| View previous topic :: View next topic |
| Author |
Message |
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
 Posted: Tue Aug 12, 2014 12:59 pm Post subject: [SOLVED] Failed to emerge media-gfx/splashutils-1.5.4.4-r1 |
 |
|
| Code: | # emerge splashutils
Calculating dependencies... done!
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) media-gfx/splashutils-1.5.4.4-r1
* splashutils-lite-1.5.4.4.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* splashutils-gentoo-1.0.17.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* miscsplashutils-0.1.8.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* libpng-1.4.3.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* jpegsrc.v8a.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* freetype-2.3.12.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* zlib-1.2.3.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking splashutils-lite-1.5.4.4.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking splashutils-gentoo-1.0.17.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking miscsplashutils-0.1.8.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking libpng-1.4.3.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking jpegsrc.v8a.tar.gz to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking freetype-2.3.12.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking zlib-1.2.3.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Source unpacked in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Preparing source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4 ...
* Applying splashutils-1.5.4.4-gentoo-typo-fix.patch ... [ ok ]
* Applying splashutils-1.5.4.4-freetype-bz2.patch ... [ ok ]
* Applying splashutils-1.5.4.4-bzip2.patch ... [ ok ]
* Running eautoreconf in '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4' ...
* Running libtoolize --install --copy --force --automake ... [ ok ]
* Running aclocal -I m4 ... [ ok ]
* Running autoconf ... [ ok ]
* Running autoheader ... [ ok ]
* Running automake --add-missing --copy --force-missing ... [ ok ]
* Running elibtoolize in: splashutils-1.5.4.4/
* Applying portage/1.2.0 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.4.2 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/freetype-2.3.12/
* Running elibtoolize in: splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/jpeg-8a/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/libpng-1.4.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/zlib-1.2.3/
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4 ...
make -j6 CC=x86_64-pc-linux-gnu-gcc LIB=lib64 STRIP=true
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -Wl,-O1 -Wl,--as-needed fbres.c -o fbres
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -Wl,-O1 -Wl,--as-needed usleep.c -o usleep
true usleep
true fbres
make[1]: Wejście do katalogu `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/miscsplashutils-0.1.8/fbtruetype'
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -I/usr/include/freetype2 -c -o fbtruetype.o fbtruetype.c
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -I/usr/include/freetype2 -c -o messages.o messages.c
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -I/usr/include/freetype2 -c -o console.o console.c
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -I/usr/include/freetype2 -c -o ttf.o ttf.c
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -I/usr/include/freetype2 -c -o luxisri.o luxisri.c
ttf.c:16:30: fatal error: freetype/ftoutln.h: Nie ma takiego pliku ani katalogu
compilation terminated.
make[1]: *** [ttf.o] Błąd 1
make[1]: *** Oczekiwanie na niezakończone zadania....
make[1]: Opuszczenie katalogu `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/miscsplashutils-0.1.8/fbtruetype'
make: *** [all] Błąd 2
emake failed
* ERROR: media-gfx/splashutils-1.5.4.4-r1::gentoo failed (configure phase):
* failed to build miscsplashutils
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 2829: Called die
* The specific snippet of code:
* emake CC="${CC}" LIB=$(get_libdir) STRIP=true || die "failed to build miscsplashutils";
*
* If you need support, post the output of `emerge --info '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/environment'.
* Working directory: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/miscsplashutils-0.1.8'
* S: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4'
>>> Failed to emerge media-gfx/splashutils-1.5.4.4-r1, Log file:
>>> '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/build.log'
* Messages for package media-gfx/splashutils-1.5.4.4-r1:
* ERROR: media-gfx/splashutils-1.5.4.4-r1::gentoo failed (configure phase):
* failed to build miscsplashutils
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 2829: Called die
* The specific snippet of code:
* emake CC="${CC}" LIB=$(get_libdir) STRIP=true || die "failed to build miscsplashutils";
*
* If you need support, post the output of `emerge --info '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/environment'.
