Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
installazione gentoo x86_64 - emerge non compila [risolto]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
bi-andrea
Apprentice
Apprentice


Joined: 09 Mar 2010
Posts: 167
Location: cesenatico

PostPosted: Fri Jun 28, 2013 4:42 pm    Post subject: installazione gentoo x86_64 - emerge non compila [risolto] Reply with quote

volevo usare genkernel per compilare il kernel ma per una macchina adm64 da una macchina x86, qual'è la riga da configurare in genkernel.conf?
_________________
Quando arrivi a Linux è un trauma, abituati a Windows, quando arrivi a Gentoo è uno spavento col brivido , però quando lo capisci sei uscito dall'università "GNU/Linux" ;)


Last edited by bi-andrea on Sun Dec 08, 2013 5:35 pm; edited 4 times in total
Back to top
View user's profile Send private message
djinnZ
Advocate
Advocate


Joined: 02 Nov 2006
Posts: 4735
Location: not so far from an evil, world famous volcano. Under dictatorship, idiocracy, property of banks...

PostPosted: Fri Jun 28, 2013 6:24 pm    Post subject: Reply with quote

ma salvarti la conf come esempio...

genkernel --arch-override= o imposti ARCH_OVERRIDE per forzare amd64
ma se devi agire in crossbuild ci sono delle variabili apposite nella sezione

/etc/genkernel.conf wrote:
# =========Low Level Compile Settings=========
#
# GNU Make to use for kernel. See also the --kernel-make command line option.
#KERNEL_MAKE="make"

# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
# command line option.
#KERNEL_CC="gcc"

# Assembler to use for the kernel. See also the --kernel-as command line
# option.
#KERNEL_AS="as"

# Linker to use for the kernel. See also the --kernel-ld command line option.
#KERNEL_LD="ld"

# GNU Make to use for the utilities. See also the --utils-make command line
# option.
#UTILS_MAKE="make"

# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
# command line option.
#UTILS_CC="gcc"
# Assembler to use for the utilities. See also the --utils-as command line
# option.
#UTILS_AS="as"

# Linker to use for the utilities. See also the --utils-ld command line
# option.
#UTILS_LD="ld"


# Common prefix of cros compile commands
#UTILS_CROSS_COMPILE="x86_64-pc-linux-gnu"


# Value of CROSS_COMPILE utils variable
# during kernel compilation
#KERNEL_CROSS_COMPILE="x86_64-pc-linux-gnu"

_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt:wink:
mala tempora currunt...mater stultorum semper pregna est :evil:
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist :wink:
Back to top
View user's profile Send private message
bi-andrea
Apprentice
Apprentice


Joined: 09 Mar 2010
Posts: 167
Location: cesenatico

PostPosted: Sat Jun 29, 2013 3:54 pm    Post subject: Reply with quote

giusto basta mettere .conf nel posto giusto dove lo cerca genkernel, ma siccome non riesco a installarlo volevo mettere un kernel per avere un sistema senza andare in chroot.
ho sistemato genkernel.conf e si presenta così
Code:
# =========Low Level Compile Settings=========
#
# GNU Make to use for kernel.  See also the --kernel-make command line option.
KERNEL_MAKE="make"

# Compiler to use for the kernel (e.g. distcc).  See also the --kernel-cc
# command line option.
KERNEL_CC="gcc"

# Assembler to use for the kernel.  See also the --kernel-as command line
# option.
#KERNEL_AS="as"

# Linker to use for the kernel.  See also the --kernel-ld command line option.
#KERNEL_LD="ld"

# GNU Make to use for the utilities.  See also the --utils-make command line
# option.
UTILS_MAKE="make"

# Compiler to use for the utilities (e.g. distcc).  See also the --utils-cc
# command line option.
UTILS_CC="gcc"

# Assembler to use for the utilities.  See also the --utils-as command line
# option.
#UTILS_AS="as"

# Linker to use for the utilities.  See also the --utils-ld command line
# option.
#UTILS_LD="ld"


# Common prefix of cros compile commands
UTILS_CROSS_COMPILE="x86_64-pc-linux-gnu"


# Value of CROSS_COMPILE utils variable
# during kernel compilation
KERNEL_CROSS_COMPILE="x86_64-pc-linux-gnu"


in resto è rimasto immutato, ho digitato l'unico 64 che mi acetta
Code:
genkernel --arch-override=ia64 all

e mi ha restituito questo

Code:
genkernel --arch-override=ia64 all
* Gentoo Linux Genkernel; Version 3.4.45
* Running with options: --arch-override=ia64 all

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..

