/linux/include/linux/pci.h:695,
                 from main.c:19:
/usr/src/linux/include/linux/dmapool.h:14:20: asm/io.h: Nie ma takiego pliku ani katalogu
/usr/src/linux/include/linux/dmapool.h:15:29: asm/scatterlist.h: Nie ma takiego pliku ani katalogu
In file included from /usr/src/linux/include/linux/pci.h:695,
                 from main.c:19:
/usr/src/linux/include/linux/dmapool.h:18: error: syntax error before "size_t"
/usr/src/linux/include/linux/dmapool.h:22: error: syntax error before "dma_addr_t"
/usr/src/linux/include/linux/dmapool.h:24: error: syntax error before "dma_addr_t"
In file included from main.c:19:
/usr/src/linux/include/linux/pci.h:724:21: asm/pci.h: Nie ma takiego pliku ani katalogu
In file included from main.c:19:
/usr/src/linux/include/linux/pci.h: In function `pci_get_drvdata':
/usr/src/linux/include/linux/pci.h:831: error: dereferencing pointer to incomplete type
/usr/src/linux/include/linux/pci.h: In function `pci_set_drvdata':
/usr/src/linux/include/linux/pci.h:836: error: dereferencing pointer to incomplete type
/usr/src/linux/include/linux/pci.h: In function `pci_name':
/usr/src/linux/include/linux/pci.h:844: error: dereferencing pointer to incomplete type
/usr/src/linux/include/linux/pci.h: At top level:
/usr/src/linux/include/linux/pci.h:863: error: syntax error before "u16"
/usr/src/linux/include/linux/pci.h:863: warning: no semicolon at end of struct or union
/usr/src/linux/include/linux/pci.h:865: error: syntax error before '}' token
In file included from main.c:20:
/usr/src/linux/include/linux/devfs_fs_kernel.h:9:27: asm/semaphore.h: Nie ma takiego pliku ani katalogu
In file included from main.c:20:
/usr/src/linux/include/linux/devfs_fs_kernel.h:14: error: syntax error before "dev"
/usr/src/linux/include/linux/devfs_fs_kernel.h:16: error: syntax error before "dev"
In file included from main.c:25:
kernel26compat.h:2:28: linux/version.h: Nie ma takiego pliku ani katalogu
kernel26compat.h:4:40: missing binary operator before token "("
main.c:27:25: asm/uaccess.h: Nie ma takiego pliku ani katalogu
main.c:28:47: asm/system.h: Nie ma takiego pliku ani katalogu
main.c:29:48: asm/segment.h: Nie ma takiego pliku ani katalogu
main.c:30:20: asm/io.h: Nie ma takiego pliku ani katalogu
main.c:31:25: asm/pgtable.h: Nie ma takiego pliku ani katalogu
main.c:32:21: asm/irq.h: Nie ma takiego pliku ani katalogu
main.c: In function `svgalib_helper_ioctl':
main.c:118: error: dereferencing pointer to incomplete type
main.c:122: error: `u8' undeclared (first use in this function)
main.c:122: error: syntax error before "pb"
main.c:123: error: `u16' undeclared (first use in this function)
main.c:124: error: `u32' undeclared (first use in this function)
main.c:129: error: `EINVAL' undeclared (first use in this function)
main.c:136: error: syntax error before "io_t"
main.c:139: error: `ENOMEM' undeclared (first use in this function)
main.c:143: error: `EPERM' undeclared (first use in this function)
main.c:147: error: syntax error before "io_t"
main.c:154: error: syntax error before "io_t"
main.c:161: error: syntax error before "io_t"
main.c:168: error: syntax error before "io_t"
main.c:176: error: syntax error before "io_t"
main.c:184: error: syntax error before "io_t"
main.c:192: error: syntax error before "io_t"
main.c:197: error: syntax error before "io_t"
main.c:202: error: syntax error before "io_t"
main.c:207: error: syntax error before "io_t"
main.c:213: error: syntax error before "io_t"
main.c:219: error: syntax error before "io_t"
main.c:225: error: syntax error before "pcic_t"
main.c:229: error: `pb' undeclared (first use in this function)
main.c:234: error: syntax error before "pcic_t"
main.c:238: error: `pw' undeclared (first use in this function)
main.c:243: error: syntax error before "pcic_t"
main.c:247: error: `pl' undeclared (first use in this function)
main.c:252: error: syntax error before "pcic_t"
main.c:260: error: syntax error before "pcic_t"
main.c:268: error: syntax error before "pcic_t"
main.c:276: error: syntax error before "pcic_t"
main.c:296: error: case label does not reduce to an integer constant
main.c:302: error: dereferencing pointer to incomplete type
main.c:310: error: `SA_SHIRQ' undeclared (first use in this function)
main.c:138: warning: unreachable code at beginning of switch statement
main.c: In function `svgalib_helper_open':
main.c:361: error: dereferencing pointer to incomplete type
main.c:363: error: `ENODEV' undeclared (first use in this function)
main.c: In function `remap_cache':
main.c:386: error: dereferencing pointer to incomplete type
main.c:386: error: `PAGE_SHIFT' undeclared (first use in this function)
main.c:388: error: dereferencing pointer to incomplete type