* Working directory: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/miscsplashutils-0.1.8'
* S: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4'
# |
_________________
cogito ergo sum
Last edited by Oniryczny on Fri Aug 29, 2014 7:00 pm; edited 1 time in total |
|
| Back to top |
|
 |
krinn
Watchman
Joined: 02 May 2003
Posts: 7470
|
| Posted: Tue Aug 12, 2014 2:06 pm Post subject: |
|
|
Try | Code: | | LANG=C emerge splashutils |
It won't fix your issue, but we will be able to understand what "Nie ma takiego pliku ani katalogu" mean  |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Tue Aug 12, 2014 3:26 pm Post subject: |
|
|
sorry, it means: No such file or directory
_________________
cogito ergo sum |
|
| Back to top |
|
|
Logicien
Veteran
Joined: 16 Sep 2005
Posts: 1555
Location: Montréal
|
| Posted: Tue Aug 12, 2014 4:05 pm Post subject: |
|
|
You must disable the truetype USE flag for splashutils in /etc/portage/package.use:
| Code: | | media-gfx/splashutils -truetype |
_________________
Paul |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Tue Aug 12, 2014 4:40 pm Post subject: |
|
|
it didn't help | Code: |
# LANG=C emerge -av splashutils
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] media-gfx/splashutils-1.5.4.4-r1 USE="fbcondecor mng png -gpm -hardened -truetype" 0 kB
Total: 1 package (1 new), Size of downloads: 0 kB
Would you like to merge these packages? [Yes/No]
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) media-gfx/splashutils-1.5.4.4-r1
* splashutils-lite-1.5.4.4.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* splashutils-gentoo-1.0.17.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* miscsplashutils-0.1.8.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* libpng-1.4.3.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* jpegsrc.v8a.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* freetype-2.3.12.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* zlib-1.2.3.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking splashutils-lite-1.5.4.4.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking splashutils-gentoo-1.0.17.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking miscsplashutils-0.1.8.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking libpng-1.4.3.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking jpegsrc.v8a.tar.gz to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking freetype-2.3.12.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Unpacking zlib-1.2.3.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Source unpacked in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work
>>> Preparing source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4 ...
* Applying splashutils-1.5.4.4-gentoo-typo-fix.patch ... [ ok ]
* Applying splashutils-1.5.4.4-bzip2.patch ... [ ok ]
* Running eautoreconf in '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4' ...
* Running libtoolize --install --copy --force --automake ... [ ok ]
* Running aclocal -I m4 ... [ ok ]
* Running autoconf ... [ ok ]
* Running autoheader ... [ ok ]
* Running automake --add-missing --copy --force-missing ... [ ok ]
* Running elibtoolize in: splashutils-1.5.4.4/
* Applying portage/1.2.0 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.4.2 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/freetype-2.3.12/
* Running elibtoolize in: splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/jpeg-8a/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/libpng-1.4.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/zlib-1.2.3/
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4 ...
make -j6 CC=x86_64-pc-linux-gnu-gcc LIB=lib64 STRIP=true
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -Wl,-O1 -Wl,--as-needed fbres.c -o fbres
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -Wl,-O1 -Wl,--as-needed usleep.c -o usleep
true usleep
true fbres
make[1]: Wejście do katalogu `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/miscsplashutils-0.1.8/kbd'
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -c -o fgconsole.o fgconsole.c
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -c -o getfd.o getfd.c
x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -Wl,-O1 -Wl,--as-needed fgconsole.o getfd.o -o fgconsole
make[1]: Opuszczenie katalogu `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/miscsplashutils-0.1.8/kbd'
* econf: updating splashutils-1.5.4.4/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/jpeg-8a/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/jpeg-8a/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating splashutils-1.5.4.4/libs/libpng-1.4.3/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/libpng-1.4.3/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating splashutils-1.5.4.4/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --with-png --with-mng --without-gpm --without-ttf --without-ttf-kernel --enable-fbcondecor --docdir=/usr/share/doc/splashutils-1.5.4.4-r1 --with-freetype2-src=libs/freetype-2.3.12 --with-jpeg-src=libs/jpeg-8a --with-lpng-src=libs/libpng-1.4.3 --with-zlib-src=libs/zlib-1.2.3 --with-essential-libdir=/lib64
configure: loading site script /usr/share/config.site
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of x86_64-pc-linux-gnu-gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... ok
checking for sysroot... no
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... (cached) /bin/sed
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for klcc... klcc
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking for ceilf in -lm... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for clock_gettime in -lrt... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_create in -lpthread... yes
checking for pthread.h... (cached) yes
checking for xxpthread_create in -lpthread... no
checking for pthread_create in -lpthread... (cached) yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for jpeg_set_defaults in -ljpeg... yes
checking libmng.h usability... yes
checking libmng.h presence... yes
checking for libmng.h... yes
checking for mng_initialize in -lmng... yes
checking for zlibVersion in -lz... yes
checking for cmsCloseProfile in -llcms... yes
checking for libpng-config... /usr/bin/libpng-config
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating libs/Makefile
config.status: creating misc/Makefile
config.status: creating src/test/Makefile
config.status: creating docs/Makefile
config.status: creating scripts/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
>>> Source configured.