* Linux Kernel 3.7.10-gentoo for ia64...
* .. with config file /usr/share/genkernel/arch/ia64/kernel-config
* kernel: Using config from /usr/share/genkernel/arch/ia64/kernel-config
*         Previous config backed up to .config--2013-06-25--20-30-12.bak
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
* ERROR: Failed to compile the "prepare" target...
*
* -- Grepping log... --
*
*  SHIPPED scripts/kconfig/zconf.lex.c
*  SHIPPED scripts/kconfig/zconf.hash.c
*  HOSTCC  scripts/kconfig/zconf.tab.o
*  HOSTLD  scripts/kconfig/conf
*scripts/kconfig/conf --oldconfig Kconfig
*.config:907:warning: override: reassigning to symbol USB_ARCH_HAS_HCD
*.config:908:warning: override: reassigning to symbol USB_ARCH_HAS_OHCI
*.config:909:warning: override: reassigning to symbol USB_ARCH_HAS_EHCI
*.config:910:warning: override: reassigning to symbol USB
*.config:911:warning: override: reassigning to symbol USB_DEBUG
*--
*choice[1-5?]: Memory model
*> 1. Flat Memory (FLATMEM_MANUAL)
*  2. Sparse Memory (SPARSEMEM_MANUAL)
*choice[1-2]: 1
*Allow for memory compaction (COMPACTION) [Y/n/?] (NEW) Page migration (MIGRATION) [Y/?] y
*Enable KSM for page merging (KSM) [N/y/?] (NEW) Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] (NEW) Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] (NEW) Transparent Hugepage Support (TRANSPARENT_HUGEPAGE) [N/y/?] (NEW) Cross Memory Support (CROSS_MEMORY_ATTACH) [Y/n/?] (NEW) Enable cleancache driver to cache clean pages if tmem is present (CLEANCACHE) [N/y/?] (NEW) Enable frontswap to cache swap pages if tmem is present (FRONTSWAP) [N/y/?] (NEW) Allocate 3rd-level pagetables from highmem (HIGHPTE) [N/y/?] (NEW) Check for low memory corruption (X86_CHECK_BIOS_CORRUPTION) [N/y/?] (NEW) Amount of low memory, in kilobytes, to reserve for the BIOS (X86_RESERVE_LOW) [64] (NEW) Math emulation (MATH_EMULATION) [N/y/?] (NEW) MTRR (Memory Type Range Register) support (MTRR) [Y/n/?] (NEW)   MTRR cleanup support (MTRR_SANITIZER) [Y/n/?] (NEW)     MTRR cleanup enable value (0-1) (MTRR_SANITIZER_ENABLE_DEFAULT) [0] (NEW)     MTRR cleanup spare reg num (0-7) (MTRR_SANITIZER_SPARE_REG_NR_DEFAULT) [1] (NEW)   x86 PAT support (X86_PAT) [Y/n/?] (NEW) x86 architectural random number generator (ARCH_RANDOM) [Y/n/?] (NEW) Supervisor Mode Access Prevention (X86_SMAP) [Y/n/?] (NEW) EFI runtime service support (EFI) [Y/n/?] y
*--
*  Processor (ACPI_PROCESSOR) [Y/n/m/?] y
*  Processor Aggregator (ACPI_PROCESSOR_AGGREGATOR) [N/m/y/?] (NEW)   Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
*  Disable ACPI for systems before Jan 1st this year (ACPI_BLACKLIST_YEAR) [0] 0
*  Debug Statements (ACPI_DEBUG) [N/y/?] n
*  PCI slot detection driver (ACPI_PCI_SLOT) [N/m/y/?] (NEW)   Power Management Timer Support (X86_PM_TIMER) [Y/n/?] (NEW)   Container and Module Devices (EXPERIMENTAL) (ACPI_CONTAINER) [Y/?] y
*  Smart Battery System (ACPI_SBS) [N/m/y/?] (NEW)   Hardware Error Device (ACPI_HED) [N/m/y/?] (NEW)   Allow ACPI methods to be inserted/replaced at run time (ACPI_CUSTOM_METHOD) [N/m/y/?] (NEW)   Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] (NEW)   ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] (NEW) *
*--
*    2. MMConfig (PCI_GOMMCONFIG) (NEW)
*    3. Direct (PCI_GODIRECT) (NEW)[/quote]
*  > 4. Any (PCI_GOANY) (NEW)
*  choice[1-4?]:   Read CNB20LE Host Bridge Windows (PCI_CNB20LE_QUIRK) [N/y/?] (NEW)   PCI Express support (PCIEPORTBUS) [Y/n/?] y
*    PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/m/?] y
*    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
*      PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] (NEW)       PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] (NEW)     PCI Express ASPM control (PCIEASPM) [Y/n/?] (NEW)       Debug PCI Express ASPM (PCIEASPM_DEBUG) [N/y/?] (NEW)       Default ASPM policy
*--
*  *
*  * Please see Documentation/ide/ide.txt for help/info on IDE drives