main.c:388: error: `VM_IO' undeclared (first use in this function)
main.c:412: error: `boot_cpu_data' undeclared (first use in this function)
main.c:413: error: dereferencing pointer to incomplete type
main.c:413: error: `_PAGE_PCD' undeclared (first use in this function)
main.c:427: error: dereferencing pointer to incomplete type
main.c:427: error: dereferencing pointer to incomplete type
main.c:427: error: dereferencing pointer to incomplete type
main.c:427: error: dereferencing pointer to incomplete type
main.c:429: error: `EAGAIN' undeclared (first use in this function)
main.c: In function `svgalib_helper_mmap':
main.c:475: error: dereferencing pointer to incomplete type
main.c:476: error: dereferencing pointer to incomplete type
main.c:477: error: dereferencing pointer to incomplete type
main.c:478:41: missing binary operator before token "("
main.c:481: error: dereferencing pointer to incomplete type
main.c:484: error: `EPERM' undeclared (first use in this function)
main.c:485: error: `EAGAIN' undeclared (first use in this function)
main.c: At top level:
main.c:489: error: variable `svgalib_helper_fops' has initializer but incomplete type
main.c:490:41: missing binary operator before token "("
main.c:493: error: unknown field `ioctl' specified in initializer
main.c:493: warning: excess elements in struct initializer
main.c:493: warning: (near initialization for `svgalib_helper_fops')
main.c:494: error: unknown field `mmap' specified in initializer
main.c:494: warning: excess elements in struct initializer
main.c:494: warning: (near initialization for `svgalib_helper_fops')
main.c:495: error: unknown field `open' specified in initializer
main.c:495: warning: excess elements in struct initializer
main.c:495: warning: (near initialization for `svgalib_helper_fops')
main.c:496: error: unknown field `release' specified in initializer
main.c:496: warning: excess elements in struct initializer
main.c:496: warning: (near initialization for `svgalib_helper_fops')
main.c:499:41: missing binary operator before token "("
main.c: In function `init_module':
main.c:603: error: dereferencing pointer to incomplete type
main.c: At top level:
/usr/src/linux/include/linux/elf.h:425: warning: array `_DYNAMIC' assumed to have one element
/usr/src/linux/include/linux/sched.h:194: error: storage size of `mmap_sem' isn't known
/usr/src/linux/include/linux/sched.h:227: error: storage size of `default_kioctx' isn't known
/usr/src/linux/include/linux/sched.h:234: error: storage size of `action' isn't known
/usr/src/linux/include/linux/sched.h:252: error: storage size of `shared_pending' isn't known
/usr/src/linux/include/linux/sched.h:408: error: storage size of `groups' isn't known
/usr/src/linux/include/linux/sched.h:413: error: storage size of `rlim' isn't known
/usr/src/linux/include/linux/sched.h:422: error: storage size of `thread' isn't known
/usr/src/linux/include/linux/sched.h:434: error: storage size of `pending' isn't known
/usr/src/linux/include/linux/stat.h:68: error: storage size of `atime' isn't known
/usr/src/linux/include/linux/stat.h:69: error: storage size of `mtime' isn't known
/usr/src/linux/include/linux/stat.h:70: error: storage size of `ctime' isn't known
/usr/src/linux/include/linux/module.h:462: error: storage size of `__this_module' isn't known
/usr/src/linux/include/linux/fs.h:262: error: storage size of `ia_atime' isn't known
/usr/src/linux/include/linux/fs.h:263: error: storage size of `ia_mtime' isn't known
/usr/src/linux/include/linux/fs.h:264: error: storage size of `ia_ctime' isn't known
/usr/src/linux/include/linux/quota.h:226: error: storage size of `dq_dqb' isn't known
/usr/src/linux/include/linux/fs.h:345: error: storage size of `bd_sem' isn't known
/usr/src/linux/include/linux/fs.h:388: error: storage size of `i_atime' isn't known
/usr/src/linux/include/linux/fs.h:389: error: storage size of `i_mtime' isn't known
/usr/src/linux/include/linux/fs.h:390: error: storage size of `i_ctime' isn't known
/usr/src/linux/include/linux/fs.h:397: error: storage size of `i_sem' isn't known
/usr/src/linux/include/linux/fs.h:403: error: storage size of `i_data' isn't known
/usr/src/linux/include/linux/fs.h:524: error: storage size of `f_owner' isn't known
/usr/src/linux/include/linux/fs.h:695: error: storage size of `s_umount' isn't known
/usr/src/linux/include/linux/fs.h:696: error: storage size of `s_lock' isn't known
/usr/src/linux/include/linux/fs.h:714: error: storage size of `kobj' isn't known
/usr/src/linux/include/linux/fs.h:721: error: storage size of `s_vfs_rename_sem' isn't known
/usr/src/linux/include/linux/pci.h:406: error: storage size of `dev' isn't known
main.c:489: error: storage size of `svgalib_helper_fops' isn't known
make: *** [main.o] Błąd 1