>>> Compiling source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4 ...
make -j6 CC=x86_64-pc-linux-gnu-gcc STRIP=true
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4/missing autoheader)
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make --silent all-recursive
Making all in libs
CONF libz.a
CONF libjpeg.a
MAKE zlib.a
CONF libpng.a
MAKE libpng.a
MAKE libjpeg.a
/usr/bin/ld: warning: cannot find entry symbol main; defaulting to 0000000000400200
Making all in src
CREATE fbsplash.h
Making all in .
libfbsplash.c: In function ‘fbsplash_send’:
libfbsplash.c:696:2: warning: format not a string literal and no format arguments [-Wformat-security]
libfbsplash.c: In function ‘fbsplash_profile’:
libfbsplash.c:650:8: warning: ignoring return value of ‘fscanf’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function ‘fbsplash_set_evdev’:
libfbsplash.c:615:9: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function ‘fbsplash_check_sanity’:
libfbsplash.c:571:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function ‘fbsplash_cache_cleanup’:
libfbsplash.c:498:8: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function ‘fbsplash_parse_kcmdline’:
libfbsplash.c:177:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
common.c: In function ‘dev_create’:
common.c:47:6: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function ‘vt_cursor_enable’:
libfbsplashrender.c:598:7: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function ‘fbsplashr_tty_silent_init’:
libfbsplashrender.c:627:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function ‘vt_cursor_disable’:
libfbsplashrender.c:593:7: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function ‘fbsplashr_input_init’:
libfbsplashrender.c:216:11: warning: ignoring return value of ‘fscanf’, declared with attribute warn_unused_result [-Wunused-result]
image.c: In function ‘is_png’:
image.c:171:7: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
daemon.c: In function ‘daemon_start’:
daemon.c:652:7: warning: ignoring return value of ‘chdir’, declared with attribute warn_unused_result [-Wunused-result]
daemon.c: In function ‘thf_switch_ttymon’:
daemon.c:476:7: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
CC fbcondecor_helper-kernel.o
CC fbcondecor_helper-libfbsplash.o
CC fbcondecor_helper-libfbsplashrender.o
CC fbcondecor_helper-fbcon_decor.o
CC fbcondecor_helper-common.o
CC fbcondecor_helper-parse.o
CC fbcondecor_helper-list.o
CC fbcondecor_helper-render.o
CC fbcondecor_helper-image.o
CC fbcondecor_helper-effects.o
CREATE libfbsplash.pc
daemon.c: In function ‘daemon_start’:
daemon.c:652:7: warning: ignoring return value of ‘chdir’, declared with attribute warn_unused_result [-Wunused-result]
daemon.c: In function ‘thf_switch_ttymon’:
daemon.c:476:7: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
CREATE libfbsplashrender.pc
LD fbcondecor_helper
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../lib64/libmng.a(libmng_cms.o): In function `mnglcms_createsrgbprofile':
(.text+0x1c3): undefined reference to `cmsFreeToneCurve'
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../lib64/libmng.a(libmng_cms.o): In function `mng_init_full_cms':
(.text+0x7d9): undefined reference to `cmsFreeToneCurve'
collect2: error: ld returned 1 exit status
make[4]: *** [fbsplashctl] Błąd 1
make[3]: *** [all-recursive] Błąd 1
make[2]: *** [all] Błąd 2
make[1]: *** [all-recursive] Błąd 1
make: *** [all] Błąd 2
emake failed
* ERROR: media-gfx/splashutils-1.5.4.4-r1::gentoo failed (compile phase):
* failed to build splashutils
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 2823: Called die
* The specific snippet of code:
* emake CC="${CC}" STRIP="true" || die "failed to build splashutils";
*
* If you need support, post the output of `emerge --info '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/environment'.
* Working directory: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4'
* S: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4'
>>> Failed to emerge media-gfx/splashutils-1.5.4.4-r1, Log file:
>>> '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/build.log'
* Messages for package media-gfx/splashutils-1.5.4.4-r1:
* ERROR: media-gfx/splashutils-1.5.4.4-r1::gentoo failed (compile phase):
* failed to build splashutils
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 2823: Called die
* The specific snippet of code:
* emake CC="${CC}" STRIP="true" || die "failed to build splashutils";
*
* If you need support, post the output of `emerge --info '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/splashutils-1.5.4.4-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/temp/environment'.