*  *
*  Support for SATA (deprecated; conflicts with libata SATA driver) (BLK_DEV_IDE_SATA) [N/y/?] n
*  generic ATA/ATAPI disk support (IDE_GD) [Y/n/m/?] (NEW)     ATA disk support (IDE_GD_ATA) [Y/n/?] (NEW)     ATAPI floppy support (IDE_GD_ATAPI) [N/y/?] (NEW)   Include IDE/ATAPI CDROM support (BLK_DEV_IDECD) [Y/n/m/?] y
*    Verbose error logging for IDE/ATAPI CDROM driver (BLK_DEV_IDECD_VERBOSE_ERRORS) [Y/n/?] (NEW)   Include IDE/ATAPI TAPE support (BLK_DEV_IDETAPE) [N/m/y/?] n
*--
*SCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
*SCSI CDROM support (BLK_DEV_SR) [N/m/y/?] n
*SCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
*SCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
*Probe all LUNs on each SCSI device (SCSI_MULTI_LUN) [Y/n/?] y
*Verbose SCSI error reporting (kernel size +=12K) (SCSI_CONSTANTS) [Y/n/?] y
*--
*
*Sony MemoryStick card support (EXPERIMENTAL) (MEMSTICK) [N/m/y/?] (NEW) *
* Accessibility support
*
*Accessibility support (ACCESSIBILITY) [N/y/?] (NEW) *
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [N/y/?] (NEW) *
*--
*OCFS2 file system support (OCFS2_FS) [M/n/?] m
*  O2CB Kernelspace Clustering (OCFS2_FS_O2CB) [M/n/?] (NEW)   OCFS2 statistics (OCFS2_FS_STATS) [Y/n/?] (NEW)   OCFS2 logging support (OCFS2_DEBUG_MASKLOG) [Y/n/?] y
*  OCFS2 expensive checks (OCFS2_DEBUG_FS) [N/y/?] (NEW) Btrfs filesystem (EXPERIMENTAL) Unstable disk format (BTRFS_FS) [N/m/y/?] (NEW) NILFS2 file system support (EXPERIMENTAL) (NILFS2_FS) [N/m/y/?] (NEW) Enable POSIX file locking API (FILE_LOCKING) [Y/n/?] (NEW) Dnotify support (DNOTIFY) [Y/n/?] y
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [N/y/?] (NEW) Quota support (QUOTA) [Y/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] (NEW) Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] (NEW) Additional quota sanity checks (QUOTA_DEBUG) [N/y/?] (NEW) Old quota format support (QFMT_V1) [N/m/y/?] (NEW) Quota format vfsv0 and vfsv1 support (QFMT_V2) [N/m/y/?] (NEW) Kernel automounter version 4 support (also supports v3) (AUTOFS4_FS) [N/m/y/?] n
*--
*Stack utilization instrumentation (DEBUG_STACK_USAGE) [N/y/?] (NEW) kobject debugging (DEBUG_KOBJECT) [N/y/?] n
*Highmem debugging (DEBUG_HIGHMEM) [N/y/?] (NEW) Verbose BUG() reporting (adds 70K) (DEBUG_BUGVERBOSE) [Y/n/?] (NEW) Compile the kernel with debug info (DEBUG_INFO) [N/y/?] n
*Debug VM (DEBUG_VM) [N/y/?] n
*Debug VM translations (DEBUG_VIRTUAL) [N/y/?] (NEW) Debug filesystem writers count (DEBUG_WRITECOUNT) [N/y/?] (NEW) Debug memory initialisation (DEBUG_MEMORY_INIT) [N/y/?] (NEW) Debug linked list manipulation (DEBUG_LIST) [N/y/?] n
*Linked list sorting test (TEST_LIST_SORT) [N/y/?] (NEW) Debug SG table operations (DEBUG_SG) [N/y/?] (NEW) Debug notifier call chains (DEBUG_NOTIFIERS) [N/y/?] (NEW) Debug credential management (DEBUG_CREDENTIALS) [N/y/?] (NEW) Compile the kernel with frame pointers (FRAME_POINTER) [Y/n/?] (NEW) Delay each boot printk message by N milliseconds (BOOT_PRINTK_DELAY) [N/y/?] (NEW) torture tests for RCU (RCU_TORTURE_TEST) [N/m/y/?] n
*RCU CPU stall timeout in seconds (RCU_CPU_STALL_TIMEOUT) [60] (NEW) Print additional diagnostics on RCU CPU stall (RCU_CPU_STALL_INFO) [N/y/?] (NEW) Enable tracing for RCU (RCU_TRACE) [N/y/?] (NEW) Self test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] (NEW) Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] (NEW) Force weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] (NEW) Debug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] (NEW) Linux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] (NEW) Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] (NEW) Fault-injection framework (FAULT_INJECTION) [N/y/?] n
*--
* Running with options: --arch-override=ia64 all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
*
* ERROR: Failed to compile the "prepare" target...
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!

