| View previous topic :: View next topic |
| Author |
Message |
moogli
n00b
Joined: 25 Jul 2002
Posts: 30
|
 Posted: Wed Sep 18, 2002 5:05 pm Post subject: ddclient + tdsl |
 |
|
Hallo Leute,
habe hier
Probleme mit der ddclient.conf.
DynDNS bei dyndns.org, Internetadresse moogli.homelinux.org
Wie muss denn die ddclient.conf aussehen? Folgende funktioniert nicht:
| Quote: | daemon=300 # check every 300 seconds
syslog=yes # log update msgs to syslog
mail=root # mail update msgs to root
pid=/var/run/ddclient.pid # record PID in file.
#
#use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW
#use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW
#use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW
#use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW
#use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW
#use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW
#use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro
#use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router
#fw-login=admin, fw-password=XXXXXX # FW login and password
#
## To obtain an IP address from FW status page (using fw-login, fw-password)
#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
#
## To obtain an IP address from Web status page (using the proxy if defined)
#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
#
#use=ip, ip=127.0.0.1 # via static IP's
use=if, if=ppp0 # via interfaces
#use=web # via web
#
protocol=dyndns2 # default protocol
#proxy=fasthttp.sympatico.ca:80 # default proxy
server=members.dyndns.org # default server
#server=members.dyndns.org:8245 # default server (bypassing proxies)
login=loginname # default login
password=passwort # default password
#mx=mx.for.your.host # default MX
#backupmx=yes|no # host is primary MX?
#wildcard=yes|no # add wildcard CNAME?
##
## dyndns.org dynamic addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# server=members.dyndns.org, \
# protocol=dyndns2 \
# your-dynamic-host.dyndns.org
##
## dyndns.org static addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# static=yes \
# server=members.dyndns.org, \
# protocol=dyndns2 \
# your-static-host.dyndns.org
##
##
## dyndns.org custom addresses
##
## (supports variables: wildcard,mx,backupmx)
##
custom=yes \
server=members.dyndns.org, \
protocol=dyndns2 \
moogli.homelinux.org
|
Gruss
moogli |
|
| Back to top |
|
 |
giant
Tux's lil' helper
Joined: 01 Aug 2002
Posts: 107
|
| Posted: Thu Sep 19, 2002 7:18 am Post subject: |
|
|
Die Interessanten Einträge sind hier :
| Quote: |
use=if, if=ppp0 # via interfaces
#use=web # via web
#
protocol=dyndns2 # default protocol
#proxy=fasthttp.sympatico.ca:80 # default proxy
server=members.dyndns.org # default server
#server=members.dyndns.org:8245 # default server (bypassing proxies)
login=loginname # default login
password=passwort # default password
|
Bei Interface ist die Frage, ob Dein interface überhaupt ppp0 ist worüber Du Dich connectest.
Vielleicht einfach mal bei bestehender Verbindung ein ifconfig -a eingeben um festzustellen ob es auch wirklich ppp0 ist.
Ansonsten mal eine andere Lösung versuchen. z.B. web.
Ich benutz den Client mit meinem SMC Router und damit funktioniert das wunderbar.
Naja und bei den letzten beide Zeilen mußt Du natürlich auch Deine account daten eingeben. Evtl. mal die Logfiles mitlaufen lassen, messages z.B. um festzustellen woran es hapert. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