* Working directory: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4'
* S: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r1/work/splashutils-1.5.4.4'
# |
_________________
cogito ergo sum |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Tue Aug 12, 2014 5:15 pm Post subject: |
|
|
Oniryczny,
It actually helped quite a lot. This time it compiled. Now the linker cannot find the symbol cmsFreeToneCurve to link the package.
This normally indicates a missing dependency.
Unfortunately, I don't know what provides the cmsFreeToneCurve symbol.
-- edit--
Maybe I can do better than that. I used to use media-gfx/splashutils on a syystem that has not been powered up for a year or two.
I'll see if I can find all the bits.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Maitreya
Guru
Joined: 11 Jan 2006
Posts: 441
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Tue Aug 12, 2014 6:20 pm Post subject: |
|
|
Oniryczny,
What Maitreya said is to use the testing splashutils
Make the file /etc/portage/package.keywords and add the line media-gfx/splashutils
The testing media-gfx/splashutils may need other testing packages.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Tue Aug 12, 2014 7:35 pm Post subject: |
|
|
okay then,
I'm bit silly (as usual)
Can you just tell me what should I do to make splashutils work properly?
-r5 in portage tree? not yet 
_________________
cogito ergo sum |
|
| Back to top |
|
|
Maitreya
Guru
Joined: 11 Jan 2006
Posts: 441
|
| Posted: Wed Aug 13, 2014 10:22 pm Post subject: |
|
|
Ah sorry Oniryczny, I had no idea as to where you were and therefor made some assumptions and was short on info.
1.
When you look at the table on http://packages.gentoo.org/package/media-gfx/splashutils you can see which version are masked unstable or stable or masked even.
Like NeddySeagoon said; first get to the higher version in portage that isn't marked as stable yet.
You do this by adding an entry to /etc/portage/package.keywords
It looks like this:
| Code: |
media-gfx/splashutils ~amd64
|
or if you are on x86
| Code: |
media-gfx/splashutils ~x86
|
or if you don't want to be specific
| Code: |
media-gfx/splashutils ~*
|
or you could be version specific
| Code: |
=media-gfx/splashutils-1.5.4.4-r4 ~*
|
More on this http://wiki.gentoo.org/wiki/Knowledge_Base:Accepting_a_keyword_for_a_single_package
2.
If you re-emerge the package now, several thing could happen. If the just keyworded package needs others dependencies that are also marked as unstable then portage will tell you this. (if you try with --autounmask-write on your emerge command, exactly those dependencies will be available via etc-update into your /etc/portage/package.* files)
If it compiles: yay! However I think you have the same issue as I did and "r4" also had the issue for me. so.... on to 3!
3.
So the latest version in portage still doesnt work for us. Luckily some people use bugs.gentoo.org and share their experience for others to use. When you look at https://bugs.gentoo.org/show_bug.cgi?id=506124 people have been working on it.
To get this imaginary (not in portage) -r5 we have to use a local overlay. http://wiki.gentoo.org/wiki/Overlay/Local_overlay
Apply the patches from the bugzilla entry:
Get the patches needed from the original ebuild
| Code: |
mkdir -p /usr/local/portage/media-gfx/splashutils/files
cp /usr/portage/media-gfx/splashutils/files/*1.5.4.4* /usr/local/portage/media-gfx/splashutils/files/.
|
Then get the modified ebuild and add the patches (thank you motorsense!)
| Code: |
wget https://506124.bugs.gentoo.org/attachment.cgi?id=381320 -O /usr/local/portage/media-gfx/splashutils/splashutils-1.5.4.4-r5.ebuild
wget https://506124.bugs.gentoo.org/attachment.cgi?id=381322 -O /usr/local/portage/media-gfx/splashutils/files/libmng2-lcms2.patch
wget https://506124.bugs.gentoo.org/attachment.cgi?id=374106 -O /usr/local/portage/media-gfx/splashutils/files/splashutils-1.5.4.4-freetype251-splashutils.patch
wget https://506124.bugs.gentoo.org/attachment.cgi?id=374078 -O /usr/local/portage/media-gfx/splashutils/files/splashutils-1.5.4.4-freetype251.patch
|
Get your ebuild and files validated by portage, add it to package.keywords and emerge it!
| Code: |
echo "=media-gfx/splashutils-1.5.4.4-r5 ~*" >> /etc/portage/package.keywords
ebuild /usr/local/portage/media-gfx/splashutils/splashutils-1.5.4.4-r5.ebuild digest
emerge splashutils
|
|
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Thu Aug 21, 2014 10:32 am Post subject: |
|
|
No need to be sorry, Maitreya
You were right about -r4, it crashed as well.