_________________
Quando arrivi a Linux è un trauma, abituati a Windows, quando arrivi a Gentoo è uno spavento col brivido , però quando lo capisci sei uscito dall'università "GNU/Linux" ;)
Back to top
View user's profile Send private message
djinnZ
Advocate
Advocate


Joined: 02 Nov 2006
Posts: 4735
Location: not so far from an evil, world famous volcano. Under dictatorship, idiocracy, property of banks...

PostPosted: Sun Jun 30, 2013 1:18 pm    Post subject: Reply with quote

è da una vita che non provo cose del genere ma...
--arch-override=x86_64 (non mi pare che ia64 sia supportato) implica
Code:
euse -E multitarget ; emerge -DNu @world
e non so che altro per abilitare il compilatore al crosslinking.
Nel dubbio emerge -1 genkernel e ricrei i file di conf a partire da zero (non è che hai seguito quel suggerimento imbecille della guida di sovrascrivere il repository delle configurazioni?!).
Se hai copiato solo l'estratto in genkernel.conf è ovvio che ti da errore.

ma non credo che possa funzionare ormai e quindi devi prima leggerti

http://www.gentoo.org/proj/it/base/embedded/handbook/?part=1&chap=2
ed infine
http://www.gentoo.org/proj/it/base/embedded/handbook/?part=1&chap=4
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt:wink:
mala tempora currunt...mater stultorum semper pregna est :evil:
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist :wink:
Back to top
View user's profile Send private message
bi-andrea
Apprentice
Apprentice


Joined: 09 Mar 2010
Posts: 167
Location: cesenatico

PostPosted: Sat Sep 07, 2013 7:43 pm    Post subject: Reply with quote

ho capito come mi devo muovere e ringrazio per i consigli, ma non ho il tempo per farlo adesso, quindi pensavo di vedere direttamente nella gentoo_amd64 se si risolve il problema....

io digito
Quote:
emerge gentoo-sources


ho indirizzato la schermata in un file e si presenta così
Quote:

* IMPORTANT: 5 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.

