| View previous topic :: View next topic |
| Author |
Message |
wuesti
Apprentice
Joined: 07 Mar 2009
Posts: 191
|
 Posted: Mon Jun 23, 2014 9:33 pm Post subject: [gelöst]The EDID read for display device DFP-1 is invalid |
 |
|
Moin Moin,
der HDMI-Monitor wird unter Gentoo nicht mehr erkannt und fällt in eine Minimalauflösung von 800*600 Punkten zurück: | Code: | xrandr
Screen 0: minimum 8 x 8, current 2080 x 1024, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
640x480 75.0 72.8 59.9
HDMI-0 connected primary 800x600+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 |
Unter Ubuntu funktioniert die Erkennung: | Code: | Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
.....
HDMI-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 475mm x 267mm
1920x1080 60.0 + 50.0 59.9
1920x1080i 60.1 50.0 60.0
1680x1050 59.9
1280x1024 75.0 60.0*
1440x900 59.9
1280x960 60.0
1280x800 59.9
1152x864 75.0
1280x720 60.0 50.0 59.9
1440x576 50.0
1024x768 75.1 70.1 60.0
1440x480 60.0 59.9
832x624 74.6
800x600 72.2 75.0 60.3 56.2
720x576 50.0
720x480 60.0 59.9
640x480 75.0 66.7 60.0 59.9
720x400 70.1 |
In der /var/log/X.log.0 finde ich folgende Fehlermeldung: | Code: | [ 3841.486] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-1 is invalid: the
[ 3841.486] (WW) NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid. |
Der Versuch einen neuen Mode zu kreieren scheitert: | Code: | ~ % cvt 1920 1080 60
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
~ % xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120
~ % xrandr --addmode HDMI-0 "1920x1080_60.00"
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 139 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
~ % xrandr --output HDMI-0 --mode "1920x1080_60.00"
xrandr: cannot find mode 1920x1080_60.00
kai@kais_quad ~ % xrandr
Screen 0: minimum 8 x 8, current 2080 x 1024, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
640x480 75.0 72.8 59.9
HDMI-0 connected primary 800x600+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 60.3*+
1920x1080_60.00 (0x2a9) 173.0MHz
h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz
v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz |
Da die Erkennung früher funktioniert hat, wäre es schön, wenn ich sie wieder in Gang bekäme...
Doch zum Anfang wäre eine funktionierende Modeline auch nicht schlecht.
Kann jemand helfen?
_________________
Linux-User seit 1999
Last edited by wuesti on Wed Jun 25, 2014 6:35 pm; edited 1 time in total |
|
| Back to top |
|
 |
wuesti
Apprentice
Joined: 07 Mar 2009
Posts: 191
|
| Posted: Wed Jun 25, 2014 6:34 pm Post subject: |
|
|
Nach diversen Stunden mit unserem Freund G. aus USA habe ich die die Lösung gefunden:
| Code: | cat /etc/X11/xorg.conf.d/20-nvidia.conf
Section "ServerLayout"
Identifier "ASUS-an-HDMI"
Screen 0 "Screen0"
EndSection
#######################-HDMI-###########
Section "Device"
Identifier "Device-HDMI"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 610"
BusID "PCI:1:0:0"
Screen 0
Option "UseEDIDFreqs" "False"
Option "UseEDIDDpi" "False"
Option "IgnoreEDID" "True"
#Option "UseEDID" "false"
Option "ModeValidation" "NoVesaModes,NoXServerModes,NoEDIDModes"
EndSection
Section "Monitor"
Identifier "ASUS-HDMI"
VendorName "Unknown"
ModelName "ASUS VS229"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
Modeline "1920x1080" 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Option "Preferred Mode" "1920x1080"
Option "ExactModeTimingsDVI" "True"
Option "DPI" "104x104"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device-HDMI"
Monitor "ASUS-HDMI"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "HDMI-0: 1920x1080"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection |
Quellen:
http://askubuntu.com/questions/188060/force-video-mode-without-edid-information
https://wiki.archlinux.org/index.php/NVIDIA#Multiple_monitors
_________________
Linux-User seit 1999 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