I did all your suggestions but there isn't any -r5 in repository... | Code: |
# emerge -pv splashutils
* IMPORTANT: 2 config files in '/etc/portage' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ~] media-gfx/splashutils-1.5.4.4-r4 USE="fbcondecor mng png -gpm -hardened -truetype" 0 kB
Total: 1 package (1 new), Size of downloads: 0 kB
# |
_________________
cogito ergo sum |
|
| Back to top |
|
|
fenrirjk
n00b
Joined: 22 Mar 2013
Posts: 22
|
| Posted: Sun Aug 24, 2014 12:50 pm Post subject: |
|
|
Oniryczny, you need to set up the overlay, check point 3 of Maitreya's answer, especially the wiki guide.
Matreya, thank you really much for the help.
I did all your points, however I still have some problem:
| Code: |
>>> Emerging (3 of 3) media-gfx/splashutils-1.5.4.4-r5 from x-portage
* splashutils-lite-1.5.4.4.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* splashutils-gentoo-1.0.17.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* miscsplashutils-0.1.8.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* libpng-1.4.3.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* jpegsrc.v8a.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* freetype-2.3.12.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
* zlib-1.2.3.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking splashutils-lite-1.5.4.4.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Unpacking splashutils-gentoo-1.0.17.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Unpacking miscsplashutils-0.1.8.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Unpacking libpng-1.4.3.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Unpacking jpegsrc.v8a.tar.gz to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Unpacking freetype-2.3.12.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Unpacking zlib-1.2.3.tar.bz2 to /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Source unpacked in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work
>>> Preparing source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4 ...
* Applying splashutils-1.5.4.4-gentoo-typo-fix.patch ... [ ok ]
* Applying splashutils-1.5.4.4-freetype-bz2.patch ... [ ok ]
* Applying splashutils-1.5.4.4-freetype251.patch ... [ ok ]
* Applying splashutils-1.5.4.4-freetype251-splashutils.patch ... [ ok ]
* Applying splashutils-1.5.4.4-bzip2.patch ... [ ok ]
* Applying splashutils-1.5.4.4-multi-keyboard.patch ... [ ok ]
* Applying libmng2-lcms2.patch ... [ ok ]
* Running eautoreconf in '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4' ...
* Running libtoolize --install --copy --force --automake ... [ ok ]
* Running aclocal -I m4 ... [ ok ]
* Running autoconf ... [ ok ]
* Running autoheader ... [ ok ]
* Running automake --add-missing --copy --force-missing ... [ ok ]
* Running elibtoolize in: splashutils-1.5.4.4/
* Applying portage/1.2.0 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.4.2 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/freetype-2.3.12/
* Running elibtoolize in: splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/jpeg-8a/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/libpng-1.4.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Applying target-nm/2.4.2 patch ...
* Running elibtoolize in: splashutils-1.5.4.4/libs/zlib-1.2.3/
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4 ...