!!! ERROR: media-libs/svgalib-1.9.18-r1 failed.
!!! Function src_compile, Line 80, Exitcode 2
!!! Failed to build kernel module!



Jajeczko 2.6.3 ;/
Back to top
View user's profile Send private message
meteo
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2003
Posts: 136
Location: Warsaw, Poland

PostPosted: Thu Feb 26, 2004 5:31 am    Post subject: Reply with quote

a u mnie z tym samym jądrem (no, może "trochę innym": gentoo-dev-sources-2.6.3-r1) poszło (po wczorajszym emerge syncu)...
może jakieś CFLAGI?
_________________
.m
Back to top
View user's profile Send private message
fallow
Bodhisattva
Bodhisattva


Joined: 08 Jan 2004
Posts: 2208
Location: Poland

PostPosted: Thu Feb 26, 2004 6:56 am    Post subject: Reply with quote

ja mialem mase problem m.in z naglowkami na gentoo-dev-2.6.3-r2 , na 2.6.3-r1 wlasnie , wszystko bez najmniejszych (jak do tej pory) problemow ;)
u mnie na r1 , takze poszlo :)
Back to top
View user's profile Send private message
meteo
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2003
Posts: 136
Location: Warsaw, Poland

PostPosted: Thu Feb 26, 2004 7:07 am    Post subject: Reply with quote

gdzies tu na forum (ale chyba angielskim, nie pamiętam) znalazłem informację, że czasem dla sources 2.6.x trzeba ręcznie "spatchować" dwa pliki *.h w /usr/src/linux, były nawet linki do tych, które trzeba podstawić. działało dobrze z 2.6.3, teraz mam "gołe" 2.6.3-r1 i jest OK
_________________
.m
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum