View previous topic :: View next topic |
Author |
Message |
mariourk l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
![](images/avatars/17564073564d54f55cd1671.gif)
Joined: 11 Jul 2003 Posts: 807 Location: Urk, Netherlands
|
Posted: Wed Feb 11, 2004 8:30 pm Post subject: Will someone, with a ADM64 CPU compile a driver for me?? |
|
|
Hi,
Iam trying to to install Gentoo on my new ADM64 pc.
The problem is that I can't get my networkcard running.
To get it running I need a driver. I already found this one but
when I comile it on my laptop and copy it to a floppy, I can load it during the Gentoo
installation because the architecture is not good.
Will someone download the driver, compile it for me and post the bcm5700.o file
somewhere?
The driver can be downloaded here (about 700kb)
http://www.broadcom.com/drivers/driver-sla.php?driver=570x-Linux
Thanks a lot ![Very Happy :D](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Config Retired Dev
![Retired Dev Retired Dev](/images/ranks/rank-retired.gif)
![](images/avatars/10050817523f0b603b09eb4.gif)
Joined: 25 May 2003 Posts: 187 Location: Zurich, Switzerland
|
Posted: Wed Feb 11, 2004 10:36 pm Post subject: |
|
|
I'm quite tempted to say this but it seems this driver hasn't been ported yet to the 2.6 kernel series. I googled around but I found no patch.
If you can find one, I'll happily compile it for you.
Good luck
UPDATE: Sorry - the tarball provides a patch - but it's quite nasti to get it do the patching... I'll repost later... _________________ Config - caught by a chronic disease called tuxmania.... |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
scoobydu Veteran
![Veteran Veteran](/images/ranks/rank_rect_5_vet.gif)
![](images/avatars/1285448694430f87406e015.png)
Joined: 16 Feb 2003 Posts: 1076 Location: 'Mind the Gap'
|
Posted: Thu Feb 12, 2004 12:05 am Post subject: Re: Will someone, with a ADM64 CPU compile a driver for me?? |
|
|
mariourk wrote: | Hi,
Iam trying to to install Gentoo on my new ADM64 pc.
The problem is that I can't get my networkcard running.
To get it running I need a driver. I already found this one but
when I comile it on my laptop and copy it to a floppy, I can load it during the Gentoo
installation because the architecture is not good.
Will someone download the driver, compile it for me and post the bcm5700.o file
somewhere?
The driver can be downloaded here (about 700kb)
http://www.broadcom.com/drivers/driver-sla.php?driver=570x-Linux
Thanks a lot ![Very Happy :D](images/smiles/icon_biggrin.gif) |
The bcm5700 is supported out of the box with the amd64 livecd's.
Really confused what you are trying to do here .... laptops etc ..
In your kernel look under the Ethernet (1000 Mbit) section and you should have the Tigon3 and bcm5700 driver options.
scooby
ps from the technotes:
The bcm/tigon3 network driver;
Many Opteron motherboards come with a built-in on-board network chip manufactured by Broadcom. We have provided both the standard in-kernel tg3 driver as well as the bcm5700 driver to support this card. The tg3 driver should be used if possible, as it is community-supported, and the bcm5700 driver only exists to aide those who have trouble with tg3. _________________ Tyan Tiger K8W, 2xOpteron 240,Powerbook5,6 15" 1.5g, Macbook Black 2g, Mac Mini 1g, Ipod P60g.
| Linux - From a windows user perspective| |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
mariourk l33t
![l33t l33t](/images/ranks/rank_rect_4.gif)
![](images/avatars/17564073564d54f55cd1671.gif)
Joined: 11 Jul 2003 Posts: 807 Location: Urk, Netherlands
|
Posted: Thu Feb 12, 2004 12:51 pm Post subject: |
|
|
I tried to modprobe the tg3.o module but, if I do so, I get insmod errors. (No such device)
The bcm5700 module cn't be found:
Code: |
modprobe: Can't locate module bcm5700
|
The onboard chip I have is the "Broadcom NetXtreme BCM5788" |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
scoobydu Veteran
![Veteran Veteran](/images/ranks/rank_rect_5_vet.gif)
![](images/avatars/1285448694430f87406e015.png)
Joined: 16 Feb 2003 Posts: 1076 Location: 'Mind the Gap'
|
Posted: Fri Feb 13, 2004 11:19 am Post subject: |
|
|
mariourk wrote: | I tried to modprobe the tg3.o module but, if I do so, I get insmod errors. (No such device)
The bcm5700 module cn't be found:
Code: |
modprobe: Can't locate module bcm5700
|
The onboard chip I have is the "Broadcom NetXtreme BCM5788" |
Try the bcm5700 built into the kernel, and then dmesg to see what boot errors you get.
I'm not at a linux machine so can't check, but if you check the bcm5700 source (within your current kernel tree) you can see if your card is defined. If not then the download from broadcom has the 2.6 kernel patch in for the bcm5700 driver (so you could update what is in your current kernel)
I'd be surprised if the latest version hadn't already been merged into the 2.6.3 release candidates that are current at the moment. _________________ Tyan Tiger K8W, 2xOpteron 240,Powerbook5,6 15" 1.5g, Macbook Black 2g, Mac Mini 1g, Ipod P60g.
| Linux - From a windows user perspective| |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|