make -j9 CC=x86_64-pc-linux-gnu-gcc LIB=lib64 STRIP=true
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -Wl,-O1 -Wl,--as-needed fbres.c -o fbres
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -Wl,-O1 -Wl,--as-needed usleep.c -o usleep
true usleep
true fbres
make[1]: Entering directory `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/miscsplashutils-0.1.8/fbtruetype'
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -c -o fbtruetype.o fbtruetype.c
distcc[30295] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -c -o messages.o messages.c
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -c -o console.o console.c
distcc[30302] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -c -o ttf.o ttf.c
distcc[30308] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -c -o luxisri.o luxisri.c
distcc[30316] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[30323] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -Wl,-O1 -Wl,--as-needed -L/usr/lib64 -o fbtruetype -Wl,-O1 -Wl,--as-needed -L/usr/lib64 fbtruetype.o messages.o console.o ttf.o luxisri.o -lfreetype -lm
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -I/usr/include/freetype2 -Wl,-O1 -Wl,--as-needed -L/usr/lib64 -static -o fbtruetype.static -Wl,-O1 -Wl,--as-needed -L/usr/lib64 fbtruetype.o messages.o console.o ttf.o luxisri.o -L/usr/lib64 -lfreetype -lbz2 -lpng16 -lz -lm
true -s fbtruetype fbtruetype.static
make[1]: Leaving directory `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/miscsplashutils-0.1.8/fbtruetype'
make[1]: Entering directory `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/miscsplashutils-0.1.8/kbd'
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -c -o fgconsole.o fgconsole.c
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -c -o getfd.o getfd.c
distcc[30350] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[30351] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
x86_64-pc-linux-gnu-gcc -march=core2 -mtune=generic -O2 -pipe -Wl,-O1 -Wl,--as-needed fgconsole.o getfd.o -o fgconsole
make[1]: Leaving directory `/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/miscsplashutils-0.1.8/kbd'
* econf: updating splashutils-1.5.4.4/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/jpeg-8a/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/jpeg-8a/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/freetype-2.3.12/builds/unix/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating splashutils-1.5.4.4/libs/libpng-1.4.3/config.sub with /usr/share/gnuconfig/config.sub
* econf: updating splashutils-1.5.4.4/libs/libpng-1.4.3/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating splashutils-1.5.4.4/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --disable-silent-rules --disable-dependency-tracking --with-png --with-mng --with-gpm --with-ttf --with-ttf-kernel --enable-fbcondecor --docdir=/usr/share/doc/splashutils-1.5.4.4-r5 --with-freetype2-src=libs/freetype-2.3.12 --with-jpeg-src=libs/jpeg-8a --with-lpng-src=libs/libpng-1.4.3 --with-zlib-src=libs/zlib-1.2.3 --with-essential-libdir=/lib64
configure: loading site script /usr/share/config.site
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of x86_64-pc-linux-gnu-gcc... none
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... ok
checking for sysroot... no
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... (cached) /bin/sed
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for klcc... klcc
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking for ceilf in -lm... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for clock_gettime in -lrt... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_create in -lpthread... yes
checking for pthread.h... (cached) yes
checking for xxpthread_create in -lpthread... no
checking for pthread_create in -lpthread... (cached) yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for jpeg_set_defaults in -ljpeg... yes
checking gpm.h usability... yes
checking gpm.h presence... yes
checking for gpm.h... yes
checking for Gpm_Open in -lgpm... yes
checking libmng.h usability... yes
checking libmng.h presence... yes
checking for libmng.h... yes
checking for mng_initialize in -lmng... yes
checking for zlibVersion in -lz... yes
checking for cmsCloseProfile in -llcms2... yes
checking for libpng-config... /usr/bin/libpng-config
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for FREETYPE2... yes
checking for BZ2_bzDecompress in -lbz2... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating libs/Makefile
config.status: creating misc/Makefile
config.status: creating src/test/Makefile
config.status: creating docs/Makefile
config.status: creating scripts/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
>>> Source configured.
>>> Compiling source in /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4 ...
make -j9 CC=x86_64-pc-linux-gnu-gcc STRIP=true
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4/missing autoheader)
rm -f stamp-h1
touch config.h.in
make --silent all-recursive
Making all in libs
CONF libz.a
CONF libjpeg.a
CONF libfreetype.a
MAKE zlib.a
CONF libpng.a
MAKE libpng.a
MAKE libfreetype.a
MAKE libjpeg.a
/usr/bin/ld: warning: cannot find entry symbol main; defaulting to 0000000000400200
Making all in src
CREATE fbsplash.h
Making all in .