Calculating dependencies ... done!

>>> Verifying ebuild manifests

>>> Emerging (1 of 2) sys-devel/bc-1.06.95
* bc-1.06.95.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking bc-1.06.95.tar.bz2 to /var/tmp/portage/sys-devel/bc-1.06.95/work
>>> Source unpacked in /var/tmp/portage/sys-devel/bc-1.06.95/work
>>> Compiling source in /var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95 ...
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --with-readline --without-libedit
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95/config.log
* ERROR: sys-devel/bc-1.06.95 failed (compile phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 2414: Called econf '--with-readline' '--without-libedit'
* phase-helpers.sh, line 521: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=sys-devel/bc-1.06.95'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/bc-1.06.95'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'
* S: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'

>>> Failed to emerge sys-devel/bc-1.06.95, Log file:

>>> '/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log'
* Messages for package sys-devel/bc-1.06.95:
* ERROR: sys-devel/bc-1.06.95 failed (compile phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 2414: Called econf '--with-readline' '--without-libedit'
* phase-helpers.sh, line 521: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=sys-devel/bc-1.06.95'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/bc-1.06.95'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'
* S: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'



il mio /etc/portage/make.conf
Quote:

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.

CFLAGS="-marc=athlon64 -2 -pipe"

CXXFLAGS="${CFLAGS}"

CHOST="x86_64-pc-linux-gnu"

USE="X gdu extras device-mapper policykit jpeg xulrunner mp3 mp4 mpeg dvd buildtime dvdr cdr cdparanoia cdda mplayer pulseaudio sound qt4"

ACCEPT_KEYBORDS="adm64"

PORTDIR=/usr/portage

DISTDIR=/usr/portage/distfiles

PKDIR=/usr/portage/packages

AUTOCLEAN="yes"

CCACE_SIZE="2G"

GENTOO_MIRRORS="rsync://212.219.56.139/www.ibiblio.org/gentoo/ fpt://91.121.125.139/gentoo/distfiles/ http://distfiles.gentoo.org/distfiles/"

INPUT_DEVICES="evdev keyboard mouse"

#VIDEO_CARDS="dummy fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident v4l vesa via vmware -apm -ark -ast -chips -cirrus -epson -fglrx -geode -i128 -i740 -qxl -rendition -s3 -s3virge -siliconmotion -sisusb -tga -tseng -virtualbox"

#PORTAGE_BINHOST = "file:///usr/portage/distfile"

#PORTAGE_BINHOST = "ftp://pbhu:pbhu @ pbh.edoceo.com /"

FEATURES="buildpkg"

GENTOO_MIRRORS="fpt://91.121.125.139/gentoo/distfiles/ rsync://gentoo.lagis.at/gentoo-distfiles/ http://gentoo.lagis.at/ ftp://gentoo.lagis.at/ http://gd.tuwien.ac.at/opsys/linux/gentoo/ ftp://gd.tuwien.ac.at/opsys/linux/gentoo/ rsync://gd.tuwien.ac.at/opsys/linux/gentoo/ ftp://ftp.free.fr/mirrors/ftp.gentoo.org/ ftp://gentoo.imj.fr/pub/gentoo/ http://mirrors.linuxant.fr/distfiles.gentoo.org/ ftp://mirrors.linuxant.fr/distfiles.gentoo.org/ http://gentoo.modulix.net/gentoo/ ftp://mirror.ovh.net/gentoo-distfiles/ http://mirror.ovh.net/gentoo-distfiles/ ftp://de-mirror.org/gentoo/ http://de-mirror.org/gentoo/ rsync://de-mirror.org/gentoo/ ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo http://gentoo.mneisen.org/ http://mirror.netcologne.de/gentoo/ ftp://mirror.netcologne.de/gentoo/ rsync://mirror.netcologne.de/gentoo/ rsync://mirror.opteamax.de/gentoo/ http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ rsync://gentoo.tiscali.nl/gentoo/ ftp://gentoo.tiscali.nl/pub/mirror/gentoo/ http://gentoo.tiscali.nl/ ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo http://ftp.snt.utwente.nl/pub/os/linux/gentoo rsync://ftp.snt.utwente.nl/gentoo"

