| View previous topic :: View next topic |
| Author |
Message |
dermartn
n00b
Joined: 06 Dec 2004
Posts: 63
|
 Posted: Tue Oct 22, 2013 12:01 pm Post subject: usb mouse not recognized |
 |
|
Hi,
I just bought a usb mouse: Microsoft Wireless Mobile Mouse 1000.
It is wireless, but has it's own usb-dongle, so it is like a wired mouse for the system. It works fine on Windows and Mac. But it is not working on my Gentoo system (kernel 3.10.7, KDE).
My other usb mouse works well, and there are no other usb problems on my system. The usb dongle (Microsoft Nano Transceiver is found by lsusb).
Any ideas get it working?
Thanks
-dermartn |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54209
Location: 56N 3W
|
| Posted: Tue Oct 22, 2013 6:54 pm Post subject: |
|
|
dermartn,
You will have a missing kernel option.
We need the vendor and device IDs from lsusb to tell which modue
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
dermartn
n00b
Joined: 06 Dec 2004
Posts: 63
|
| Posted: Wed Oct 23, 2013 3:44 pm Post subject: |
|
|
Hi,
there some lsusb output:
| Code: |
lsusb
Bus 002 Device 004: ID 045e:07b2 Microsoft Corp. |
| Code: |
lsusb -s 002:004 -v
Bus 002 Device 004: ID 045e:07b2 Microsoft Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x045e Microsoft Corp.
idProduct 0x07b2
bcdDevice 7.04
iManufacturer 1 Microsoft
iProduct 2 Microsoft� Nano Transceiver v1.0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 84
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 57
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 223
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 319
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
|
Thanks for your ideas. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54209
Location: 56N 3W
|
| Posted: Wed Oct 23, 2013 7:50 pm Post subject: |
|
|
dermartn,
As an educated guess | Code: | | < > Microsoft non-fully HID-compliant devices |
as grepping the kernel does not produce any useful hits for your device ID.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
dermartn
n00b
Joined: 06 Dec 2004
Posts: 63
|
| Posted: Thu Oct 24, 2013 6:25 am Post subject: |
|
|
Hi,
I already activated this in my kernel config, but without an working result...
By the way I have to check it again. I found it in the .config file, but did not see it in the menuconfig options. Perhaps there is something wrong here.
thanks a lot for your help. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54209
Location: 56N 3W
|
| Posted: Thu Oct 24, 2013 7:15 pm Post subject: |
|
|
dermartn,
If its not in menuconfig then something it depends on is off.
The help says | Code: | x CONFIG_HID_MICROSOFT: x
x x
x Support for Microsoft devices that are not fully compliant with HID standard. x
x x
x Symbol: HID_MICROSOFT [=n] x
x Type : tristate x
x Prompt: Microsoft non-fully HID-compliant devices x
x Location: x
x -> Device Drivers x
x -> HID support x
x -> HID bus support (HID [=y]) x
x -> Special HID drivers x
x Defined at drivers/hid/Kconfig:395 x
x Depends on: INPUT [=y] && HID [=y] |
Anything where the Depends on: logic does not evaluate to true is hidden in menuconfig.
You must never edit the .config with a text editor.
Post your lspci output and put your .config on a pastebin site.
Post yo
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
dermartn
n00b
Joined: 06 Dec 2004
Posts: 63
|
| Posted: Sun Oct 27, 2013 7:36 pm Post subject: |
|
|
Hi,
INPUT and HID are activated, but I can not see "Microsoft non-fully HID-compliant devices" in menu.
I also deleted my .config file and checked the default/"naked" config. All three options (MICROSOFT, INPUT and HID) are activeted in .config, too. But also I can not see the entry in menu ;-(
lspci: http://pastebin.com/3yN2Yiu2
kernel .config: http://pastebin.com/PZwRhje5
Thanks for your help. |
|
| Back to top |
|
|
|
Kernel & Hardware