distcc[6224] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6245] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6248] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6243] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6263] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6247] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6273] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6276] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6281] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
libfbsplash.c: In function 'fbsplash_send':
libfbsplash.c:725:2: warning: format not a string literal and no format arguments [-Wformat-security]
libfbsplash.c: In function 'fbsplash_profile':
libfbsplash.c:677:8: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function 'fbsplash_check_sanity':
libfbsplash.c:571:7: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function 'fbsplash_cache_cleanup':
libfbsplash.c:498:8: warning: ignoring return value of 'system', declared with attribute warn_unused_result [-Wunused-result]
libfbsplash.c: In function 'fbsplash_parse_kcmdline':
libfbsplash.c:177:7: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result [-Wunused-result]
common.c: In function 'dev_create':
common.c:47:6: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
distcc[6305] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6320] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6343] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6349] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
ttf.c: In function 'text_get_output':
ttf.c:676:6: warning: ignoring return value of 'pipe', declared with attribute warn_unused_result [-Wunused-result]
ttf.c:687:6: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result]
distcc[6360] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
daemon.c: In function 'daemon_start':
daemon.c:682:7: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
daemon.c: In function 'thf_switch_ttymon':
daemon.c:506:7: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
distcc[6365] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6374] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6379] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
CC fbcondecor_helper-kernel.o
CC fbcondecor_helper-libfbsplash.o
CC fbcondecor_helper-libfbsplashrender.o
CC fbcondecor_helper-fbcon_decor.o
CC fbcondecor_helper-common.o
CC fbcondecor_helper-parse.o
image.c: In function 'is_png':
image.c:171:7: warning: ignoring return value of 'fread', declared with attribute warn_unused_result [-Wunused-result]
CC fbcondecor_helper-list.o
CC fbcondecor_helper-render.o
CC fbcondecor_helper-image.o
CC fbcondecor_helper-effects.o
CC fbcondecor_helper-ttf.o
distcc[6467] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6474] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6480] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
distcc[6485] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
daemon.c: In function 'daemon_start':
daemon.c:682:7: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
daemon.c: In function 'thf_switch_ttymon':
daemon.c:506:7: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
CREATE libfbsplash.pc
CREATE libfbsplashrender.pc
libfbsplashrender.c: In function 'vt_cursor_enable':
libfbsplashrender.c:598:7: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function 'fbsplashr_tty_silent_init':
libfbsplashrender.c:627:8: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function 'vt_cursor_disable':
libfbsplashrender.c:593:7: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
libfbsplashrender.c: In function 'fbsplashr_input_init':
libfbsplashrender.c:216:11: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -llcms2
collect2: error: ld returned 1 exit status
distcc[6877] ERROR: compile (null) on localhost failed
make[4]: *** [fbsplashctl] Error 1
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
* ERROR: media-gfx/splashutils-1.5.4.4-r5::x-portage failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=media-gfx/splashutils-1.5.4.4-r5::x-portage'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/splashutils-1.5.4.4-r5::x-portage'`.
* The complete build log is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/temp/environment'.
* Working directory: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4'
* S: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4'
>>> Failed to emerge media-gfx/splashutils-1.5.4.4-r5, Log file:
>>> '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/temp/build.log'
* Messages for package media-gfx/splashutils-1.5.4.4-r5:
* ERROR: media-gfx/splashutils-1.5.4.4-r5::x-portage failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=media-gfx/splashutils-1.5.4.4-r5::x-portage'`,
* the complete build log and the output of `emerge -pqv '=media-gfx/splashutils-1.5.4.4-r5::x-portage'`.
* The complete build log is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/temp/environment'.
* Working directory: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4'
* S: '/var/tmp/portage/media-gfx/splashutils-1.5.4.4-r5/work/splashutils-1.5.4.4'
* GNU info directory index is up-to-date.
!!! existing preserved libs:
>>> package: media-libs/mesa-10.0.4
* - /usr/lib64/libxatracker.so.2
* - /usr/lib64/libxatracker.so.2.0.0
* used by /usr/lib64/xorg/modules/drivers/vmware_drv.so (x11-drivers/xf86-video-vmware-13.0.1-r1)
>>> package: x11-libs/libdrm-2.4.52
* - /usr/lib64/libdrm_radeon.so.1
* - /usr/lib64/libdrm_radeon.so.1.0.1
* used by /usr/lib64/xorg/modules/drivers/radeon_drv.so (x11-drivers/xf86-video-ati-7.3.0)
* - /usr/lib64/libdrm_nouveau.so.2
* - /usr/lib64/libdrm_nouveau.so.2.0.0
* used by /usr/lib64/xorg/modules/drivers/nouveau_drv.so (x11-drivers/xf86-video-nouveau-1.0.10)
>>> package: sys-libs/gdbm-1.11
* - /usr/lib64/libgdbm.so.3
* - /usr/lib64/libgdbm.so.3.0.0
* used by /usr/lib64/python3.2/lib-dynload/_gdbm.cpython-32.so (dev-lang/python-3.2.5-r1)
* - /usr/lib64/libgdbm_compat.so.3
* - /usr/lib64/libgdbm_compat.so.3.0.0
* used by /usr/lib64/python3.2/lib-dynload/_dbm.cpython-32.so (dev-lang/python-3.2.5-r1)
Use emerge @preserved-rebuild to rebuild packages using these libraries
|
Any idea ? |
|
| Back to top |
|
|
Hu
Moderator
Joined: 06 Mar 2007
Posts: 21595
|
| Posted: Sun Aug 24, 2014 4:11 pm Post subject: |
|
|
| fenrirjk: you are missing an acceptable lcms2 library. This is normally provided by media-libs/lcms. There seems to be a problem with the ebuild you used though. It allowed the build system to enable silent mode, which makes it harder to debug problems. Please report this to the maintainer so that the ebuild can be switched to force the build to print out the commands it runs. |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Sun Aug 24, 2014 8:58 pm Post subject: |
|
|
What about me?