USE_PYTHON="2.6 2.7 3.1 3.2"

PYTHON_INCLUDES=/usr/include/python2.7

PYTHON_SITE_PACKAGES=/usr/lib/python2.7/site-packages

PORTAGE_TMPDIR=/var/tmp[/quote

il problema è quando arriva quì
Quote:

checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.

quindi presumo make.conf impostato male
_________________
Quando arrivi a Linux è un trauma, abituati a Windows, quando arrivi a Gentoo è uno spavento col brivido , però quando lo capisci sei uscito dall'università "GNU/Linux" ;)
Back to top
View user's profile Send private message
bi-andrea
Apprentice
Apprentice


Joined: 09 Mar 2010
Posts: 167
Location: cesenatico

PostPosted: Sun Dec 08, 2013 5:33 pm    Post subject: Reply with quote

ho sistemato e installato 1089 pacchetti in un colpo senza interruzioni
Code:
####################################################
## ATTENTION: THIS IS THE MAKE.CONF ON THE LIVECD ##
## PLEASE EDIT /mnt/gentoo/etc/make.conf INSTEAD  ##
####################################################
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -pipe"
CXXFLAGS="-O2 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.

CHOST="x86_64-pc-linux-gnu"

# These are the USE flags that were used in addition to what is provided by the
# profile used for building.

USE="X consolekit kde semantic-desktop accessibility nautilus eds avahi vino gnome-keyring networkmanager policykit libnotify alsa nouveau jpeg gif tiff opengl -hal dbus cairo qt3support mmx bindist sse sse2 branding livecd loop-aes socks5 gnome qt4 -x264 -mp3 -mp4 -mpeg2 -mpeg4pt2 -xvid -a52 -real -dvdnav -faac -amr  atm fbcondecor mng png portaudio truetype usb"

VIDEO_CARDS="qxl virtualbox nouveau glint intel mach64 mga neomagic nv r128 radeon savage tdfx trident vesa via vmware cirrus ast chips i128 i740 imstt s3virge tseng v4l vermilion"

INPUT_DEVICES="evdev keyboard mouse synaptics virtualbox ps2mouse"

MAKEOPTS=-j2

#LINGUAS="it"

#PORTDIR_OVERLAY="/usr/local/portage"

ACCEPT_LICENSE="@BINARY-REDISTRIBUTABLE"

#KDIR=/usr/src/linux

#XFCE_PLUGINS="menu"

#source /var/lib/layman/make.conf

FEATURES="buildpkg buildpkgonly buildsyspkg userfetch"
#FEATURES="-userfetch candy"

ACCEPT_KEYWORDS="amd64"


VIDEO_CARDS="intel nouveau radeon vmware"

SYNC=rsync://rsync.gentoo.org/gentoo-portage

PYTHON_TARGETS="python2_5 python2_6 python2_7 python3_1 python3_2"
PYTHON_SINGLE_TARGET="python2_6"

DRACUT_MODULES="plymounth"

LDFLAGS="${LDFLAGS}"
STAGE1_CFLAGS="${STAGE1_CFLAGS}"
LIBPATH="${LIBPATH}"
BOOT_CFLAGS="${BOOT_CFLAGS}"

_________________
Quando arrivi a Linux è un trauma, abituati a Windows, quando arrivi a Gentoo è uno spavento col brivido , però quando lo capisci sei uscito dall'università "GNU/Linux" ;)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum