View previous topic :: View next topic |
Author |
Message |
lawl n00b
Joined: 18 Jul 2014 Posts: 20
|
Posted: Sat Oct 18, 2014 9:10 am Post subject: rts5229 doesn't see partition table on SD card |
|
|
Hello, I have Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader and want to make it work
Code: | 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Lenovo Device 5000
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at f2e00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel driver in use: rtsx_pci
|
when I plug in SD-card I can see this in udevadm monitor
Code: | $ udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[520.770323] add /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/rtsx_pci_sdmmc.0/mmc_host/mmc0/mmc0:b368 (mmc)
KERNEL[520.770361] add /devices/virtual/bdi/179:0 (bdi)
UDEV [520.770758] add /devices/virtual/bdi/179:0 (bdi)
UDEV [520.770825] add /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/rtsx_pci_sdmmc.0/mmc_host/mmc0/mmc0:b368 (mmc)
KERNEL[520.771995] add /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/rtsx_pci_sdmmc.0/mmc_host/mmc0/mmc0:b368/block/mmcblk0 (block)
UDEV [520.797213] add /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/rtsx_pci_sdmmc.0/mmc_host/mmc0/mmc0:b368/block/mmcblk0 (block)
|
and fdisk
Code: | $ sudo fdisk -l
...
Disk /dev/mmcblk0: 7,5 GiB, 8010072064 bytes, 15644672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes |
but I know, there is 2 partition on this device, so I can't mount them |
|
Back to top |
|
|
lawl n00b
Joined: 18 Jul 2014 Posts: 20
|
Posted: Sat Oct 18, 2014 9:13 am Post subject: |
|
|
yesterday I broke my raspberry boot partition and really don't wont use my phone as card-reader to fix it again =_= |
|
Back to top |
|
|
creaker l33t
Joined: 14 Jul 2012 Posts: 651
|
Posted: Sat Oct 18, 2014 11:02 am Post subject: |
|
|
My phone's microSD card shows something similar to your fdisk output - just generic device info, no any partitions info.
I have one partition and to get it mounted I run mount on entire device (not a partition). Like "mount /dev/sdb -t vfat /media".
It works for me. Though I can't suppose how to access the second partition. |
|
Back to top |
|
|
lawl n00b
Joined: 18 Jul 2014 Posts: 20
|
Posted: Sat Oct 18, 2014 11:28 am Post subject: |
|
|
I tried to mount disk before
Code: | $ sudo mount -t vfat /dev/mmcblk0 /mnt/sea
mount: /dev/mmcblk0 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
|
and without -t vfat
Code: | $ sudo mount /dev/mmcblk0 /mnt/sea
mount: /dev/mmcblk0 is write-protected, mounting read-only
Can only open '/dev/mmcblk0' as read-only
NTFS signature is missing.
Failed to mount '/dev/mmcblk0': Недопустимый аргумент
The device '/dev/mmcblk0' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? |
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|