_________________
cogito ergo sum |
|
| Back to top |
|
|
fenrirjk
n00b
Joined: 22 Mar 2013
Posts: 22
|
| Posted: Sun Aug 24, 2014 10:00 pm Post subject: |
|
|
| Oniryczny wrote: | | What about me? |
| fenrirjk wrote: | Oniryczny, you need to set up the overlay, check point 3 of Maitreya's answer, especially the wiki guide.
...
|
| Hu wrote: | | fenrirjk: you are missing an acceptable lcms2 library. This is normally provided by media-libs/lcms. There seems to be a problem with the ebuild you used though. It allowed the build system to enable silent mode, which makes it harder to debug problems. Please report this to the maintainer so that the ebuild can be switched to force the build to print out the commands it runs. |
My lcms library:
I think I'll just wait a fixed version to come on the repository
Too much troubles just for a bootsplash... |
|
| Back to top |
|
|
ipic
Guru
Joined: 29 Dec 2003
Posts: 377
Location: UK
|
| Posted: Mon Aug 25, 2014 9:42 am Post subject: |
|
|
Just reporting, approach described by Maitreya worked fine for me. Many thanks, this has been an annoyance for some time.
Ian |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Thu Aug 28, 2014 7:38 pm Post subject: |
|
|
I thought that Maitreya wrote all necessary things to do...
_________________
cogito ergo sum |
|
| Back to top |
|
|
Maitreya
Guru
Joined: 11 Jan 2006
Posts: 441
|
| Posted: Thu Aug 28, 2014 7:46 pm Post subject: |
|
|
Just make sure the packages (freetype and BOTH slots of lcms like said above) have static-libs use flag set.
Then my instructions should be enough. Also when you ask for help in these forums, do not forget to switch to english/C as otherwise far less people can help you. |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Fri Aug 29, 2014 6:40 pm Post subject: |
|
|
| Code: | ...
>>> Installing (1 of 1) media-gfx/splashutils-1.5.4.4-r5
* It is required that you add 'console=tty1' to your kernel
* command line parameters.
*
* After these modifications, the relevant part of the kernel command
* line might look like:
* splash=silent,fadein,theme:emergence console=tty1
*
* The sample Gentoo themes (emergence, gentoo) have been removed from the
* core splashutils package. To get some themes you might want to emerge:
* media-gfx/splash-themes-livecd
* media-gfx/splash-themes-gentoo
>>> Recording media-gfx/splashutils in "world" favorites file...
* Messages for package media-gfx/splashutils-1.5.4.4-r5:
* It is required that you add 'console=tty1' to your kernel
* command line parameters.
*
* After these modifications, the relevant part of the kernel command
* line might look like:
* splash=silent,fadein,theme:emergence console=tty1
*
* The sample Gentoo themes (emergence, gentoo) have been removed from the
* core splashutils package. To get some themes you might want to emerge:
* media-gfx/splash-themes-livecd
* media-gfx/splash-themes-gentoo
>>> Auto-cleaning packages...
>>> No outdated packages were found on your system.
* GNU info directory index is up-to-date. |
Thank you, Maitreya
it was all goos except me being silly that I forgot my local overlay was not in /usr/local/portage but in /usr/portage/local
After changing directories to proper ones I emerged -r5 successfully
_________________
cogito ergo sum |
|
| Back to top |
|
|
nollo
n00b
Joined: 15 Mar 2013
Posts: 43
Location: Ferrara - Italy
|
| Posted: Sat Sep 13, 2014 2:14 pm Post subject: |
|
|
| Code: | flaggie splashutils +truetype
ln -s /usr/include/freetype2 /usr/include/freetype
emerge -av splashutils |
It worked for me. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
or wait for portage to pick it up from bugzilla. It is working fine here on multiple systems :